Put in new fuel pump and float assemble, gas gauge goes to correct amount then drops to empty
SOURCE: replace crankshaft sensor
Crank sensor on that car should be located near the pulley end of the motor, and near the firewall side. Fairly easy to get to.
SOURCE: Fuel gauge goes to empty when I know there is still a 1/2 tank of fuel.
sounds like a faulty float on the fuel pump not sending the correct signal to the guage. if helpful please rate
SOURCE: 06 pt crusier wont start
fuel pump has`a`cut-off switch that needs to be reset. Two most common locations are in the trunk on the sides, or on the passenger side kickplate under the glovebox on the right side of the inside passengers right foot.
SOURCE: Removal of water pump
wih great dexterity but its not insurmountable ,but its no job for a weekend mechanic
SOURCE: 99 Chrysler 300M gas gauge droping down to empty
you are going to have to replace the sending unit for the gas gauge, it is located in the fuel tank.
398 views
Usually answered in minutes!
×