Question about 2002 Nissan Sentra

1 Answer

How do i take the door panel off? the nissan sentra 2002 My door wont open from the inside.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The handle section of the door is snap-tite. remove it to find the fastening bolt(s) then unclip the rest of the door.

Posted on Jul 15, 2009

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
duane_wong
  • 6826 Answers

SOURCE: 1994 nissan sentra drivers door wont open from

Here's a trick I learned from a local body shop where I live.
Get a sawzall and cut the post that the latch hooks to.

This will open the door for you. Then repair whatever is required in the door, and replace the post on the inside of the body is cheaper than damaging anything else in the door.

Good luck on this repair.

Posted on Jul 21, 2010

vetteman3002
  • 2299 Answers

SOURCE: 2002 nissan altima se door wont open changed

There is a rod or cable that attaches to the door latch. I would think that this rod or cable has came unhooked out of the door latch. It will be in the back of the door, behind the door panel. Most likely this is the problem.

Posted on Jan 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Inside door handle stuck in open position


sounds to me like your cable came off the handle. you will need to removed roo panel to check it out.

Sep 17, 2012 | 2002 Nissan Sentra

1 Answer

Rear passenger door on a 2006 nissan sentra wont open from the inside or the outside


If power windows and the same window does not open the child safety switch is a very good possible reason.

Jun 14, 2012 | 2006 Nissan Sentra

2 Answers

Car door wont open from inside


You'll probably need the door panel from inside to expose the connections from inside. Observe to see any disconnected items like spring, bars, that is loose.

Dec 14, 2011 | 2006 Nissan Sentra

1 Answer

I can not open the driver's door from the inside on my 2006 Nissan sentra but it can be opened from the outside. Need help


BECOS YOU HAVE DIFFRENT ARM ROD FOR THE INSIDE AND THE OUT SIDE TAKE OFF THE PANEL AND YOU WILL SEE IT WHEN PULL THE INSIDE PANEL OFF ,PULL THE HANDLE AND YOU WILL SEE WHERE IT SUPPOSE TO BE AND JUST REPLACE IT

Mar 10, 2011 | 1994 Nissan Sentra 4-Door

1 Answer

1994 nissan sentra drivers door wont open from inside or out is it possible to pop door latch with screw driver or anything to get door open so i can remove the door panel and get a better look at things


Here's a trick I learned from a local body shop where I live.
Get a sawzall and cut the post that the latch hooks to.

This will open the door for you. Then repair whatever is required in the door, and replace the post on the inside of the body is cheaper than damaging anything else in the door.

Good luck on this repair.

Jul 02, 2010 | 1994 Nissan Sentra 4-Door

1 Answer

I replaced the passenger door with a used one and now it wont open and i cant take it off it is stuck howcan i fix it?


Remove door panel and activate lock assy from inside door. When installing, remove post and leave hinge bolts a little loose. Close door and make sure all gaps are even. Install striker post where old one was

Mar 11, 2010 | 1989 Nissan Sentra 4 Door

1 Answer

DRIVERS DOOR WILL NOT OPEN FROM THE INSIDE


you need to pull the door panel and see what became disconnected / wire rod linkages cause grief in the doors .and i've even seen some instances where the pieces lose plastic bushing parts and fall apart . as long as they make cars out of plastic / things will break in the cold and average wear and tear .

Dec 10, 2009 | 2002 Nissan Sentra

1 Answer

96Nissan Sentra Drivers side door/trunk locks broken


my 97 had the same problem. if the key fits the lock and will turn the lock but the lock wont open the door then your problem lies in the linkage between the door lock cylinder and the locking mechanism.

if the key fits the lock and the lock wont turn at all, this is what happened to me, then your lock is seized. Ive actually seen this on alot of 95-99 sentras it seems to be some sort of design flaw. what I had to do was to replace the lock cylinder and locate a new key. the locks from a dealer are a little pricy so i went around to salvage yards, every nissan sentra from said year range door locks were all seized, I even tried the 200sx as its the same car but a 2 door, same problem. luckily i found out that the 94 nissan altimas have the same door locks so I dismantled the inside door panel of said altima and snagged both front door lock cylinders. i also got lucky as the key was still in the ignition, replaced both locks and got a key for about 20 bucks. depending on your problem you might need new lock cylinders

Sep 22, 2009 | 1996 Nissan Sentra

1 Answer

Remove driver's side door panel on 2002 nissan altima


Removal instructions are available with images and step by step directions, www.carstereohelp.com/strnissan.htm

Nov 13, 2008 | 2002 Nissan Sentra

Not finding what you are looking for?
2002 Nissan Sentra Logo

448 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

81294 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...