Question about 1999 Ford Escort

2 Answers

Need diagram showing how to install belt belt came off need to know how it go on and how to ajust it

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

First jack up the right front tire side of your car and remove cover under your car motor, so you can see your pulleys from underneath your car, remove black cover where your timing chain belt is thats on the top center between alternator and powersteering pulleys, ok,looking at all your pulleys from your right side of your front end, starting from your top left is your alternator pulley,put belt on it and go underneath the motor mount to your right top powersteering pulley,then go down around the bottom right ac pulley,then to your left bottom crankshaft pulley,the back side of the belt thats on your top alternator pulley wraps around the soft edge pulley thats above your center waterpump pulley,then wrap around the idler pulley that's under your top alternator pulley,then wrap the backside of your remaining belt around the tensioner pulley that's in on your right, under your top ac pulley, use a 13 mm wrench to adjust by turning towards the back of your car so you can slide the belt on

alt ps

soft edge

idler wp tensioner


cs ac

Posted on Jul 18, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 103 Answers

SEND ME YOUR E-MAIL. I WILL SEND YOU DIAGRAM

Posted on Jul 12, 2009

  • andrew malaB ORBOR Jul 17, 2013

    diagram for bmw 740il 2010 model serpentime belt pls

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I install a fan belt


all vehicles are different and we do not know yours . DO WE

Aug 03, 2016 | Cars & Trucks

1 Answer

How do change a serpentine belt in my 1994 Grand Jeep Cherokee?


first if old belt is still on jeep draw a diagram of how belt is routed first even i get confused motor needs to be cool release tention on belt some have spring loaded tentioners some you have to losen the center bolt on tintioner pully and turn ajusting bolt to losen belt install new belt tention propley

Jan 21, 2013 | 1994 Jeep Grand Cherokee

1 Answer

Dodge d 50 Pickup


Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Feb 17, 2012 | Dodge Cars & Trucks

1 Answer

Need help I have a saab 93 convertable 2.0 i non turbo 1998 model drive belt has gone dont know where to find the ajuster to put the belt on. And a diagrame to see how it goes on.Regards James.


Here is a link to a Dayco PDF file that will have a belt diagram for you. Find you car on the main page, fine the number to the diagram and thats how you belt routes. Depends on month of manufacture yours could have 2 guide or tensioner pulleys. Facing the engine, one should be the top left pulley, that one is common to all. The optional tensioner will be the next pulley to the right. If one is missing it may have fallen off and you may be able to run a shorter belt.

Mar 02, 2011 | 2000 Saab 9-3 Viggen

1 Answer

Is there a picture available showing how to install the belt on the 1996 C3500?


There should be a belt routing diagram on your radiator core support cover. If it's unreadable or missing, I'll need to know what engine you have in the truck for the correct diagram.

Dec 10, 2009 | 1996 Chevrolet C3500

2 Answers

Diagram for serpentine belt


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1999/make/chevrolet/model/venture/1999_chevrolet_venture_drive_belt_routing_diagram.htm

Nov 17, 2009 | 1999 Chevrolet Venture

1 Answer

Diagram for surpentine belt installation 1999 grand prix


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

I do not know if you still need this information, but I am going ahead and answering it anyway.

CLICK
on the following LINK. It has the Belt Diagrams you will need.

The standard rule to removal the Serpentine Belt:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Rotate/Move the Tensioner away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.

3. Remove the loosened belt off one of the other more easily accessed Pulleys.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1999/make/pontiac/model/grand_prix/1999_pontiac_grand_prix_drive_belt_routing_diagram.htm

May 03, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Need diagram/schematic for serpentine belt replacement


Should be a tag on the core support somewhere that shows a diagram how to install your belt,usually its right on top where the radiator bolts to core support,open hood look down on top of support or its on the inside of hood open hood and look up see if theres a tag with a diagram of belt installation

Mar 22, 2009 | 1998 Dodge Ram

2 Answers

I attempted to replace all belts for my '92 Land Cruiser.


I DONT HAVE ONE BUT AJUST TO LET YOU KNOW A DEALER IS OBLIGATED TO LET AN OWNER OF THEIR CAR SEE A MANUAL OR DIAGRAM.

Jan 08, 2009 | 1992 Toyota Land Cruiser

1 Answer

Fan Belt wont fit on my saab 900


8011 this diagram should help.70129e8.jpg

Aug 24, 2008 | 1994 Saab 900

Not finding what you are looking for?
1999 Ford Escort Logo

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...