Timing belt diagram

Lois, Google search your year,make and model# fan belt diagram.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
fan belt diagram Google Search
Serpentine Belt Routing Diagrams
Serpentine Belt Routing and Timing Belt Diagrams

Diagrams here, this may help you. Belt diagrams are at bottom of page, after timing belt diagrams. http://www.2carpros.com/diagrams/chrysler/pt-cruiser/2001

I have a Toyota Town Ace diesel van, the timing belt broke and I need step by step help how to install new timing belt - timing marks diagram.

Here's a website with your diagram and instructions. The serpentine belt is also called a drive belt.
Go to 2carpros.com. Click on INFORMATION on the right side. Scroll down to serpentine and timing belt diagrams. Then enter your car's description. The serpentine belt diagram is below the timing belt information.
(Someday I'll have my son show me how to post up links. lol)

Installing timing belt is not very hard. Install the timing belt onto the pulleys, as follows, crankshaft pulley first, then the idler pulley, exhaust camshaft pulley, intake camshaft pulley, and the tensioner pulley. Just make sure the timing marks are set exact and not got moved from its actual position.------ If in-case,you missed the timing marks.Then you need to align it exactly,other wise there will be problem.------ For timing belt replacing and timing belt diagram,click the link below:--- http://carbeltrouting.blogspot.com/2011/10/2003-kia-spectra-timing-belt.html ------- This should help.Thanks.Helpmech.

Hope this helps you, you also might want to replace the water pump, due to it's timing belt driven.

Click on the following free direct Links.
This 1st Link has the Diagrams for Removal of the front of the engine components to reach the Timing Belt Covers: DEPENDING ON THE OPTIONS (AC/NO AC) ON YOUR 1.9L ENGINE (SOHC) - Some components do not need to be totally removed, but loosened and swung/kept out of the way inorder to gain full access to the Timing Belt Cover. NOTE: the Water Pump Pulley removal pictorial instructions.
http://www.2carpros.com/car_repair_information/year/1993/make/ford/model/escort/1993_ford_escort_drive_belt_routing_diagram.htm
This 2nd Link has Timing Belt Diagrams for your 1993 Ford Escort, including Diagrams for the Timing Belt Covers. Your Engine the 1.9L is the Single Overhead Cam.
http://www.2carpros.com/car_repair_information/year/1993/make/ford/model/escort/1993_ford_escort_timing_belt_diagram_marks.htm
AS FAR AS A STEP-BY-STEP:
This type forum to answer that question would literally take dozens of pages. I would strongly suggest you purchase a Haynes or Chilton Manual available at most auto parts stores. You will need the Torque Specifications for each and every Bolt and Nut involved.
Let me know if this helped.

You will find the timing gear alignment for belt installation in a Haynes or Chilton manual for that year that can be viewed or purchased at a discount parts store like Kragen,Checker,Autozone,Pep Boys,etc.

Check this diagram:



Fig. Timing belt routing-3.4L (VIN X) engine




Fig. Timing belt arrangement-3.4L (VIN X) engine



Fig. When installing the camshaft timing belt, work counterclockwise-3.4L (VIN X) engine

Good luck, and remember rated this help.

Crankshaft match marks


Align marks on timing belt pulley and pump body.

Camshaft pulley alignment marks

1. Align marks on camshaft pulleys with alignment marks on seal plate.
2. Install timing belt. NOTE: No looseness should exist on the tension side and at the camshaft pulleys.
   
3. Loosen tensioner lock bolt.
4. Turn crankshaft 2 revolutions in direction of rotation and check that timing marks are still in alignment.
5. Tighten timing belt tension lock bolt to 27-38 ft lb (32-52 Nm).
6. Apply a force of 22 lbs to timing belt between camshaft sprockets.
7. Belt deflection should measure 0.30-0.33 in (7.5-8.5 mm)
8. NOTE: Replace tensioner spring if timing belt deflection is excessive.

Timing Belt Installation

1. Install lower timing belt cover.
2. Install upper timing belt cover.
3. Install power steering drive belt and adjust belt tension.
4. Install fan pulley.
5. Install generator drive belt and adjust belt tension.
6. Install A/C drive belt and adjust belt tension.
7. Install splash guard.
8. Install fan and fan shroud.
9. Install 4 fan bolts. Tighten to 24 ft lb (33 Nm).
10. Install fan shroud mounting bolts.
11. Install fresh air duct.
12. Connect hose to resonance chamber.
13. Connect battery negative cable.