Question about 1998 Chevrolet Cavalier

1 Answer

I NEED TO REPLACE THE FRONT WHEEL BEARINGS ON MY 2004 CAVILER

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,982 Answers

Bearing is a hub assembly...not terribly difficult to remove but instructions are a bit too long to write here. You can find instructions in any haynes or chilton manual (about $20) and, manual will help you on many other jobs.Pretty much you remove the brake assembly and rotor, remove the axle center bolt and the three bolts that hold the hub on the steering knuckle. Hardest part is breaking the center bolt loose and getting the hub out of the knuckle. (they get rusted in)

Posted on Jul 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is it possible to replace a front wheel bearing at home on a 2004 Chevy Trailblazer?


You would be better off replacing the entire hub assembly. Yes, bearings need to be pressed into place and this requires a hydraulic press.

Dec 19, 2012 | 2004 Chevrolet TrailBlazer

3 Answers

Can I replace the front bearings myself or do I have to buy the whole hub.


Hello, the front wheel bearings are not a servicable part. you have to replace the front hub bearing assemblies. here is a picture.



mrtechwrench_14.gif

Dec 05, 2010 | 2004 GMC Envoy

1 Answer

Repair front wheel bearing assembly


no special tools in particular just the usual or necessary tools required.. 1stly u remove the Tyre and the caliper then u'll see something like a long rod dats the bearing

Aug 02, 2010 | 2004 Mercury Mountaineer

1 Answer

Replacing front wheel bearings on a 2004 Suburban


The front wheel bearings are sealed units, and must be replaced with the entire hub assembly. They do not need periodic cleaning/replacing as they did in the old days, if they are not making noise do not bother with them.

Apr 07, 2010 | 2003 Chevrolet Suburban 1500

2 Answers

Repalce cv joints


you need to jack the front end up and see if the wheels will move like the front wheel bearings are gone i bet you that will have to replace them your mustang is rear wheel drive there for you should not have cv joints in the front bushings and bearings

Jun 27, 2009 | 2004 Ford Mustang

1 Answer

How do you replace the front wheel bearings on a 2004 Ford Escape


you must take both wheels off remove lower control arm, remove hub via wheel nut and the bearings must be pressed in at a shop or machine shop

Apr 20, 2009 | 2004 Ford Escape

2 Answers

My 04 ford explorer is making a loud humming noise when driving. The noise is coming from front and gets louder the faster you drive.


Try to rotate the tires to rule that out.If not then it sounds like the wheel bearing is going out, on some cars you can replace the bearings on others youi have to replace the hub assembly

Mar 25, 2009 | 2004 Ford Explorer

1 Answer

Wheel bearings


u will need access to a hydraulic press to remove the bearings and re-install them in the hub, other than that no.

Mar 24, 2009 | 2004 Land Rover FreeLander

1 Answer

Chey aveo front hub bearing what is this?


yes front wheen drives have hub bearings. Most of them need the hubs to be pressed apart to replace them. the hub bearing supports the end of the CV drive shaft closest to the wheel. hope that helps.

Mar 17, 2009 | 2004 Chevrolet Aveo

Not finding what you are looking for?
1998 Chevrolet Cavalier Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

81342 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...