Question about 2004 Toyota Sienna

2 Answers

How do you replace wheel bearings on 2004 Toyota Sienna LE? Makes an awful loud creaking/squeaking noise on the front when you turn hard right.

Posted by on

  • Anonymous Mar 15, 2014

    how do I replace the radiator

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 8 Answers

The wheel bearings will need to be pressed out / in to the steering knuckle.. by an automotive /machine shop... Before that.. try to check if it is in fact the intermediate drive axel bearing.. located up near the lower rear motor mount.. that caused loud thunder like noise in my '06 CE.. sounded like a helicopter when turning, which stresses that bearing. and was lesser while going straight, but very annoying, as it increased with speed from 10 to @ 55 mph. I replaced my right side (entire) drive axel.. $100.00 for the unit at Advance discount auto parts, had new bearing, cv boot and all, pre installed. easy to do with basic automotive repair skills.

Posted on Jul 29, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 54 Answers

Dont mes with that, Please take to agent to replace. Its your life if you didnt do it wright.

Posted on Jul 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought a ford ba wagon and when you do a hard turn like driving in your driveway or turning in a street it makes a loud creaking noise coming for the front


check the strut or top strut bearing for failure
the creaking noise can be from the spring being wound up from turning as the bearing has seized
have it inspected by a specialist suspension shop

Nov 16, 2015 | Ford Cars & Trucks

2 Answers

Creaking noise from front left when turning


check the wheel bearings and adjustment. check cv joints.

Mar 26, 2014 | 2006 Ford Mustang

1 Answer

Squeaking from driver side front tire


Tie rod ends, ball joint, or Upper strut bearing. An alignment shop would give you an estimate for the repair. You can borrow tools to install the bigger stuff at most Autoparts stores. But for all of these repairs you should get an alignment after replacing any one of these parts.

Nov 18, 2011 | 2004 Ford Taurus

2 Answers

I have a 2004 corolla that has a humming noise in the front when turning to the right.replaced the right front wheel bearing and noise still there.any ideas?


It's most likely the left wheel bearing that's causing the noise, when turning to the right the weight of the car shifts to the left placing more load on the left wheel bearing and takes load off the right bearing.

Aug 23, 2011 | 2004 Toyota Corolla

1 Answer

Left front weel makes loud noise, I did replace brak pads but look that something else is not working right, may it be bearing?


Wheel bearing noise can be identified as a growl type noise at highway speeds. Turn slightly left and right and note if the tone changes, this would indicate a failing bearing.

Feb 26, 2010 | 2004 Ford Ranger

1 Answer

1997 Buick LeSabre has squeak noise coming from right front.


More likely this is a wheel bearing or CV joint than suspension components.

One good indication is if, when your making a right turn or accelerating, there is a shudder or shaking in the steering wheel then its likely a wheel bearing.

Another good indicator can be found when you jack up the suspicious wheel. Put one hand on the top of the wheel and one on the bottom and pull back and forth. If the wheel makes a clunking noise and moves in either direction, then wheel bearing is shot.

Aug 13, 2009 | 1997 Buick LeSabre

2 Answers

My 2004 saturn vue redline makes a roarong noise


we have a 2003 saturn vue which we installed new tires on and we noticed a noise about 6 months afterwards. it sounded to my wife and i to be loud road noise from the tires. the car was driven for 6 months and we decided the noise was annoing. had the tires checked only to find it was the left front wheel bearing which was replaced and stopped the noise.

Jul 11, 2009 | 2003 Saturn VUE

3 Answers

Rotating wheel noise from front end


That is the bearings going bad on it.

May 24, 2009 | 2004 Toyota Sienna

3 Answers

Creaking noise in front end 1997 explorer


Sounds like it is your CV axles.  Turn the wheel one direction, right or left, and check just behind the wheels to see if your CV boot is cracked or ripped (the boot is a black, rubber accordion looking thing).  If it is cracked or ripped, I would say that is definitely the problem.

May 17, 2009 | 1997 Ford Explorer AWD

Not finding what you are looking for?
2004 Toyota Sienna Logo

2,226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

81294 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...