Question about 2001 Mercedes-Benz C-Class

1 Answer

Reduce oil after changeing oil this problem appear on display. what can i do? pls

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 117 Answers

Reduce oil would indicate that probably too much oil was added into the engine. park vehicle on level ground and check the engine oil level. it shouldn't be past the full mark on the dipstick..if there is too much in there, you will have to drain some...two way, siphon out of oil dipstick tube (hard but not impossible) or open the oil drain plug at the bottom and drain some of the oil..

good luck.. if still have problems, post it up
cheers bry

Posted on Jul 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, pls my nissan primera smokes a lot and i hate the pollution and noise. what can i do pls?


unless you have money to carry pout repairs , you have to put up with the problem
change to a heavier grade oil 40w-60 or an oil specific for worn engines

Jul 15, 2016 | 1999 Nissan Primera

Tip

Cadillac service light 1989-01


Eldorado

2000-01

Turn the ignition to ON. Press the TRIP button on the driver information center (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the percentage of oil life remaining. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the percentage of oil life remaining as 99 percent. The engine oil life monitor is now reset. Turn the ignition OFF.


DeVille,
Eldorado


1999

To reset the service Oil Life Indicator, display the
"OIL LIFE LEFT" message by pressing the "INFORMATION SKIP" (skip info) button. Press and hold the "RESET NO" (no info reset) button until "100% OIL LIFE" is displayed.


Deville,
Seville


2000-01

Turn the ignition to ON, Press the INFO button on the driver information center (DIC) to display ENGINE OIL LIFE. Press and hold the INFO RESET button on the DIC until the display reads 100% ENGINE OIL LIFE. The engine oil life index is now reset. Turn the ignition OFF.


Deville,
Seville,
Eldorado


1997-98

Display "ENGINE OIL LIFE" by pressing the "INFO" button. Press and hold the "INFO RESET" button until the message shows 100.


All Models
except
Fleetwood


1994-97

Press the "INFORMATION" button until "OIL LIFE LEFT" is displayed. Press the "RESET" button until "100" or "0.0 OIL LIFE LEFT" is displayed.


Fleetwood


1994-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds.


All Models,
Seville,
Eldorado


1993,
1994-95,
1994-95

The automatic transaxle message can be reset through the following procedure. If "CHANGE TRANSAXLE FLUID" appears on the Information Center, press and hold the "OFF" and "REAR DEFROST" buttons until "TRANS FLUID RESET" appears.


DeVille,
Fleetwood


1991-93

When "CHANGE OIL SOON" light is illuminated, press and hold the "RESET" and "RANGE" buttons on the Fuel Data Center for 5 to 60 seconds. When the buttons are released, the light will flash four times if it has been reset. If the light comes back on for more than 5 seconds, repeat the procedure.


Allante


1989-93

When "CHANGE OIL SOON" appears on the Driver Information Center, press the "RANGE" button until "OIL LIFE INDEX" shows on display. Then press and hold "AVG SPEED" and "RESET" (or "RANGE" on late models) buttons until display shows "100".


Seville,
Eldorado


1992-93

Press "INFORMATION" button on the Driver Information Center until "OIL LIFE INDEX" is displayed. Press "STORE/RECALL" until "OIL LIFE INDEX" resets to 100.


Seville,
Eldorado


1989-91

When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center, press "ENG-DATA" button until the "OIL LIFE INDEX" appears. Then press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).





















on Dec 07, 2009 | Cadillac Eldorado Cars & Trucks

2 Answers

Reduced power light


I suggest you tell us what this mystery vehicle is so we can try to help. But from what you described i would start by checking fuel pressure at the fuel rail. And changing the fuel filter.

Aug 04, 2017 | 2000 Saturn Ls 4dr Sedan

1 Answer

Caterpillar 330cl c-9 engine ecm reading low oil prressure and the manual guage shows the correct pressure


change the oil pressure sending unit on the eng. if this goes bad it sends the wrong voltage to the computer which will then detune the engine to reduce the chance of damage due to low oil pressure . Good Luck

Feb 25, 2014 | 2002 Oldsmobile Bravada

2 Answers

I have a 2003 lincoln Aviator I recently just change my oil and put in Synthetic oli well on on the gauge a message came up saying "oil change is required' can someone solve this problem for me


1.press the setup control to enter system check then press setup control to display "oil life =***% hold reset = new.

2.press and hold the reset control for 2 seconds and release. "oil life is set to 100%" is displayed,

3.If lower oil life is desired, press and release the reset control to reduce the value.

Aug 28, 2011 | 2003 Lincoln Aviator

3 Answers

How to reset the change oil light for a 2007 lincoln town car. Hitting reset button doesn't do it.


FIRST press and release the setup button to display oil life= xxx
then press and hold the reset button for about 2 sec it should then display oil life set to 100%
--------------------------------
Just pressing the reset button when the change oil light comes on while driving will not reset the computer

Feb 15, 2010 | 2007 Lincoln Town Car Signature Limited...

1 Answer

When i changed oil i forgot to follow the corect proceedures,so now i reading in dashboard of my car . change oil soon . later i follow the proceedures in cataluge , but same sentence appear pls. advise


this light is triggered only by miles. you will probably need to go to the dealer to reset this light. in the meantime try this: 1. Turn the key to the "ACC" position which is the notch that allows power but doesn't turn the engine.
2. The display will read change engine oil soon - hit the display button(i) and the display will read 0% oil life.
3. Hit reset button (the check mark button) for 5 seconds and the display will change to 100 % oil life.
4. It may not work the 1st,2nd,3rd .... attempt , but will work eventually.

Nov 09, 2009 | 2007 Suzuki XL-7

1 Answer

Who do you reset change oil soon light on a 2009 f350


To reset the oil monitoring system to 100% after each oil change
(approximately 7,500 miles [12,000 km] or six months) perform the
following:
1. Press and release the
SELECT/RESET button to display
“OIL LIFE XXX% HOLD RESET =
NEW”.
2. Press and hold the
SELECT/RESET button for two
seconds and release. Oil life is set to
100% and “OIL LIFE SET TO 100%”
is displayed.
Note: To change oil life 100% miles value from 7,500 miles (12,000 km)
or six months to another value, proceed to Step 3.
3. Once “OIL LIFE SET TO XXX%” is displayed, release and press the
SELECT/RESET button to change the oil life start value. Each release
and press will reduce the value by 10%.

Sep 30, 2009 | 2008 Ford F-350

1 Answer

I had my 2003 BMW M3 in for it's annual oil change and they didn't reset my oil change maintanence light. It is still showing 3700 miles before next oil change and I just got it done.


1. Key in 0 or off position.

2. Press and hold odometer button and turn key to 1 or acc. position... like you're turning the car on, but don't crank the engine.

3. Keep button pressed until any of the following words appear in display: "oil service" or "inspection", with "reset" or "re". For vehicles with "high cluster", the fuel amount (in litres) remaining until next service is displayed (i.e. 3224).

4. Press and hold button again until "reset" or "re" flash.

5. While display is flashing, press button briefly to reset service interval indicator. After display has shown new interval, the following will appear in display for approx. 2 seconds:"END SIA"

Apr 14, 2009 | 2003 BMW M3

1 Answer

Oil service reset


When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center;
  1. Press "ENG-DATA" button until the "OIL LIFE INDEX" appears.
  2. Press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).

This is what I found on your car bud. I hope that's what you're looking for. :)

Sep 21, 2008 | 1989 Cadillac Eldorado

Not finding what you are looking for?
2001 Mercedes-Benz C-Class Logo

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Marvin
Marvin

Level 3 Expert

81400 Answers

Joseph Prosser

Level 3 Expert

772 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...