Question about 2002 Oldsmobile Alero

1 Answer

Hi, my passenger side window dropped down and i can't remove the panel to fix it. Can you tell me how to remove the inside door panel please.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 66 Answers

Under the door handle there's an oval-shaped cover. Remove it and unscrew the two screws hidden under it/
Remove the red light lens on the corner and unscrew the screw hiding there.
Slowly but firmly, pull on the far side corner - where you removed the red lens. It should pop out. Following the line of the under side of the panel - pop out the panel as you go.
Lift up ane there you go - here's the window!!!

Good luck!

Posted on Jul 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Remove interior door panel 2002 Chevy tracker


No you don't need any special tool . Find all screws on out side of door trim panel and the window handle , the mirror cover plate , then just pull on edge of the panel .
Gently pry the front side door trim panel (3) from the front side door by disengaging the plastic retainers which secure the panel.
Position the door trim panel (3) away from the door in order to gain access to the front side window switch electrical connector, if equipped.
Disconnect the window switch electrical connector, if equipped.
Remove the door trim panel (3) from the vehicle.
Remove the front side window switch from the door trim panel (3) by releasing the 4 plastic retaining tabs, as needed.

Use a cloth in order to pull off the snap ring which secures the front side door window regulator handle (1), if equipped.
Remove the window regulator handle (1), if equipped.
Remove the front side master window switch, if equipped. Refer to Power Accessory Switch Panel Replacement .

Remove the front side door inside handle (1). Refer to Front Side Door Inside Handle Replacement .
Remove the outside rearview mirror opening cover (2).
Remove the screw which secures the front side door pull handle (4).

Front Side Door Inside Handle Replacement
Removal Procedure
Remove the screw which secures the front side door inside handle (1).
Slide the inside handle (1) forward in order to release the retaining tabs which secure the handle to the door.
Open the front side door inside handle rod retainer and remove the front side door inside handle rod from the inside handle (1).
Remove the inside handle (1) from the vehicle.

Check out youtube video showing how to do it !
How To Remove Install Front Door Panel Suzuki XL 7

Jun 10, 2017 | Cars & Trucks

2 Answers

Passenger side window in 2004 Honda Odyssey: The cable is no longer connected to the rail. Where does the cable reattach to the rail? It's hard to see inside the frame of the door.


This tells me the regulator is broken,the cable may have poped or a plastic wheel guide broke, you will need to replace the regulator, heres a picture to help explain what i'm talking about,fb9a2c2.jpg

Jun 21, 2010 | 2004 Honda Odyssey

1 Answer

The passenger side window on my 98 vw beetle went down and will not go up and the motor still runs but the window goes nowhere. i got the plastic inside door panel off but can not get the metal inner panel...


Hi:
You need to fix the window thru the small openings in the door. Most likely , you have had a plastic roller or guide part break, so your window assembly is not attached to the motor.
One option is to remove the door panel on the good side to use as an example to what you are missing.
or you can get a subscription to www.alldatadiy.com for about $20, and they will give you all the info you need to do the job!

Dec 01, 2009 | 1998 Volkswagen Beetle

1 Answer

How to repair Power Window Switch on front Driver's side. Window will go down, but not up. Plus now, front window on passenger side sometimes doesn't respond.


The reason that they go down but not up is because they are usually binding in the track inside the door. You can remove the door panel and grease it with silicone grease to fix the problem. Usually its not the switch, but if you press it too much the switch will get burned out because it overheats inside from the current. If you remove the door panels, you should be able to switch the left and right switches to trouble shoot the switches. If you switch them and the right one goes down now, then you know the old right switch is bad.

Sep 12, 2009 | 1999 Nissan Altima

1 Answer

Passenger side view mirror broke and trimming around window


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door.

As for the trim, you should just be able to wedge it back in place into the door

Jul 30, 2009 | 2003 Toyota Corolla

1 Answer

2002 Cougar passenger side window switch - remove & replace


remove the door panel switch comes off from inside

Jul 23, 2009 | 2002 Mercury Cougar

1 Answer

Window on passenger side will not come down need door panel instructions.


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

May 31, 2009 | 2002 Lincoln Continental

1 Answer

Need to know how to remove door panel to fix window problem


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

May 20, 2009 | 1996 Volkswagen Cabrio

Not finding what you are looking for?
2002 Oldsmobile Alero Logo

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Marvin
Marvin

Level 3 Expert

81423 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...