At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
HI I AM LOOKING FOR CYLINDER HEAD TORQUE SETTINGS + VALVE CLEARANCES AS WELL AS TORQUES FOR TURBO.THIS IS A WE 3.0L ENGINE.this is a WE ENGINE TDCI XLT MODEL 2010
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi valve clearance inlet 0.010 in (0.254 mm). Exhaust 0.017 in (0.432 mm) normal running temperature .. Cylinder head bolts Torque 65 - 70 lb/ft.,.. Cheers
Hi David:
May I suggest that you Google search the make and model of the engine.with the key words
Cylinder head torque settings and valve clearance
Odds are you'll find the answer.
Cheers
con rod bolt tension is 55-60ft/lbs
crank shaft main bearings is 80-85 ft/lbs
fly wheel bolts95-100 ft/lbs
crank shaft pulley nut 94-123 ft/lb
head studs tension 80-95 ft/lbs working in a spiral direction from no 1 stud directly in the centre of the head. Pull down in 10ft/lb increment starting at 20 ft/lbs
valve clearance is .010" both valves cold but after warming engine and re-tensioning the head studs re set valves to .012 both valves
injector retaining nuts tension12-17 ft/lbs
I have just rebuilt one for our Westerly 21. This is from my Petter 'A' range workshop manual:- The water cooled engines (AC1W etc.) are:cylinder head nuts: 30NM (22 lbft) except 32.5NM (24 lbft) for the one that also holds the rocker. Valve clearances are 0.1mm (0.004") COLDReset valve clearance after one hours running since torquing the head. Retorque head and set valve clearance after initial 20 hours running I believe Mini-6 refers to the water cooled engines but just in case, the air cooled engines are 27N (20 lbft)
×