Question about 2005 Chrysler 300

2 Answers

I need to know how to install the serpentine belt on a chrysler 300 2005

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,498 Answers

Here's how to get a serpentine belt on or off (You'll need to do both). It's easy and doesn't require a prybar.


On:

  • Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
  • Get the belt around all the pulleys except the A/C compressor or Alternator.
  • Locate the tensioner pulley. It's one of the smaller ones and is mounted on a spring loaded arm. It's job, as the name suggests, is to keep the belt tight. Get your socket on the center nut of this pulley.
  • Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  • Slowly release the tension.
  • You're done
Off:
  • Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
  • Locate the tensioner pulley. It's one of the smaller ones and is mounted on a spring loaded arm. It's job, as the name suggests, is to keep the belt tight. Get your socket on the center nut of this pulley.
  • Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt off one of the pulley's (A/C or Alternator is best)
  • Slowly release the tension.
  • You're done

Mike

Posted on Aug 01, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 363 Answers

The diagram of the routing is under the hood on the cowling

Posted on Jul 30, 2009

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 538 Answers

SOURCE: 2007 chrysler sebring serpentine belt diagram

Go to; daycoproducts.com, click cars and trucks, then go to serpentine belt. Then on the right side of the screen click on finding your vehicle. Then get the illistration number and click on illistrations, go to that number it should something 6-? or 7-?. It's a pretty good websight.

Posted on Jan 31, 2010

  • 47 Answers

SOURCE: 2006 Chrysler Pacifica serpentine belt routing

here are a couple diagrams...
1e7d361.jpg

011a835.jpg

If you need anything else, let me know.

Posted on Mar 19, 2010

  • 1024 Answers

SOURCE: serpentine belt routing for 2004 chrysler pacifica

here it is

98c85ed.gif

Posted on Apr 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belt routing for 2001 Sebring 2.4 engine


Jeff, Check the attached links for your 2.4 belt routing,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Repair Guides Engine Mechanical Components Accessory Drive Belts 2...
How to Change Serpentine Belt on 2002 Chrysler Sebring
http://www.serpentinebeltdiagram.com/serpentine-belt-diagram-2001-chrysler-sebring-4-cylinder-24-liter-engine-alternator-and-air-conditioner-with-dohc-engine-02236

Jul 31, 2016 | Cars & Trucks

1 Answer

After serpentine belt was replace the car wont start what could be the problem 2005 chrysler pacifica


Only thing that would cause your vehicle to not start after replacing a serpentine belt, is maybe a wire was knocked off during installation. Your car will run, even without the serpentine belt on it (don't do it, it will cause it to overheat very fast and may cause damage). So just check around, odds are its something simple

Nov 11, 2013 | 2004 Chrysler Crossfire

2 Answers

I am installing a timing belt on a 2004 chrysler pacifica and i need help!


Click on the following: free, direct Link. It has several Diagrams including the Serpentine Belt Diagram for your 2004 Chysler Pacifica 3.5L DOHC V6. It has the Instructional and Directional Diagrams that will help you.

http://www.2carpros.com/car_repair_information/year/2004/make/chrysler/model/pacifica/2004_chrysler_pacifica_drive_belt_routing_diagram.htm

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench (See Diagram in Link: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.
Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Apr 03, 2010 | 2004 Chrysler Pacifica

1 Answer

Ho is the power steering belt on 2002 chrysler


Click on the following direct Link. It has the Belt Diagrams you will need, complete with Removal Diagrams and Directions. It also has numerous other helpful diagrams for use.

Standard Rules to Removal the Serpentine Belt with a Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

http://www.2carpros.com/car_repair_information/year/2002/make/chrysler/model/sebring/2002_chrysler_sebring_drive_belt_routing_diagram.htm

Mar 25, 2010 | 2002 Chrysler Sebring

1 Answer

2006 Chrysler Pacifica serpentine belt routing


here are a couple diagrams...
1e7d361.jpg

011a835.jpg

If you need anything else, let me know.

Mar 15, 2010 | 2006 Chrysler Pacifica

1 Answer

2007 chrysler sebring serpentine belt diagram


Go to; daycoproducts.com, click cars and trucks, then go to serpentine belt. Then on the right side of the screen click on finding your vehicle. Then get the illistration number and click on illistrations, go to that number it should something 6-? or 7-?. It's a pretty good websight.

Jan 31, 2010 | 2007 Chrysler Sebring Sedan

2 Answers

Where can i find a diagram to install serpentine


Most parts stores can print this out for you for free.

Sep 10, 2009 | 1991 Chrysler LeBaron

1 Answer

How to put on Serpentine belt for 92 Chrysler Lebaron 3.o liter engine


Before replacing or installing the old belt you need to check all of the pulley's that the belt rides on for play. Pay special attention to the spring loaded tensioner pulley. They can sieze and cause the belt to come off.

I found this picture it is a bit large for the screen.

80003475.gif

Aug 29, 2008 | 1995 Chrysler LeBaron

Not finding what you are looking for?
2005 Chrysler 300 Logo

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...