Question about 2004 Chevrolet Colorado

3 Answers

Abs light is on

Changed front rotors & pads abs light is on 2004 colorado display says abs fault

Posted by on

  • waleyes1 Jul 12, 2009

    i did that before still comes on thanks away.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

2 things, if you BREAK wire on the abs while removing the rotors /hub, that will do it.

if you dont get the ABS sensor in right spot and right distance from hub, you will get abs fault.

its one or both of those, mostly i see broken wire,did you disconnect wire to abs before you removed the hub?

Posted on Sep 27, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My truck is doing something similar, the abs light came on a few times while driving down the highway displaying fault and traction as well. After awhile I can now feel the abs malfunction and then I hear a ding and it displays the abs fault and traction. I took it in and they said the only thing on the computer was a speed sensor problem. I am going to replace this soon and I will let you know the outcome. Is this the problem you are having as well?

Posted on Aug 10, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

Try removing the pos. battery cable for 10 seconds then replace it, if you lost fluid fill it up to full line ,or to top, hope to help you, robert b.

Posted on Jul 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset the ABS light on 2006 Chevy Colorado?


Disconnect the battery for 10 min. , but if the light comes back on there is a hard fault associated with a DTC - diagnostic trouble code ,which will need to be checked .

Oct 24, 2015 | Cars & Trucks

1 Answer

How to reset abs and traction lights on 2004 colorado


there is no resetting of the ABS light. it means there is a problem somewhere in the ABS system. There are sensors by each wheel - they seem to be sensitive to moisture - they may have failed for the ABS sensors. the traction control light may be related to the ABS light. just check it out ! make sure there are no brake fluid leaks at the wheels, and be sure master cylinder is full of brake fluid. In most cases a scan tool is necessary to access the stored fault codes. good-day !

Nov 13, 2011 | Cars & Trucks

1 Answer

Changed my front brakes and rotors..ABS light came


did you knock off a wire on the sensor ,or even break the sensor unit when you changed the rotors..

Jul 11, 2010 | 2006 Chevrolet Colorado

1 Answer

Abs/AWD light on 04 venture


Have you checked the brake fluid level?

Jun 06, 2010 | 2004 Chevrolet Venture Passanger

1 Answer

How do turn abs light off,changed front


You don't. Check all the wheel speed sensors & make sure they aren't damaged. If not, check the codes & diagnose from there.

Jul 13, 2009 | 1997 Dodge Caravan

3 Answers

How do you get the front rotors off of a 2004 Chevy Colorado? More specifically, do you take off the hub assembly, and if so, how?


If this is a 4wd the rotors are "captured" and machined on the truck using an on car lathe. Otherwise you should get a printout of all the steps from a dealer.

Jun 16, 2009 | 2004 Chevrolet Colorado

1 Answer

Abs fault


check and make sure u did not damage or disconnect the wheel sensor(s), that would be just about the only thing u could have done to cause this issue, u might want to have the system tested for trouble codes to confirm this wheel sensor possiable fault.

Mar 10, 2009 | 2004 Chevrolet Colorado

1 Answer

Abs fault


I bet the sensor has been bumped out of place or the connection was disturbed. No question the first things to check

Good Luck

Feb 08, 2009 | 2004 Chevrolet Colorado

1 Answer

Abs light


This is a (4) four wheel sensor system and more than likely one of them has failed. This will cause ABS module to turn on warning lamp and make the brake pedal 'act up' under the right conditions.This 'acting up' is the ABS system getting a false signal that a wheel is not turning the same as the others when it actually is. Have it scanned for codes and a streaming data scan on a road test under the same conditions that you are experiencing the 'act up' to pinpoint the fault. Hope this helps! Please rate me.

Jan 31, 2009 | 2004 Chevrolet Colorado

Not finding what you are looking for?
2004 Chevrolet Colorado Logo

740 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...