Question about Chrysler 300

1 Answer

I changed out the stock stereo in my 2007 chrysler 300 base car. Now the a/c cluster does not work. Any ideas? All fuses are good, stereo works fine. I don't see any broken wires. Now there was two connectors going to the stock radio and I just needed one. I can't beleive that a/c control goes through the radio connector. Also I have the airbag inop caution lit on the dash while I am driving. Is there a firewall disconnect somewhere that I may have pulled loose that is common to both problems? Everything was fine before I changed out the stereo.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need a diagram for radio wiring for 2006 chrysler 300 touring

Posted on Aug 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2007 Eddie Bauer Explorer how do I fix the message center that keep flashing circle slowly then it flashes calibrate complete.


Do you have base instrument cluster) or high series instrument cluster) ?
Symptom Chart Condition Possible Sources Action
  • The message center is not operating correctly (base instrument cluster)
  • Instrument cluster
  • OBSERVE the operation of the message center when pressing the TRIP/SELECT button. Does the message center display change when the TRIP/SELECT button is pressed?
    • If the message center display changes, the system is operating normally at this time.
    • If the message center display does not change, INSTALL a new instrument cluster. REFER to Section 413-01 . TEST the system for normal operation.
  • The message center is not operating correctly (high series instrument cluster)
  • Message center switch
  • Instrument cluster
  • Go To Pinpoint Test A .

Jan 24, 2015 | 2007 Ford Explorer Eddie Bauer

1 Answer

1998 plymouth grand voyager cluster illumination


I would check the dash lights fuse first. If the fuse is good and the circuit has voltage, you may have toasted the dimmer control.

Aug 13, 2012 | 1998 Plymouth Grand Voyager

1 Answer

2007 Chrysler 300 dash speakers and front right speaker aren't working


there is an amp usually built into the factory head unit or mounted in the dash behind the head unit. I would try running a new wire straight from the back of the stereo to the speaker and see if it works. if it does then you have a broken wire and need to run new ones

Jul 14, 2012 | 2007 Chrysler 300

2 Answers

Cant take my car out of park, 2007 ~ 300 chry


there should be a shift lock overide button on the shifter look in owners manuel. just push button in and shift
make sure brake lights work most cars wont shift out of park unless brake is on. they use the brake light switch for this though some have a seperate switch on the brake pedal
check ALL fuses under dash and under hood replace any that are bad

Mar 25, 2010 | 2007 Chrysler 300 AWD Sedan

2 Answers

Where is the fuse for the speedometer on a 06 Chrysler 300? Yesterday my speedometer stopped working on the drive home. Before I take it to a shop I want to check to see if it may be fuse related. Can...


I was unable to find anything on the fuse for just the speedometer, with the other gauges in the cluster working correctly. Below are instructions on how to test your instrument cluster. This will confirm whether or not the problem is within the cluster itself or somewhere else. I hope this will get you started on your problem or hopefully solved.

1d93a2c.jpg
c4abca9.jpg
0c22e2e.jpg

Mar 13, 2010 | 2006 Chrysler 300

1 Answer

The heated seats for the front driver and passenger don't work


yes maybe a fuse, also look under the seat and ensure the wire is connected they sometimes get caught when moving the seat back and forward and split against the metal seat base.

Jan 16, 2010 | 2007 Chrysler 300c AWD Sedan New Cars

1 Answer

Rear window defrost dont work i change de fuse but fuse was still good do you a idea my car is a chrysler 300c 2005


loose or bad connection on rear screen connector or open circuit due to scratched or broken screen heater...

Oct 27, 2009 | 2007 Chrysler 300c AWD Sedan New Cars

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

81423 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...