Fixing a leak - bmw 525i windshield washer tank
Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Good luck!
Posted on Jan 02, 2017
SOURCE: diagram for serpentine belt for 2002 BMW 525i
An image of a serpentine belt, hope this will help you,
Eitan.
Posted on Jun 10, 2008
SOURCE: windshield washer reservoir tank is leaking how do I replace?
You must remove from it's mount and empty out any fluids that is in tank.fill the tank with water and locate where the leak is coming from. wash tank a few times and the let dry upside down. Get some sand paper (80 grit course) and sand area where leak is, clean area with a vacume or clean rag.you can buy a 2 stage epoxy that comes in an injection form and squeeze it out on a pc of paper and then get a q-tip and mix the 2 components together, fill the crack or hole generously with the q-tip, if you have to,let dry for 24 hours and mix more and put more on. let dry another 24 hours, replace tank back in it's place and you've solved your leak. (epoxy does wonders if its used properly.
Frankthetank
Posted on Nov 23, 2008
SOURCE: How to set-up handsfree system on 2002 bmw 525i?
turn on bluetooth to your vehicle...open your phone to bluetooth you should see a menue that says pair devece or look for devices to pair with click on that and let it searchh that should fix the prob...
Posted on Feb 03, 2009
SOURCE: Replacing 2002 BMW 525i Blower Motor fuse? Where
this should be on the rear. it is fuse number 76 with a 40A rating.
Posted on Jun 29, 2009
SOURCE: oil change reset for bmw 525i
You only need to hold the left odometer reset button while turning the key to position 1 (Accessory). Keep holding the button for 5 or so seconds until any of the following shows in the display: OIL SERVICE or INSPECTION with RESET or RE. Release the button and press it again for another 5 or so seconds until RESET or RE flash. While the display flashes, press the button one more time briefly. If done correctly, END SIA should show up for a few seconds. All done.
Thank you for using fixya
Posted on Jun 07, 2010
May 07, 2014 | 1990 BMW 525i
Oct 25, 2012 | 2006 BMW 3 Series
Jan 31, 2011 | BMW 525 Cars & Trucks
Mar 29, 2010 | 2002 BMW 5 Series
Feb 24, 2010 | BMW 525 Cars & Trucks
Jun 24, 2009 | 2000 BMW 3 Series
Apr 04, 2009 | 2007 BMW 525xi Sedan
Jan 17, 2009 | 2002 Pontiac Grand Prix
Dec 20, 2008 | 2002 BMW 5 Series
Jun 10, 2008 | 2007 BMW 525xi Sedan
182 people viewed this question
Usually answered in minutes!
×