Question about 1995 Mercury Villager
1.- Carefully unplug the wires connected to the bulb located inside the headlamp, be sure to glently press the far side of the plug (where the wires come out) there's a rectangular shaped lock and pull the plug.
2.- Carefully turn the donut ring that holds the bulb in its position by turning it about 1/4 turn counter clockwise and pull it out.
3.- Pull the bulb out gently (never touch the glass) just the plastic base.
4.- Place the new bulb inside and be sure it is in the same position as the old one.
5.- repeat step 2 and 1 backwards.
There should be no problem
Posted on Jul 23, 2009
Rotate the plastic ring 1/4 turn. Pull connector off by pressing the release tab & pulling. Pull bulb out straight.
Posted on Jul 23, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Apr 10, 2014 | Cars & Trucks
Aug 12, 2011 | 2001 Mercury Villager
Jun 10, 2011 | 2001 Mercury Villager
Mar 08, 2011 | 1995 Oldsmobile Aurora
Jan 04, 2010 | 1999 Mercury Villager
Jul 13, 2009 | 1995 Mercury Villager
Apr 04, 2009 | 2001 Mercury Villager
Mar 20, 2009 | 1995 Pontiac Grand Am
Jul 01, 2008 | 1995 Mercury Villager
148 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: