Question about 1994 Chevrolet C1500

2 Answers

91 chevy k 1500 won't shift into reverse. i think its a 700r4 transmission but im not sure. it also takes a high rpm to shift out of 1st. Thanks

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,124 Answers

Could be a vacuum issue or the modulator..

The modulator tells it when to shift and is controlled by vacuum presure..
Check all vacuum lines that rum from the tranie for cracks, spits etc..

it could also be a sensor..

Hope this helps !!
Please rate me good ;o)

Posted on Jul 11, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 158 Answers

Check the throttle valve cable adjustment. maybe set too tight if shift out of 1st is delayed. best is to have it diagnosed and adjusted by an automatic transmission shop specialist.

Posted on Jul 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

700r4 transmission, my transmission is doing high rpm before shifting up from 1st gear, but with no slippage in any gear, rest of the upshifts are firm.BUT, on kickdown from 3 to 2.gear its going as i


I don't know if this will help,but i set my tranny up to shift hard like you are describing. Just by putting a clip on the kick down cable. The book talks about this, its cool if you like that sort of thing?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jeff_24365d731679262d

Jan 29, 2014 | Cars & Trucks

1 Answer

Transmission Problems


sounds a little like timing chain jumped with all the hi voltage on emissions sensors. also check computer for faulty output voltage which could cause all the high voltage readings. Computer is set at 5.1vdc, any other like 6 volts or higher replace computer.

Feb 02, 2013 | 1998 Chevrolet C1500

1 Answer

My 2001 GMC Jimmy 4x4 Automatic with 84K miles. It winds when I put it in reverse and I think I only have 1st and 2nd gear. Additionally it revs high, like over 3000 rpm, delays and then eventually...


It winds up in 1st and then shifts right from 1st into 3rd. Then never shifts into 4th. Plus rev is gone. You broke the sun shell. The transmission will need to rebuilt or replaced.

Oct 30, 2010 | 2001 GMC Jimmy

2 Answers

98 tahoe 700R4 TRANS WONT SHIFT INTO REVERSE AND REVS UP TO 3000 RPM BEFORE SHIFTING INTO 2ND AND THEN IN DOESN'T SEEM TO SHIFT INTO THIRD.


sorry to tell you this, but those are the symptoms of a bad transmission. there is no solenoid or fuse that will take care of your problem, but to replace the transmission. hope you find a good cheap one..god bless

Feb 20, 2010 | 1998 Chevrolet Tahoe

2 Answers

Reverse out on 94 Chevy 1500


Look under the truck and check for loose or broken wires leading to the transmission, if this looks ok you probably have an issue with the transmission electrol control module, these units are about $100.00 used from a junk yard and you will be taking a chance since this may not solve the problem, make sure the transmission filter is not clogged or fluid level is low.

Sep 24, 2009 | 1994 Chevrolet K1500

1 Answer

89' Chevy Silverado Truck- All gears work but REVERSE


Check the linkage at the transmission. Have somebody move the selector while you watch the linkage move. It might be out of adjustment for reverse, or be binding up.

Aug 20, 2009 | 1994 Chevrolet S-10

2 Answers

Does my pickup have a 700r4


Yes it is a 700R4. They went to a 4L60E in 1993. Good Luck

Jun 05, 2009 | 1990 Chevrolet K2500

7 Answers

700r4 transmission problems


just rebuilt700r4 transmission and it is sliping in reverse what can cause this.

Dec 11, 2008 | 1991 GMC C1500

Not finding what you are looking for?
1994 Chevrolet C1500 Logo

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...