SOURCE: emergency brake light comes on while driving
The wire that connects to emergency brake is loose, and grounding out. It probably just needs to be tightened up.
SOURCE: day light
turn the headlights on and off until the nitro beeps at you, that means you have manually over ridden the head lights. I own a Chevy S-10, and I can mash the button 5 times and the lights will shut off.
SOURCE: 2008 dodge nitro 3.7 engine. The engine missfires
Have it checked for trouble codes sounds like it could be an injector problem or something as serious as a loose rocker,maybe try a crank&cam shaft position sensors
SOURCE: 2008 dodge nitro change oil light how to turn off ...
Directions are in the book, but you would put the key in and turn it all the way, just don't start engine. Pump gas pedal all the way to the floor 3 times slowly, but it has to be with 10 seconds. Turn key off and when you start again, oil changed chime and warning should not be on. If it is, try again.
SOURCE: check engine light is on.
you'll need to pull the codes. There are hundreds of possibilities. With the code(s) you will be able to identify the problem a lot easier. Call around, some parts stores will pull codes for free. Shops will usually have a fee that includes the diagnostic time to figure out the cause of the code and determine the correct repair.
Some common things are loose gas cap or O2 sensor issues but like I said it could be any number of a hundred or so different things.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
229 views
Usually answered in minutes!
×