2001 Hyundai Sonata Logo

Related Topics:

R
Rod Henderson Posted on May 30, 2015
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How do I remove the alternator. It is an east west engine. v6

1 Answer

Ted Maxwell

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Hyundai Master 3,519 Answers
  • Posted on May 31, 2015
Ted Maxwell
Hyundai Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Sep 08, 2009
Answers
3519
Questions
2
Helped
724682
Points
11729

Hi Rod:
- Remove serpentine belt.
- Unplug/disconnect wires from alternator. It's a good idea to label them. Taking a picture or two also can help.
- Unbolt alternator.
- Remove.... some vehicles make this awkward by having other bits in the way.
Be patient and keep track of what you're doing since you'll have to reverse the procedure to put the new one in.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Does the motor have to be removed to do timing on a x type jag 2.0 diesel

Being an east-west engine layout and considering how restrictive the engine bay is in the X-Type, it would be advisable to remove the engine to replace the timing chains and guides. In the long run not only will it save you time but you'll have full visual access to the front timing cover and have an easier time in lining up all the timing marks.
0helpful
1answer

2008 jaguar xk engine is completely seized, do i have to remove it with the transmission

if the engine is installed in a conventional manner front to back, you can remove the engine separate to the transmission
if east west installation
then whole unit removal is generally quicker and easier
before you start , get a workshop manual and that will explain the procedure
0helpful
1answer

I have a Citro?n C5 III V6. Ignition fault on number 1. Were is that?

looks like you have to take off some plastics

it will be the coil pack to number one cylinder
in general
number one cylinder on a V6 east west ..is normally
closest to the serp belt on the front bank
26227340-ruh0it1i30kfmyinqfd3ogcx-3-0.jpg
1helpful
2answers

Best way to remove an engine from a 2008 Jeep Patriot thru the top or bottom?

all depends on what the workshop is set up with
east west motor
if no car hoist
looks tight to take out from the top


26202189-vawceempqax4uiikkt2pd3o4-1-0.jpg

26202189-vawceempqax4uiikkt2pd3o4-1-2.jpg
0helpful
2answers

2002 Ford Focus ZX3 engine diagram that shows where the alternator is

The alternator will be somewhere on the front of the engine. IE/ being an "east west " engine, look to the side of the engine as the engine is mounted sideways. Follow the drive belt and you will find it.
0helpful
1answer

I have an ODB1&2 diagnostic tool that has an adapter for Chrysler

It should be on the driver's side somewhere. I believe the computer is at the left front in the engine bay, so check around there.
0helpful
4answers

320cdi v6 firing order

In a 3.2 V6, the passenger side (Bank 1) has cylinders 1,3, and 5.
The driver's side (Bank 2) has cylinders 2,4, and 6.
9_2_2019_7_18_00_pm.jpg
0helpful
1answer

92 regal trouble removing the rear rotor

Spray some penetrating lubricant around all the edges of the rotor (front and back), give it about 25-30 minutes to soak in, and then go to town on it with a hammer banging on one side and then the other (North south, East west, South east north west etc)
1helpful
1answer

2010 ford fusion compass trouble with east and west even after cal per manual info going east show west. n-s fine

Might be a problem with the compass module itself. Since the car is new, and still under warranty, take it to the dealer. They will fix it free of charge. Trying to repair it yourself may void the waranty.
Not finding what you are looking for?

132 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...