You should be able to check and replace it but first check that the fuse has not gone, are the other dash lights on?
If it was blinking rather than going straight out it might that some wire has come adrift . Start with the fuse as the removal of tachometer can be fiddly
Good Luck
SOURCE: changing instrument panel light bulbs
You have to remove the entire cluster assembly to get to the bulbs, there is no other way, no room for this man's hand at the back.
SOURCE: instrument panel not working
Look in the Fuse Relay box under the Hood and Replace the Guage Relay. Should get it Fixed.
SOURCE: 2000 Chrysler Voyager Instrument Cluster is dead
have you got a dimmer switch on your model to dim the dash lights. if you have it may be faulty. link the cables together if the lights work the switch is faulty. if you have not got a dimmer switch
your printed circuit on the back of the dash may be faulty or the plug in the back of the dash is not pushed all the way in. hope this helps
SOURCE: instrument panel cluster gauges and odometer has stopped working
I had all my analog instrument panel gauges stop working after they did the state emissions test. I found the proper fuse in the fuse block located under the hood. Simply unplugged the fuse, noticed it was still good, and plugged the same fuse (10A) back in and all the gauges started working again. Guess it needed a reset atfer they plugged in for the emissions.
41 views
Usually answered in minutes!
×