Question about 1989 Jeep Wrangler
Posted by Anonymous on
It is possible that the shift linkage has become loose and shifted but it is more likely that an intermediate gear or another component inside the transmission has become broken. This may require a transmission rebuild to correct.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/dave_fb2c45146b845cea
Posted on May 23, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
yes i have heard of this and my friend is on the second transmission in his 2006 2500HD.the first time there was internal issues and the second time they ended up changing out the whole tranny.
Posted on Jan 13, 2009
The same thing happend to one of my wranglers, a 95 yj 4cyl 2.5 liter. The "Aisin AX-5" is the transmission that jeep used on the yj and tj 4cyl and 83 cherokee and up 4cyl, and the "Aisin AX-15"was used on some of the 6cyl models. Both are a "light duty" transmission according to the transmission manufacturer. As everyone knows, A jeep is no light duty vehicle, the shifting slider, a fork like item slides the gears back and forth over the drive and output gears to change the gears. and with heavy use or lack of maintanice they can break, they also can break cause of the cheap casting they used in the tranny. Other problems happen in those trannys too. The only thing is to tear the tranny apart and find out what failed and replace. I did this on the kitchen table ofer a day off. being the up own an early 90s yj, If you are one who doesn't work on their own car, I would find a good garage that is good with jeeps, they are not to expencive to fix, and when they are taken care of, will be a joy to own.
I hope this helps, Jeep ownership is a great thing.
Posted on Feb 12, 2009
Ratio codes generally indicate a pressure loss & slipping which the computer reads as a gear ratio problem. Likely you need a rebuild.
Posted on Mar 16, 2009
Tips for a great answer:
Dec 13, 2013 | 1999 Jeep Wrangler
Oct 25, 2012 | 2000 Jeep Wrangler
Mar 25, 2011 | 1989 Jeep Wrangler
Oct 28, 2017 | 2004 Jeep Wrangler
Nov 06, 2009 | 1988 Jeep Wrangler
Jun 11, 2009 | 1998 Jeep Wrangler
Jun 10, 2009 | 1989 Jeep Wrangler
260 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: