I replaced ignition and thats the only key I have .and I cant disable alarm on 96 gs 300 what are my options

Hello, to help you alleviate your headache and time consuming catastrophe of disassembling the factory alarm to start your Ram, I believe I can help wrap up the wound a thief has left you with. First off, the immobilizer involved in the ignition and the chip in the key is not a easy task to just "jump". In actuality with less than $200.00 your Ram could be on the road without having to "rig" or "bypass" the factory alarm system. Simple to change out the ignition key switch. Usually comes with programming instructions, ignition switch with immobilizer attached, and new keys to reprogram yourself. Available at any local auto parts stores or dealership. Max time, 1 hour. Simple tools needed. Second option is to go to dealership, with VIN number of your ram, and buy a new key with a chip matching OEM immobilizer and ignition switch. Coat is under $100.00. Only thing about this is you will have to have locksmith cut the key to fit the ignition.
Hope my suggestions will help you alleviate your trouble. Thank you

when you lock the doors it automatically arms itself. you can disarm by inserting the key in the driver's side door and unlock the door lock, it should disarm if the alarm goes off.

1 Turn the ignition key counter clockwise in the driver's side door to unlock the car. This deactivates the alarm long enough for you to gain access to the vehicle. Then, place the key in the ignition and turn the key until it clicks once. This starts the car's battery, but doesn't ignite the engine. The LED light on the dashboard should stop blinking, indicating the alarm is temporarily disabled.

2 Locate the box for the alarm under the dashboard on the driver's side of the car. Then, look for the override button on the box. Typically, the small button is either red or black. With the ignition key in the "on" position, press the override button and hold it in until the alarm chirps once. This disables the alarm until you manually reactivate it.

3 To reactivate the alarm, turn the key to the "on" position and press the override button once. The alarm chirps twice, indicating the alarm is active.

Hope this helps!

on a Lexus you CANNOT disable the alarm/immobiliser.its built into the main computer.any attempt to disable will KILL THE CAR...

either the starter motor is loose or the teeth are stripped from the starter motor which means it cant connect to the flywheel to turn the engine

all you have to is start the car and it should turn off

Hi you should check,ignition swith,, starter selenoid, starter relay. good luck......

There is an anti-theft relay that is stuck open. that needs to be replaced. I'm unsure of the location, probably under the dash somewhere. it will be a small, plastic box about the size of a pack of cigarettes.

I would say you have two options, You can take it to the dealer and have it disconnected, or you can go to an aftermarket car stereo/alarm store they will install an aftermarket alarm and disable your stock one at the same time, for probably about as much as the dealer would charge to just disable it. First just call the dealer to get a quote on how much that would cost, and then call the alarm place and get a quote.
Thanks,
Lee