2004 BMW 3 Series Logo
l
larry d brugh Posted on May 03, 2015
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

2004 bmw service engine soon light ,tried to reset with the key in the 2 position for the computer, all i get is the test mode

1 Answer

tom cassidy

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

  • Master 1,585 Answers
  • Posted on May 03, 2015
tom cassidy
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

Joined: Oct 25, 2014
Answers
1585
Questions
3
Helped
323019
Points
3520

Dianogastics needed

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
8answers

How do I rest oil change light on a 2001 1500 silveradeo?

Place a piece of black electrical tape over it ,problem solved .you know the oil is good
0helpful
2answers

Engine Check light

Take it to autozone or another place like it and have them read the codes and tell us what they are.
3helpful
1answer

How do I reset the change oil light after changing the oil. It did not go out.

Try this and if it does not work let me know.

1. Turn the ignition key to the "ON" position without starting the engine.
2. Fully press and release the accelerator pedal three times within five seconds.
3. If the CHANGE OIL SOON indicator flashes two times, or the display reads "OIL LIFE INDEX RESETTING 100%" then the system is resetting.
4. Turn the ignition key to "OFF", and then start the vehicle.
5. If the CHANGE OIL SOON indicator comes on and stays on, or CHANGE OIL SOON is displayed then the system did not reset and repeat the procedure.

1. To reset the OIL LIFE indictor if equipped with a Trip Computer, press the TRIP MODE button until the light appears next to OIL LIFE.
2. Press and hold the trip RESET button until the oil life percentage changes to 99%.
0helpful
3answers

Yellow oil symbol kept turning on

this could be due to low oil. you need to check your oil level. if it is full i would do an oil change with a bmw filter. there is a difference in filters. the service engine soon light will have to be diagnosed. meaning pull codes to point you in the right direction. great car though. happy holidays
7helpful
1answer

Maintenance light flashing

h) Engine Oil Replacement Reminder
Light (for vehicles sold in U.S.A.)
This light reminds you when to replace
the engine oil.
This light will come on when the ignition
key is turned to “ON” and will go off after
about a few seconds.
When you drive for about 8000 km (5000
miles) after the engine oil replacement,
this light illuminates for about 3 seconds
and then flashes for about 12 seconds
with the ignition key turned to “ON” position.
If you continue driving without the
engine oil replacement, and if the driving
range exceeds 12000 km (7500 miles), the
light will come on after the ignition key is
turned to “ON” position. The light will remain
on thereafter.
If the light is flashing, we recommend that
you replace the engine oil at an early
opportunity depending on the driving and
road condition. If the light comes on, replace
it as soon as possible.
You need to reset the light after the engine
oil replacement. Reset the light by
following the procedure below:
1. Turn the ignition key to the “OFF” position
with the odometer reading shown.
(For details, see “Odometer and two
trip meters” on page 136 in this Section.)
2. Turn the ignition key to the “ON” position
while holding down the trip meter
reset button.
Hold down the button until the light goes
off. Before the light goes off, it illuminates
for 3 seconds, flashes for 2 seconds and
illuminates for 1 second.
If the system fails to reset, the light will
remain flashing.


I copied this from page 143 of the owners manual for the 2004 4Runner
7helpful
1answer

Service engine soon light on in 2004 buick rendevous after accident. no codes given. turns on when engine starts.ran scanner- no codes... had to reset everything after car repairs. told not related to...

oh thats the change oil light expect it every 3500 to 4500 miles they glow.. you can usually reset it by holding down the trip button with the car off and then turn the key to the II position where everything lights up
so read me >>>>>
Buick Rainier 2004-06, Buick Rendezvous 2002-05 w/o (DIC) Driver Information Center
Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three time in five seconds. If the CHANGE OIL SOON’ indicator flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on for five seconds, repeat the procedure.
Buick Rainier 2004-05 wI (DIC) Driver Information Center
The DIC display is located on the instrument panel cluster above the steering wheel. The DIG buttons are located on the steering wheel. Press button with the gas pump symbol to display engine oil life. Press button with the arrow symbol to reset engine oil life display.
Buick Rendezvous 2002-06 wI (DIC) Driver Information Center
To reset Service Reminder Indicator, turn ignition on with engine not running. Press the MODE button until DIC reads oil life left hold SET to reset. Press and hold the SET button until 100% is displayed. You will hear three chimes and the change oil message will go out. If the CHANGE ENGINE OIL’ message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.
1helpful
2answers

Service engine soon

hi, this is just a reset issue. sometimes the CPU can become confused. the original warning that informed you about your gas cap is still in the cpu's memory. you will have to reset the cpu and, this will clear the warning. After the reset, it will stay off. chevy cpu's tend to do this from time to time.
5helpful
4answers

Service Engine Soon light on 2002 BMW X5

go back & sleep with the mechanic, that always works for my sister.
1helpful
1answer

Service engine light is on

if the check/service eng soon light is on a problem has occurred in one or more of the electronic systems of the emission system/engine management, it is very rare you will feel anything, the system has very good failure mode programming to keep that from happening, at this point the only thing will be that it won't pass a smog test, or the mileage may be affected. Have a test run to see which codes are present in the computer memory.
Not finding what you are looking for?

463 views

Ask a Question

Usually answered in minutes!

Top BMW Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

old marine
old marine

Level 3 Expert

2426 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...