Question about Dodge Cars & Trucks

1 Answer

Replace thermostat on an 06 Dodge Charger - Dodge Cars & Trucks

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Dodge Master
  • 813 Answers

Depending on what engine you have it would be where the bottom radiator hose meets the engine

Posted on May 03, 2015


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 11896 Answers

SOURCE: 06 dodge charger hemi 5.7

They are in the heads, sometimes they are hidden by a plate. Just follow the wires from the coil pack and it will lead you right to the plugs. It is always best to use manufacture's spark plugs. The universal aftermarkets are just not as good. You should use what is made for your specific car for best results. Probably AC Delco or BOSCH

You can go to and register for full free online repair manual for your car

Posted on Oct 13, 2009

  • 231 Answers

SOURCE: Where is the thermostat for a '06 dodge charger

which engine?

Posted on Apr 14, 2010

  • 1 Answer

SOURCE: 06 dodge charger rt w 5.7 hemi engine has clunk in front end

The LX platform consists of the 300, charger and magnum.

They will all have front end noise. It's just a matter of time. This appears to be a poor design and should be recalled.

The front end should be replaced with energy suspension bushings and greasable ball joints.

The front end needs to be inspected, but here are the usual suspects. Most to least

1. Stabilizer bushings to frame. Rattle and bump sound. Not too expensive.
2. Tension struts - radius arm as some may say. Makes a poping noise and moans when driving and turning.
3. Stabilizer end links if loose to touch. Noise over bumps only.
4. Tie rods. Primarily outer. If you can turn them by hand they need changing. These make noise when braking and turning. Inner is more pronounced when steering. May cause road wander.
5. Upper and lower control arm bushings. Creak!
6. Ball Joints. These sound like an orchestra when going up a driveway. The most expensive fix on these cars. Up to 1800.00 dealer cost. They do not press out the old joints. They use a new knuckle.
7. Steering rack... another expensive fix. Moans and hisses.

Posted on Sep 13, 2010

  • 298 Answers

SOURCE: replace thermostat on 2.7l dodge charger

here ya go, i was gonna explain how, but this was easier . hope this helps. ;-)

Posted on Apr 05, 2013

  • 379 Answers

SOURCE: how do you change radiator on a 06 dodge charger with a 2.7 eng

well you take the hose off and you pull the filling canister out then you unbolt the radiator usllally there bolted to the top there should be little mounts on the top of the radioator

Posted on Apr 15, 2013

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


need thermostat or water pump going out fan in water pump slipping

Mar 27, 2014 | 2006 Dodge Charger

1 Answer

How do you change radiator on a 06 dodge charger with a 2.7 eng

well you take the hose off and you pull the filling canister out then you unbolt the radiator usllally there bolted to the top there should be little mounts on the top of the radioator

Apr 15, 2013 | 2006 Dodge Charger

1 Answer

06 charger overheats

it could be ur radiator and or thermostat

May 17, 2012 | 2006 Dodge Charger

2 Answers

How to replace a thermostat on a 2010 dodge charger 3.5l

location of thermostat on a 2010 dodge charger 3.5 eng

Jan 17, 2012 | 2010 Dodge Charger

1 Answer

I have an 06 charger 2.7 that runs hot. I have replaced the upper rad hose, water outlet, and the 3 hoses that run under the intake back to the firewall( from the water outlet). I was about to replace the...

If the thermostat is stuck closed there will also be no flow. This is way more likely than a water pump and would first on my list when diagnosing a no flow overheating issue. I'm pretty sure the 06 charger has a 3.5, 5.7, or a 6.1 liter as an option. Are you sure you have a 2.7? On the six cylinder the thermostat is located behind the housing bolted to the block that the lower hose is connected to.

Jul 03, 2011 | 2006 Dodge Charger

1 Answer

Where is The thermastat on 06 3.5 Dodge Charger

hi you can locate the thermostat by, locating the top hose on the radiator, then follow that to the engine/motor where it attaches to the engine/motor this is the thermostat housing, thats where your thermostat will be....hope this helps

Oct 10, 2010 | 2006 Dodge Charger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides