Question about 1994 Chrysler LeBaron

3 Answers

Replacedfront rotors on driver side, both calipers,and pads. But cant drive 5 miles without smoking from wheels and dmell of burning brakes. What do i do. '94 chrysler lebaron

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Are you sure youve got the right sized rims on there?

Posted on May 02, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 496 Answers

Hi check the rubber brake pipes. Some times the collaps inside and will allow the pressure to travel trough but restrict its return flow. Hope this helps. Regards Jim...

Posted on May 02, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 2,899 Answers

Try this:

Posted on May 02, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have to continuously replace calipers on my jeep, what is the problem?


wonder if the rotors are too slim. If this happens the brakes get too hot as the rotor radiates away the heat. If too hot the brakes could wear out faster.

Aug 16, 2015 | 2003 Jeep Grand Cherokee

2 Answers

2002 Ford Excursion 7.3 4x4 rear brakes getting smoking hot. Noticed it on driver side first. Assumed the rotor was sticking, replaced it and the hose. Relaxed pads and found the pads on passenger side...


There are a number of issues that can cause overheating disc brakes. Disc brakes, when released, separate from the disc by the action of the rotor moving between them (since no rotor is perfectly true, there is a small about of wobble and it pushes the pads away from the rotor surface). Things that can cause this to go wrong are:

  1. Caliper pistons that have rust rings that cause sticking. This most often will happen right after or shortly after replacing old, work out pads with new ones. Because the caliper piston was extended out farther with the worn pads, its surface may get rusty. This rust can cause sticking when the piston is pushed back into the bore with the new, thicker pads.
  2. Caliper slide bolts will rust and get sticky, not allowing the caliper to release properly and re-center itself on the rotor. What you often see here is that one pad (inner or outer) is totally worn out and the other seems normal.
  3. Rusty brake lines/caliper internals can cause restrictions in the flow of brake fluid and hold pressure after the brake pedal is released.
It is highly recommended that whenever you change your brake pads, you replace the caliper slide bolts use a new brake hardware kit when reinstalling. The additional cost is almost always saved in longer brake pad life, and fewer complications.

Mar 19, 2015 | 2002 Ford Excursion

1 Answer

How to replace front brake pads on a How to replace front brake pads on a 2000 Chevy S10 4WD pickup?


First you want to remove brake fluid from brake resovoir, raise front wheels off ground and set park brake or block rear wheels. Remove front wheels, keep steering wheel unlocked so you can turn rotors side to side. Loosen bolts that hold caliper end gently pry caliper free from rotor, remove caliper and remove pads, use bungy cord to hang caliper away from rotor, have rotors measured to see if they are thick enough to have machined, replace if out of specs. Match up pads with old ones, use anti- squeak red liquid and put layer on back of pads, let dry. Use tool to put pistons back into calipers, slowly put pistons back into bore while opening up bleeder screw so ABS won't be damaged. After rotors resurfaced, wash with rubbing alchohal to remove any oils from hands, install rotors and reverse putting pads back onto caliper and reinstall, torque caliper bolts to factory specs and tighten bleeder screws. Install wheels, torque lug nuts to factory specs and replace brake fluid in resovoir. Lower car carefully to ground and press brake peddle without pumping it. Any air in system should bleed out, if not get someone to help with bleeding system. Road test to ensure no squeaks or pulling, burn brakes in slowly.

May 10, 2014 | 2007 Saturn Aura XR Sedan

1 Answer

Driver's side front brake became suddenly stuck ( and mildly smoking) on my 1991 ford aerostar xl that has been excellently maintained. The 'Rear Anti-Lock' brake light came on yesterday and stayed on, and...


yes baby it to him and replace both calipers and rotors as they will work better with your new brake pads. Do Not Do a half a job when it comes to brakes. its your family you are dealing with. calipers are cheap rotors are cheaper and pads are also cheap. its 3 hours labour to do a complete front brake job and rear brakes take 2 hours. with new shoes turn drums replace wheel cylinders and new rear brake hardware price in Canadian for front brakes under 400 price for rear under 250 American parts prices slightly different but labour times the same

Sep 18, 2013 | Ford Aerostar Cars & Trucks

1 Answer

Replaced rear brake pads and rotors on truck. Now truck will stop on its without touching the brake pedal and if you drive a mile they are smoking and red hot. Burning smell. Any suggestions????


Yes sounds like you did not reset the calipers when you done that.You need to open the bleed valve on them and press the pistons back in.You have them adjusted out too far.After you get that all done drive the truck backwards 50 feet then fowards.Do this 4-5 times to adjust them correctly.Try a school parking lot to do this in.

Jan 01, 2011 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

How can I change the rotors and brakes on a 2006 Cadillac?


Front brake
Step 1: Identify Front Disc Brake Components
brake_pads_rotor.jpg
Front Wheel Drive Brake Assembly
Most front disc brake components include: brake rotor, brake pads, brake caliper, caliper mount and brake flex hose. Brake service usual occurs between 20,000 and 40,000 miles depending on driver habits, road conditions and brake pad/ rotor materials used.
Step 2: Remove Brake Caliper to Replace Pads
brake_pad_set.jpg
Removing Brake Caliper Mounting Bolts
Locate primary caliper mounting bolts; apply wrench pressure counter-clockwise (When looking at the head of the bolt) to remove the bolts, upper and lower. Make sure the bolt threads are in good shape and replace if necessary.
Step 3: Remove Front Brake Caliper
remove_brake_caliper.jpg
Remove Front Brake Caliper
After removing the primary caliper mounting bolts lift the brake caliper off of the rotor and then tie or secure to the side, being careful not to bend or kink the brake caliper flex hose. Thoroughly inspect brake caliper and brake hoses for leakage, cracks or chaffing and replace as needed. Next remove the brake pads (If not mounted in the caliper) and secondary caliper mounting bolts. Notice how great protective gloves work, most technicians use them on the job today.
Step 4: Remove Brake Pads
remove_brake_pads.jpg
Remove Front Brake Pads
Once the brake pads have been removed, make sure if there is anti rattle hardware to transfer to the new brake pads. Some brake pad manufacturers will include the proper lube (Caliper slides) and anti-rattle hardware to ensure proper performance of their product.
Step 5: Remove Caliper Mount
remove_brake_pads_holder.jpg
Remove Caliper Mount Bracket
Finish removing secondary caliper mount bolts and remove caliper mount. Note: clean and lube caliper slides and pad friction surfaces of all foreign material or build-up.
Step 6: Remove Brake Rotor
brake_rotor.jpg
Remove Brake Rotor
With the caliper mount out of the way you can now remove the brake rotor. Sometimes it can get stuck so you may need to tap it with a hammer or use penetrating oil to free it up. Some manufacturers use small screws to hold the rotor on as well. Clean and inspect wheel studs, replace if any are damaged. Also clean bearing hub rotor mount surface to ensure the proper mounting of the new brake rotor. Inspect the ABS sensor wheel for cracks or damage and replace as needed.
Step 7: Depressing the Brake Caliper
compress_caliper.jpg
Resetting Brake Caliper
To install the new brake pads you must retract the brake caliper piston. Remove the master cylinder lid or open the brake caliper bleeder screw to allow excess brake fluid to be released if necessary. Install C clamp tool and gently tighten clamp until caliper piston is fully depressed. Note: use old brake pad to protect the caliper piston. Close the bleeders once the piston is retracted completely
Step 8: Installing New Brake Rotor
new_brake_rotor.jpg
Install Brake Rotor
Install new brake rotor, the new rotor is manufactured with a protective film over the rotor to keep it from rusting, remove protective film with brake cleaner before installing; also after the brake job is complete you may experience a small amount of smoke from the rotor when first used. This is normal and will go away after the first couple of uses.
Step 9: Installing New Front Brake Pads
new_brake_pads.jpg
Installing New Brake Pads
Reinstall the front brake caliper mount, and then install front brake pads. Make sure the pads are seated properly in the caliper mount; it must be a close fit to work properly..
Step 10: Reinstall Front Brake Caliper
front_brake_rotor_pads.jpg
Re-Install front Bake Caliper
Reinstall front brake caliper and reinstall caliper-mounting bolts, recheck all mounts and mounting bolts. Check the caliper slides to be sure there is no bind and that the caliper moves freely back and forth on the caliper slides. Bleed brake system per manufacturer's specifications to relieve any air trapped in the system. Before driving the vehicle, push the brake pedal down and let it up slowly, repeat until normal brake pedal operation resumes, this operation is forcing the brake pads to travel to the brake rotors.

Dec 18, 2010 | 2006 Cadillac STS

1 Answer

How to replace rear brake pads on 2002 buick rendevous


Those are special calipers. The piston cannot be just compressed back into the caliper - it needs to be turned as it is compressed or you can ruin the caliper.There is a kit you can rent from AutoZone or many independent auto parts stores that will perform both functions at the same time.
Block fron wheels and raise vehicle passenger side. Remove wheel. The caliper is on the top rear side of the assembly you're looking at.There are 2 long bolts you'll need to remove to take the caliper off the vehicle. Don't remove the brake line or open the bleeder screw ( either of these moves will add to your work!! ) Insert a large flat blade screwdriver in between the rotor and outboard brake pad and pry away from the vehicle slightly to release the pads from the rotor. Slide caliper upwards and towards the back of the vehicle to separate from rotor. The pads will come in a full set ( all 4 pads for both side of the rear ) . Look at your replacement pads and determine if they have a retainer clip holding them in place or a compression clip. Remove outboard pad first then inboard. Match old pads to replacement pads. Inspect rotor for grooves and irregular surfaces - if any grooves or irregularity present, remove rotor and take to an auto parts store for refinishing.Compress caliper piston with kit and allow 5 minutes for pressure to bleed back into the master cylinder.install rotor if removed and wipe surfaces with brake clean. Install inboard then outboard pad and place caliper on rotor, then mount to vehicle. Install wheel, repeat procedure for drivers side, then PUMP BRAKE PEDAL 5 TIMES BEFORE TRYING TO DRIVE VEHICLE to set pads on rotors.

Nov 26, 2010 | 2003 Buick Rendezvous

1 Answer

Front breaks are smoking


caliper is sticking or pads are sticking ,proportioning valve with vehicle jacked up and supported and wheel removed inspect pads and rotor for damage excessive wear if good- turn hub/rotor by hand have someone assist u by stepping on brake observe brake caliper stop then release brake piston should release slightly from pad try turn hub again w/out touching brake if stuck in place replace and caliper released replace pads if caliper still clamped remove caliper and inspect for leak or damage compress caliper and try brake again if does if sticks again replace caliper

Oct 13, 2009 | 1988 Dodge Ram 50

1 Answer

While driving today I noticed a burning smell and when I got out the front right wheel had smoke coming from the rotor and brake assembly what sould I do


Sounds like either the brake caliper has seized up or one of the brake pads has got jammed up. You need to remove the caliper and investigate further. ICheck to make sure the piston/s in the caliper move. Also remove the brake pads , clean up the slides and apply some brake grease on the tips of the brake pad metal backs where the may contact with the caliper and mounting brackets.

Apr 12, 2009 | Ford F-350 Cars & Trucks

1 Answer

Front brake pads for 1997 ford ecscort encore


The binding of the brakes is causing the pads to overheat, which is causing the smoke. You need pull the wheel and check things out. Your caliper must be bad (not releasing). You need to replace the caliper, brake pads, and have the rotor cut (a full service parts store or shop cuts the rotor perfectly smooth on both sides), or replaced (it may be cheaper to just buy a new rotor). You should also always change the pads (and check everything else) on the opposite side. So, if u do the brakes on the driver side front, always do the front pass. side at the same time, likewise if u do rear brakes.
Whenever you do brakes u should also flush out the brake lines (by bleeding the brakes) until the brake fluid flows absolutely clear. Old brake fluid is the #1 reason for caliper failure. I've seen many times people replace brake components w/out changing the brake fluid, only to have the brakes wear out very quickly, or not function properly. good luck! hope this helps> please rate this!couontrycurt0

Oct 12, 2008 | 1998 Ford Escort

Not finding what you are looking for?
1994 Chrysler LeBaron Logo

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...