Question about Lincoln Cars & Trucks

2 Answers

WHATS TOURQUE SPECS FOR REAR WHEEL HUB ON 2010 LINCOLN MKX

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 2,428 Answers

TORQUE is deturmaned by the size and grade of the bolt as well as the theard pitch.
Nuts usely have higher torque values .For example a nut that holds a CV joint with no bearing involved could be 140 lbs but if a bearing is being compressed 140 lbs would crush the bearing it would not spin .
So if you are dealing bolts look at the head of the bolt you will see lines on it the more lines the harder the bolt is and the more threards per inch the more torque it will need .
If your unsure get what is called blue locktight not red or white blue .
If you are dealing with a bearing nut then its a feel thing slowely tighten it until has some restinance on side to side movement and most of the time if you repacked the bearing /new gresse you will have to retighten again in a few months after is wares in and seats

Posted on May 02, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Lincoln Master
  • 2,899 Answers

Info I can find is 100 ft lbs.

Posted on May 02, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 lincoln mkx has mass air flow sensor code have replaced it twice unhooked battery for 10 minutes few days later code will return


I had a similar problem find fuse for the mass air system pull fuse and also pull fuse for computer wait ten minutes replace fuse for air mass system then replace fuse for computer this saves restting all your clock memories ,if the warnings come up again you will have to look further into the system looking for intermintent faultsor go to a service centre to have the problem rectified

Nov 02, 2016 | 2010 Lincoln MKX

1 Answer

2011 MKX Rear camera works, but parking assist quit showing up on the screen. Dealer says the camera needs to be replaced. Is this correct?


2011 MKX Rear camera works but parking assist quit showing up on the...

get your car fix right now

Mar 17, 2016 | 2011 Lincoln MKX

1 Answer

How do I inspect rear wheel bearing on a '07 MKX AWD? Making a growing noise.


Go on a test drive with a technician, visit a good workshop for a visual inspection on the wheels

Jan 01, 2015 | 2007 Lincoln MKX AWD

1 Answer

2010 Lincoln MKX factory sun roof does not close tightly.


Let Ford fix it? Get a price it may be simple or complex.

Oct 26, 2014 | 2010 Lincoln MKX

1 Answer

2010 Lincoln MKX Sun Roof is not closing tightly. Meeting a large truck will cause it to raise 1/4 inch and then has a loud wind noise while driving. Seems to have gotten worse in past 4 months. I c


The regulator is bad. Stretched cables, worn gears. You would have to remove the column bezels and the headliners to access the sun roof window. Replace the whole thing as you can't buy one without the other.

Oct 26, 2014 | 2010 Lincoln MKX

1 Answer

Natural gas smell from my lincoln mkx


Cylinder Misfires or a Rich Fuel mix,
that is overheating the Exhaust Converter
& giving you the smell

You have to correct the fuel trim or ruin the
converters

Need professional test equipment & take that
on a road test

A repair shop can do that

Don't need a dealer,nothing special
they do

Mar 12, 2013 | 2010 Lincoln MKX

1 Answer

How do I replace the driver side side view mirror on a 2010 MKX?


SECTION 501-09: Rear View Mirrors 2010 Edge, MKX Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 06/16/2009 Exterior Mirror adobe.gif Printable View (126 KB) Removal and Installation
  1. Remove the LH front door sail panel.
    n0059110.jpg
  1. Disconnect the exterior mirror electrical connector and pushpin retainer.
    n0103912.jpg
  1. Remove the 3 nuts and the exterior mirror.
    • To install, tighten to 9 Nm (80 lb-in).
    n0059108.jpg
  1. To install, reverse the removal procedure.

snorkelbobby_3.jpg

Jul 06, 2011 | 2007 Lincoln MKZ

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

fordexpert

Level 3 Expert

5520 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...