Question about 2006 Jeep Wrangler 4.0
Posted by Anonymous on
Could you describe the "clicking noise" in more detail, ie is it metallic or more like when a card is clipped to a cycle wheel and clicks when wheel spins, are you sure its from the drive train as outer vehicle noises are notoriously hard to pinpoint , difficult to check as you say its only when moving between 5-10 mph but it is worth having the hood up with the engine running and gradually increase revs and listen if the noise appears , also check the condition of all drive belts and tightness of the pulleys they drive , hope this is of some help
Posted on May 02, 2015
Not sure but the problem could be with the transfer case. The transfer case uses a heavy double chain and as it wears it can make a noise.
Posted on May 02, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hay I would check your sway bar in the front .The bal may have came out of the seat located under front wheel well. Also they could be just loose. Check by rocking your jeep side to side .
Posted on Oct 14, 2008
SOURCE: 1991 jeep wrangler clutch
U have what is called a hydraulic clutch, one of the hydraulic cylinders hs failed, there is a master and a slave cylinder. The most likely and most common cylinder to fail is the slave cylinder, this requires the transmission to be pulled out to replace it. the art is around $125.00, while the trans is out u might as well replace the clutch, the labor is about the same. Here is a picture of the part, let me know if u can see it.
Posted on May 13, 2009
I had the same thing happen. Your rear drive shaft u-jount is bad. Also wnat to check the level of gear oil...
Replacing the u-joint takes about an hour to do... not a tough job.
Posted on Sep 30, 2009
By any chance is the transfer case engaged?
A locked drive train could account for the noise being made only on turns.
Bring the transfer case to neutral then back to 2-high.
Or try to duplicate the problem by putting it into 4-high. THAT way the dealership would know exactly what to look at.
Posted on Jan 02, 2010
Tips for a great answer:
Nov 30, 2013 | Jeep Grand Cherokee Cars & Trucks
on Jun 13, 2008 | 2007 Jeep Wrangler Unlimited Rubicon 2...
Feb 20, 2013 | 2009 Jeep Wrangler 3.8
Feb 03, 2011 | 1992 Jeep Wrangler
Apr 23, 2010 | 2000 Chevrolet Cavalier
Jan 15, 2010 | 2006 Jeep Wrangler
Jan 02, 2010 | 2006 Jeep Wrangler
Sep 30, 2009 | 1998 Jeep Wrangler
Dec 04, 2008 | 2005 Mercedes-Benz Mercedes Benz C55 Amg
Feb 07, 2013 | 2006 Jeep Wrangler 4.0
Nov 23, 2012 | 2006 Jeep Wrangler 4.0
59 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: