Question about Jeep Cars & Trucks

Open Question

Timing chain jeep liberty 2004 3.7l diagram - Jeep Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 295 Answers

SOURCE: i am trying to find timing chain marks for 2005

o lord very difficult engine to time man. word of advise don't remove the primary oil pump chain. there are no marks. line the bigger oil pump sprocket DOT to 12 oclock if you have the chain lock tool this makes life a lot easier. Both of the cam sprocket have a V6 mark on it they should be at 12 oclock. If everything line up like that u are golden. Hope this helps. If you need step by step instrutions I will help. Rate me please

Posted on Jul 11, 2009

Ad
  • 164 Answers

SOURCE: Liberty Jeep 2002 at what milage do I change the timing belt?

First does it have a belt ore a chain and most newer one recomend at like 60k ore 90. If got a chain it stretch and you will not get great gas milage but it will not break like a belt

Posted on Jul 26, 2009

  • 114 Answers

SOURCE: Need a Jeep Liberty drive belt diagram.

3f6d05b.gif Here you go

Posted on Oct 15, 2009

  • 1 Answer

SOURCE: need timing marks for jeep liberty

necesito marcar jeep liberty 2002 3.7

Posted on Feb 26, 2010

moparhart
  • 245 Answers

SOURCE: i need a timing chain diagram for a 2002 jeep

This is the procedure on it.


spacer.gif 2008-10-22_161446_1.thumb.gif spacer.gif spacer.gif View Full Image spacer.gif

INSTALLATION

NOTE: Assemble the timing chain, crankshaft sprocket and camshaft sprocket with the timing marks aligned Fig. 5 .

  1. Apply Mopar(TM) Silicone Rubber Adhesive Sealant to the keyway in the crankshaft and insert the key With the key in the keyway on the crankshaft, install the assembly on the crankshaft and camshaft.


spacer.gif 2008-10-22_161528_2.thumb.gif spacer.gif spacer.gif View Full Image spacer.gif

Install the camshaft sprocket retaining preload bolt and washer Fig. 6 . Tighten the preload bolt to 108 N.m (80 ft. lbs.) torque.





spacer.gif 2008-10-22_161605_3.thumb.gif spacer.gif spacer.gif View Full Image spacer.gif


  • To verify correct installation of the timing chain, turn the crankshaft to position the camshaft sprocket timing mark as shown in Fig. 7 . Count the number of chain pins between the timing marks of both sprockets. There must be 15 pins. NOTE: Installation of the timing chain with the timing marks on the crankshaft and camshaft sprockets properly aligned ensures correct valve timing. A worn or stretched timing chain will adversely affect valve timing. If the timing chain deflects more than 12.7 mm (1/2 inch) replace it. The correct timing chain has 48 pins. A chain with more than 48 pins will cause excessive slack.
  • Install the crankshaft oil slinger.
  • Replace the oil seal in the timing case cover.
  • Lubricate the tension spring, thrust pin and pin bore in the preload bolt with Mopar(TM) Engine Oil Supplement, or equivalent. Install the spring and thrust pin in the preload bolt head Fig. 6 .


    spacer.gif 2008-10-22_161701_4.thumb.gif spacer.gif spacer.gif View Full Image spacer.gif


  • Install the timing case cover and gasket.
  • With the key installed in the crankshaft keyway, install the vibration damper, washer and bolt. Lubricate and tighten the bolt to 108 N.m (80 ft. lbs.) torque.
  • Install the serpentine drive belt and tighten to the specified tension, Refer to Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair for the proper procedure.
  • Install the fan and hub (or Temporal fan) assembly. Install the shroud.
  • Connect negative cable to battery
  • Posted on Jul 16, 2010

    Testimonial: "thank you "

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Diagram timing of v6 engine of liberty 2001 model


    that v6 engine has no timing adjustment. it has a timing chain. so if there is a stretch on chain, it must be replaced according to factory service manual. only thing you need to watch is to mark the position of gears before you remove chain. also timing of ignition is maintained by engine controller. if you need a custom setup you need chip tuning for that.

    Nov 30, 2013 | 2002 Jeep Liberty

    1 Answer

    Liberty Jeep 2002 at what milage do I change the timing belt?


    First does it have a belt ore a chain and most newer one recomend at like 60k ore 90. If got a chain it stretch and you will not get great gas milage but it will not break like a belt

    Jul 26, 2009 | 2002 Jeep Liberty

    1 Answer

    Need timing marks for jeep liberty


    necesito marcar jeep liberty 2002 3.7

    May 19, 2009 | 2002 Jeep Liberty

    2 Answers

    DRIVE TRAIN DIAGRAM


    I need the digram of timing chain of a 3.7L engine

    Aug 15, 2008 | 2002 Jeep Liberty

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    214 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Jeep Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Kevin Daniels

    Level 3 Expert

    1455 Answers

    Are you a Jeep Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...