Question about Cars & Trucks

1 Answer

The clutch just spin when hit gas peddle and engine will not fire but it get real hot

Posted by on

  • Stacey
    Stacey May 03, 2015

    I'm sorry it's a 91 Yamaha g8a gas 4 stroke golf cart

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 40,775 Answers

Check for jammed clutch cable or faulty clutch master cylinder as the clutch is slipping from being held partially off or disengaged
It could be a clutch but the other stuff is cheaper to check first

Posted on May 02, 2015

Testimonial: "Thank you I have replaced the drive clutch, now the back clutch is locked up. I replaced fuel pump cleaned carb new plug and fuel filter. It just spinning the new front clutch motor gets hot but will not fire up?"

  • Bill Boyd May 03, 2015

    I think that you will need to add exactly what vehicle you are talking about that has front and back electrical clutches with an carby engine and fuel pump
    Really you are very scarce on information to get a good answer.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you disconnect the clutch master cylinder from the clutch pedal


IF you look at at the clutch peddle, there is a rod coming from the clutch cylinder, that is attached to the clutch peddle arm by a pin , remove the pin, remove the line from the master cylinder, remove the bolts holding the cylinder to the fire wall, and the cylinder will be free to remove.

Jun 03, 2017 | Cars & Trucks

1 Answer

I have a viberation on my 94 grand cherokee awd while accelerating what could cause this


that can be caused by 1/ u joints in the drive shaft 2/ engine mount 3/ bubble in a tire 4/ miss fire in the engine.

Dec 02, 2012 | 1994 Jeep Grand Cherokee

1 Answer

Truck starts but died when i hit the gas


in my 03 1500hd had real rough idel clean the throttle body my truck idels perfectly now dosent take 30min and throttle body cleaners 8$ at autozone theres how to videos on youtube thats what i did

Jul 07, 2012 | 2002 Chevrolet Silverado 1500HD

1 Answer

I need to get the clutch cable off a 1997 vw cabrio.How do i get the cable off the clutch pedal


After disconnecting the cable from the engine compartment remove the lower panel on the driver side. Press clutch peddle to floor then reach around the steering wheel column on the gas peddle side. you will feel a plastic guard. reach under guard you will feel the cable on top of clutch peddle. pull cable up and toward back of car.

Feb 13, 2011 | 1999 Volkswagen Cabrio

1 Answer

I have a 2003 civic when it is hideling it dont give heat but when the gas peddle is pressed it gives heat and the car over heats but when i turn the air conditoner on the hand goes back to cool a soon has...


Sounds like the cooling fan on the radiator has a bad clutch. You may also have a bad thermostat. Replace the thermostat and have the fan clutch tested. It should spin freely with the vehicle off. If the fan is not kicking in when you are sitting still with the engine running you could have a bad fan or fan relay. This will also cause the vehicle to over heat.

Oct 29, 2010 | 2003 Honda Civic

2 Answers

Spinning sound when pushing gas peddle, sitting


try it with the belts off you can start it and see if the spinning noise goes away then it's accessory's like bad alternator or power steering pump but dont run it more than a minute or two or it will start to overheat. and if it still makes spinning noise make sure it's not coming from the transmission /use a broomstick against the engine block near each piston to hear the condition of the pistons if there scored real bad it makes noticable diff noise than a diff piston will make. check the front of the engin the water pump sometimes needs to be replaced because the bearing in it drys up and fails / there sealed bearings in a water pump than go make noise . good luck give you stuff to think about.

Nov 19, 2009 | Dodge Pickup Cars & Trucks

1 Answer

Clear change oil message


turn the ign switch on too where your dash lights come on
then hit the gas peddle 3 times real quick!!
you may have too do this several times too get it cleared!!!

Apr 14, 2009 | 2002 Chevrolet Monte Carlo

1 Answer

Replacing the clutch cable


I started up at the clutch peddle,and hooked that end then let out as much slack as i could, then ran the cable down the front of the engine and over the sterring arm to the eyelet, put the other end through. thats where i was having trouble then it dawned on me to take my pry bar and move the clutch arm forward to meet the eyelet as i did this it allowed enough slack so i could hook that end.then i went back up top to where it goes through the fire wall and made my adjustmants there took about 45 mins to an hour. not to bad.once i thought about it, thank you, john.

Apr 09, 2009 | 1989 Isuzu Pickup 2WD

1 Answer

1992 Ford F250 4x4 7.3 Diesel


those trucks had problems with the fire wall breaking .have some one push the clutch pedle and watch the fire wall from under the hood were the clutch master cylinder bolts too if the fire wall moves u need to buy the repaire kit from ford.

Apr 01, 2009 | 1992 Ford F250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...