Question about 1994 Hyundai Excel

1 Answer

How to remove bottom of back seat - 1994 Hyundai Excel

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Hyundai Master
  • 680 Answers

The lower portion. Along the floor push back and up. Hard.

After it's out you will see the bolts that hold the back portion in.

Posted on May 02, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the rear seats in a 04 Toyota Convertible Solara


If you can't pull seat bottom up at front, ck for bolts at front edge of seat bottom.remove them first ,remove seat bottom. Then bolts for seat back wil be seen at bottom of seat back.

May 15, 2017 | Toyota Cars & Trucks

1 Answer

How to remove backseat


On most GMs, you remove the rear seat by:
1. Stand in the back floor facing front.
2. Pull up slightly on the bottom edge of the seat until it stops.
3. With your heel, kick the bottom edge of the seat backwards in the center of each side of the drive shaft channel to release the clip.
4. Alternative: if the seat isn't just clipped in, there are two 10 mm. bolts under the bottom seat lip.
Once you have the seat bottom out, there will usually be two more 10 mm bolts holdng the seat back in place. After removing the bolts, push straight up on the seat back to disengage the clips.

May 22, 2015 | 1988 Cadillac Brougham

1 Answer

How do I remove the back seat in my 1996 Chevrolet Monte Carlo?


REMOVE THE SEAT BOTTOM FIRST BY PUSHING THE LEADING EDGE OF SEAT TOWARD THE TRUNK UNTIL IT RELEASES. THEN REMOVE THE BOLTS AT THE BOTTOM OF THE SEAT BACK AND LIFT TOWARD THE ROOF TO REMOVE FROM ITS HANGERS

Mar 10, 2015 | 1996 Chevrolet Monte Carlo

2 Answers

How do I remove - pop up - the back seat bottom part of a Toyota Matrix?


sit on seat hands down in front push down and back while also lifting front edge

Feb 07, 2015 | 2010 Toyota Matrix Automatic

1 Answer

How can remove the the back seat of Corolla LE 2009


The back seats usually come with a wire seat holder imbedded within the seat. You have to push down on the knew rest area in an downward and back to the rear of the vehicle motion to remove the bottom portion of the seat. You do this on both sides. Once exposed you will see where the back portion of the backrest seat will have bolts on the bottom of the frame that need to be removed, along with the seat belt screws. You might have to purchase a special six or eight point star torques bit to remove the bolts but they are worth having around.

Nov 29, 2013 | 2009 Toyota Corolla LE

3 Answers

How to remove back seat in 1972 buick skylark


Remove the seat cushion retaining bolts, detach the seat cushion and remove it up and out from the vehicle.

Remove the rear seat back retaining bolts at the bottom of the seat back. Pull up then out to disengage the upper frame from the hangers and remove seat back from the vehicle.

Installation is the reverse of removal.

Courtesy: Haynes GM repair Manual #38025. You can probably find a copy of it on Amazon or eBay cheap

Jun 20, 2011 | Buick Skylark Cars & Trucks

1 Answer

How do you remove the rear seat of 2004 honda accord


Release the two latches at the front of the seat cushion (pull back on the latches to release the front of the cushion).

Remove the seat cushion bolt and remove the cushion (it’s roughly in the center. You have to insert a socket extension between the back and bottom seat cushions to take it out, after you find it by pressuring the bottom cushion and looking back in there).

Remove the bolts (each side) securing the seat side bolsters (they are easy to see once the bottom cushion is removed), then remove the side bolters (gently release the clips that hold them in).

Pull the seat forward, then remove the fasteners securing the seat hinge (seat pivot bracket) and remove the seat backs.

Hope this helps you.

Dec 10, 2009 | 2004 Honda Accord

1 Answer

How to remove interior back dash on 2006 hyundai sonata


The shop manual does not illustrate the procedure for removing the rear package deck (back dash). This will be a lengthy description for removing this deck
1. Remove the rear seat bottom (2 12mm bolts located in between the seams at the seat back and the seat bottom (lower the seat backs and you'll have to feel for them). Remove them
2. Remove the seat bottom (two spring loaded clips at the front of the seat bottom).
3. Remove the 12 mm bolts at the bottom of both LH & RH shoulder cushions. Lift UP and then forward (careful you don't break the should cushion clips at the back of the cushions).
4. Using a small screwdriver, remove the SRS caps at the C-Pillar moldings (behind them are either two phillips head screws or 10mm bolts) - remove them
5. Remove the C-Pillar moldings -- they are 'Clipped' into position (use a flashlight to locate them and a long shaft plane screwdriver to help 'unclip' them).

ff32eaf.jpg lower the seat backs down. Note the trunk accessway side moldings (approximately 8 to 10 phillips head screws) remove them and the accessway moldings (you can'r remove the deck unless you remove these accessway moldings).
6. Find the plastic clips which hold the rear deck in place (usually yellow or blue)


0fbe0c6.jpg Remove the rear package deck.
Now, depending on what you want to do now... it's up to you.
Reassembly is in reverse order.

Jun 19, 2009 | 2006 Hyundai Sonata

2 Answers

Getting back seat off


I imagine you're talking about the seat 'BOTTOM'? two 12mm bolts in between the seat back and bottom (at the seam where they meet). remove them and you can remove the seat bottom). Afterward, you will detect the fasteners holding the seat backs in place. If you remove those, the seat backs will come out.

Apr 10, 2009 | 1994 Hyundai Excel

2 Answers

Gas leaking from on top of the tank


In the 03, the bottom of the back seat has two (2) spring hooks about 12 or so inches from the side (looks like this, o= hook _= front of seat bottom), (_o____o_). Just pull up on each one and the seat bottom will come up and out/forward. The seat back has a couple of bolts that you will see once you remove the seat bottom. Remove bolt(s) and slide the seat back to the outside. There are two (2) "windows" to the tank. One on driver's side that will be visible when you remove the seat bottom (and pull back the carpet and insulation, and one behind the seat-back on the passenger's side (this is where the fuel pump, et. al. is/are. Driver's side is just the second float. There is a wire and hose that connects the two floats, so you may want to disconnect the battery to avoid any electrical current in the tank.

Aug 09, 2008 | 1999 Volvo S80

Not finding what you are looking for?
1994 Hyundai Excel Logo

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...