Question about 1994 Cadillac Seville
Unscrew the screws on the light cover or just pop it out with a screw driver
Posted on May 02, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2002 license plate bulbs
its real simple look at the license plates then look up you will see 2 screw per lamp / unscrew them and slide remove its a 194 bulb so get some ready then replace and put back / Please rate my response thank you very much
Posted on Feb 02, 2009
OK>>> it is very cold here, but nonetheless..I went outside to check on my Oldsmobile for your benefit....On mine (I can't guarantee it is the same for all of the vehicles listed above). If you are looking at the license plate, LOOK UP and you should see the bulb and whatever encasing is there. Mine is in a tube and it is attached with (2) mini bolts that will need to come out first, then it just looks like a simple matter of disconnecting the electrical plug, taking out the old bulb and putting the new one in. I hope this helps someone....
Posted on Feb 23, 2009
It wouldn't be a fuse if that's the only light that's not working, I believe all of the parking lights are on the same fuse. It's most likely a bad ground or corrosion inside the socket where the bulb makes the electrical connection. So check the socket to make sure it has no corrosion, if it does, clean it up and apply some dielectric grease (available at any parts store) to prevent future corrosion, and check for a loose or broken ground wire.
Posted on Apr 13, 2009
LICENSE PLATE LAMP BULB
Posted on Oct 08, 2009
1. Open the hatch and stand under it.
2. Remove pull handle from the inside of the hatch (2 screws under pop panels).
3. Starting in the lower corners, gently pry the entire interior panel from the hatch,
and leave it hanging from the wiper area near the glass.
4. Grasp the bulb housing and twist to the left while pressing inward.
5. Replace with a 1156 bulb.
Posted on Nov 01, 2009
Tips for a great answer:
Jan 15, 2013 | 2001 Ford Windstar
Nov 04, 2012 | 2004 Toyota Prius
Sep 09, 2012 | 2006 Scion xA
Oct 11, 2010 | 2004 Chevrolet TrailBlazer
May 15, 2010 | 2008 Chevrolet Malibu
Oct 21, 2009 | 1990 Honda Accord
Oct 08, 2009 | 1999 Dodge Neon
Jun 06, 2009 | 2000 Lincoln LS
25 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: