Question about 1992 Chrysler Imperial

Open Question

How do i remove fuel rail

Fuel rail removal and replacement instructios

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75117 Answers

SOURCE: replaced fuel relay and fuel filter still won't crank

Yes the fuel tank will need to be removed to replace the fuel pump, be very careful and use only non sparking tools, there is a potential for fire and explosion..

Posted on Apr 18, 2009

  • 743 Answers

SOURCE: How to remove the fuel tank and replace fuel

Are you having a problem with a plugged filter or just doing a service?

Many vehicles no longer have an external servicable fuel filter any more. They are meant to just be left alone. It does not make sense to me because external fuel filters could get plugged. Where is that substance that plugged the external filters going if there is no filter.

Of course you can purchase the part. But that is for the time when the fuel pump needs replaced.

Posted on Oct 14, 2011

  • 4044 Answers

SOURCE: 2001 crystler town & country fuel pump

The Fuel pump is in the tank. The only thing I disagree with in emissionwiz post is whether to drain the tank or not. Chrysler started putting drains on the tanks in 2000 to make this easier when they went to a plastic fuel tank. I would drain the tank from the drain, disconnect the wiring then drop the tank to replace the pump. This all assumes that you verified that the fuse in the interior panel is not blown and the fuel pump relay in the power distribution box under the hood is still good.

Posted on Oct 26, 2011

alicantecoli
  • 22095 Answers

SOURCE: Where is the fuel tank drain plug on 2004 Chrysler concorde

You having a laugh ? drain plug on a car ,their hasnt been a drain plug fitted to a modern car since the 50s

Posted on Apr 13, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Locating the fuel rail on a 2013 chevrolet malibu 2.5 ecotec


Why ? take it to the dealer , still under warranty ? Messing with it voids your warranty .

Dec 31, 2016 | 2013 Chevrolet Malibu

1 Answer

Where is the fuel pressure regulator located?


The regulator is attached to the fuel rail, under the fuel rail cover. Here is a drawing... it is item #4. The drawing is an exploded view - follow the trace-line from the part to the rail cross-over and you see where it connects. Here is the R/R procedure from AUTOZONE....

  1. Disconnect the negative battery cable.
  2. Relieve the fuel system pressure.
  3. Remove the fuel rail cover.
  4. Remove the fuel rail.
  5. Remove the fuel tube bracket attaching screw, then remove the bracket.
  6. Unfasten the pressure regulator attaching screw and separate the regulator from the fuel rail assembly.
  7. Remove the fuel outlet tube retaining clip, then remove the tube from the pressure regulator.
  8. Remove the pressure regulator inlet and fuel outlet tube O-rings, then discard.
  9. Inspect the filter screen for contamination. If contaminated, replace it with a new one.
To install:
  1. Lubricate the new pressure regulator inlet and outlet tube O-rings with clean engine oil and install.
  2. Install the fuel outlet tube into the regulator and install the retaining clip.
  3. Push the pressure regulator into the fuel rail and install the retaining screw. Tighten the screw to 89 inch lbs. (10 Nm).
  4. Install the fuel tube bracket and retaining screw. Tighten the screw to 44 inch lbs. (5 Nm).
  5. Install the fuel rail assembly.
  6. Connect the negative battery cable.
  7. With the engine off, turn the ignition switch to the ON position for 2 seconds, then turn it to the OFF position for 10 seconds. Again turn it to the ON position and check for fuel leaks.

Hope this helps!

5797065a-7fe8-4256-a906-04404173de14.jpg

Jun 28, 2015 | Pontiac Cars & Trucks

1 Answer

Leak at fuel rail on volvo 960


take a lead from your battery .then reach under the inlet manifold. remove the 10mm bolt and copper washers one each side of that bolt. that is the feed line from your fuel rail to the cold start injector .now remove each of the ten mil bolts holding on your fuel rail . now remove the clips holding the injectors to your fuel rail. place some clothes under the fuel rail and lift off . care needed due to fuel wear eye protection due to fuel pressure..

Dec 01, 2013 | 1995 Volvo 960

1 Answer

Replacing a fuel injector on a 2002 volkswagen jetta


To replace the fuel injectors,first the fuel pressure needs to be relieved, then remove engine appearance cover.Then remove air cleaner and air cleaner ducting.Then comes vacuum hoses,remove the hoses and electrical connectors that prevent you from accessing the fuel rail. Disconnect the fuel send and return lines and unplug the electrical connectors for the fuel injectors. -------- You will need socket wrench to relieve fuel pressure and to remove bolts on fuel rail. Complete fuel rail assembly will come out with injectors,then you will have to remove injectors from fuel rail. -------- With new fuel injectors use new O-ring.Don't use old O-ring,use new O-ring. ---------- This will help.Thanks.Helpmech.

Oct 06, 2011 | 2002 Volkswagen Jetta TDI

2 Answers

I need to access the fuel injectors in my 98 wrangler, but i dont know how to get to them


FIRST NEED TO RELIEF FUEL PRESSURE REMOVE GAS CAP RELIEF GAS PRESSURE IN FUEL TANK.THEN REMOVE FUEL PUMP RELAY THEN START ENGINE UNTIL IT DIES LACK OF FUEL,CRANK ENGINE OVER FEW MORE TIMES MAKE SURE FUEL OUT OF FUEL LINES. THEN YOU NEED TO REMOVE AIR CLEANER CROSS OVER TUBE ABOVE FUEL RAILS. DISCONNECT LINES AT THE ENDS OF THE FUELS RAILS ASSEMBLY. MARK AND DISCONNECT THE FUEL INJECTOR WIRE HARNESS CONNECTORS. REMOVE THE FUEL RAIL RETAINING BOLTS, DISCONNECT THE VACUUM LINE FROM THE FUEL PRESSURE REGULATOR. REMOVE THE FUEL RAIL ASSEMBLY FROM THE ENGINE. IF YOU HAVE AUTOMATIC TRANSMISSION REMOVE THE THROTTLE PRESSURE CABLE AND BRACKET TO REMOVE THE FUEL RAIL ASSEMBLY.TO REMOVE FUEL INJECTORS JUST REMOVE CLIPS THAT RETAIN FUEL INJECTORS IN FUEL RAIL. BESURE GO TO DEALERSHIP BUY NEW FUEL INJECTORS O - RINGS.APPLY A SMALL AMOUNT OF ENGINE OIL TO THE O - RINGS TO AID IN INSTALLATION. TORQUE FUEL RAIL BOLTS TO 100 INCH LBS.

Jun 19, 2011 | 1998 Jeep Wrangler

1 Answer

How to replace fuel pressure regulating valve


1991-94 Models - REMOVAL & INSTALLATION
  1. Remove the air intake tube and resonator assembly.
  2. Properly relieve the fuel system pressure.
  3. Remove the bolts from the fuel line clip.
  4. Using a 15 / 16 in. (24mm) backup wrench to prevent damage to the inlet port and bracket, disconnect the fuel inlet and return lines from the pressure regulator/fuel rail assembly.
If difficulty is encountered accessing the fuel return line nut, loosen and/or remove the fuel supply and rail attachment fasteners.
  1. Disengage the fuel pressure regulator vacuum hose.
zjlimited_1134.jpg

Fig. 6: Disengage the fuel pressure regulator vacuum hose

zjlimited_1135.jpg

Fig. 7: Use a suitable wrench to loosen ...

  1. Remove the regulator assembly attaching screw, then remove the regulator assembly. Plug the regulator port in the fuel rail with a clean rag to prevent system contamination.
zjlimited_1136.jpg

Fig. 8: ... and remove the mounting screw from the pressure regulator/fuel rail assembly

zjlimited_1137.jpg

Fig. 9: Remove the fuel pressure regulator assembly from the fuel rail
  1. Do not remove the O-ring from the retainer in the pressure regulator fuel outlet, unless it is damaged and requires replacing. Always remove and discard the O-ring from the fuel inlet.
To install:
  1. Lubricate the new fuel inlet O-ring and, if necessary, the new outlet O-ring with clean engine oil, then install the O-ring(s) in the pressure regulator assembly.
  2. Position the regulator assembly to the fuel rail. Coat the threads of the attaching bolt with Loctite® 242 or an equivalent threadlock, then install the bolt and tighten to 106 inch lbs. (12 Nm).
  3. Connect the fuel pressure regulator vacuum hose.
  4. Connect the fuel inlet and return lines, then tighten the lines to 133 inch lbs. (15 Nm) using a backup wrench to prevent port damage.
  5. Cycle the ignition switch to prime the fuel system, then start the engine and check for fuel leaks.
  6. Turn the ignition OFF and install the air intake tube and resonator assembly.

Hope this helps (remember to rate and comment this answer).

Apr 29, 2011 | 1993 Saturn SL2

1 Answer

Fuel injector reeplacement


you don`t say what motor is in this so here is a basic procedure, find the fuel rail where the fuel lines connect to at the intake manifold.disconnect the fuel lines(be carefull you could get gas in your eyes from fuel spray or start a fire due to hot engine)these lines have high pressure fuel in them.look at the fuel rails to see what all is in the way to remove them and remove interferance items.remove the bolts that hold the rails to the intake manifold,gently lift wiggle the fuel rails and you may have to pry up on the rails in places to get them to come out with the injectors attached the rails.you should make sure any debris is removed from around the injectors so no dirt falls into the injector holes before you remove.then you can remove the injector to rail lock clips and remove the injectors from the rails.clean areas were the injectors will be going apply either gas or silicone on the injector O rings then install injectors to rail install lock clips and reassemble.replace all the O rings as they get dried out brittle and crack or split.re-install removed components start car and check for fuel leaks.

Mar 02, 2011 | 1998 Oldsmobile Silhouette

1 Answer

I need to replace de fuel presurre sensor in a pontiac montana ,do i have to just replace the sensor ,o the sensor came with the fuel pump?thank you


Replacing the fuel pressure regulator, involves just replacing the regulator at the end of the fuel rail in the engine compartment, but fuel pressure sensor - does this mini-van have a fuel pressure sensor?
replacing the fuel pressure regulator: (1) locate it at the end of the fuel rail in the engine compartment,
(2) relieve fuel system pressure (3) disconnect fuel pressure regulator vacuum line. (4) remove fuel pressure regulator retaining screw (retain for re-use (5) using a shop towel to catch spilled fuel, lift & twist Fuel pressure regulator to remove it from the fuel rail. (6) remove/discard retainer and spacer bracket from the fuel rail. (7) remove fuel pressure regulator from the engine fuel return pipe. (8) remove/discard Fuel Pressure Regulator inlet O-ring (9) Check Fuel Pressure Regulator filter screen for contamination - if contaminated, replace Fuel Pressure Regulator. (10) Lubricate new Fuel Pressure Regulator inlet O-ring with clean engine oil & install onto the Fuel Pressure Regulator inlet. (11) Install the fuel return pipe onto the Fuel Pressure regulator (12) Install new retainer & spacer bracket into the slot on the fuel rail.
(13) Install Fuel Pressure Regulator onto Fuel Rail & tighten Engine Fuel Return Pipe nut to 13 ft-lbs (17 Nm). (14) connect Fuel Pressure Regulator vacuum line, (15) Install Fuel Pressure Regulator attachng screw & tighten to 76 in-lbs (8.5 Nm). (16) Inspect & verify that retainer & spacer bracket is engaged in the slots on the fuel rail. Grasp & pull on the Fuel Pressure Regulator.
to ensure that the Fuel Pressure Regulator is properly seated. (17) inspect for fuel leaks with this
procedure: On 2sec,(holy rollers), off 10sec will be left on, inspect for leaks while running.

Dec 11, 2010 | 2000 Pontiac Montana

1 Answer

Bad fuel infector on #1 cyl. Do I have to pull fuel rail or just remove phillips head screws on injector and replace . I know I have to take pressure off fuel rails.


YEP YOU HAVE TO REMOVE FUEL RAIL TO REPLACE FUEL INJECTOR AND NEED A NEW O - RING ALSO.YOU HAVE TO GET NEW O - RING AT NISSAN DEALERSHIP.

Sep 08, 2010 | 1995 Nissan Maxima

1 Answer

How do i get to feul injectors


YOU HAVE TO RELIEVE FUEL SYSTEM PRESSURE.REMOVE THE INTAKE MANIFOLD COLLECTOR.REMOVE VACUUM HOSE FROM THE FUEL PRESSURE REGULATOR.REMOVE FUEL HOSES FROM THE FUEL RAIL.REMOVE FUEL RAIL BOLTS AND INJECTOR HARNESS CONNECTORS.REMOVE INJECTORS AND FUEL RAIL AS AN ASSEMBLY.REMOVE INJECTORS FROM RAIL BY PUSHING THEM OUT.REMOVE DISCARD FUEL INJECTORS ORINGS REPLACE WITH NEW ORINGS LUBRICATE NEW ORINGS WITH CLEAN ENGINE OIL.YOU HAVE TO BUY ORINGS FOR FUEL INJECTORS AT THE DEALERSHIP.BESURE TO TAKE OLD ORINGS SO WILL GET THE RIGHT SIZE ORINGS.

Mar 20, 2010 | 1997 Infiniti.5 J30

Not finding what you are looking for?
1992 Chrysler Imperial Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...