Question about Chevrolet Cars & Trucks

2 Answers

My 01chevy won't come out of park an my break light won't work but all other light work

Posted by Anonymous on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,527 Answers

It could be the brake switch at the brake pedal if the brake lights wore the only problem and still could be a part of the problem .
However you say you can't shift into park .Your foot needs to be on the brake to shift P and R can you shift from R to N and then other gears with out your foot on the brake pedal .
Unplug the brake switch connecter at the pedal hook a test light or ohm meter to the pins then push the pedal dose the circuit open and close on off like a light switch all you need is the hot pin ground hook to the pedal if it opens and closes its likely working
Their is another switch on the side of the transmission called the P N R selector witch runs through a switch called the interlock switch all controlled by by the shift cable all moving parts .
You didn't say what specific vehicle you have but it sounds like a 4 WD vehicle to have this issue .
Don't panic read the manuals and think it through .

Posted on May 02, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 21,873 Answers

Usually a sign the brake switch is faulty.
You may be able to shift out of park by turning the key switch to the unlock position but not to the on position. Then crank it in neutral.

Posted on May 01, 2015

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: When I hit the break peddle, the break lights won't come on

there is eather a swich under the dash that is out or there could be a fuse thats blown.

Posted on Sep 04, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My dash lights work but my tail lights do not. They are on the same fuse and the bulbs are good. What's the problem.


It sounds like you might have a break in the wiring going to the tail lights. Does your parking lights up front work? If they are out too, then the problem is with the park light circuit. Check for a blown fuse that says "Park" in your owner's manual to make sure that your dash lights are indeed on the same fuse. Otherwise it sounds like you have a break or corroded connector going to the tail lights.

May 17, 2016 | Cars & Trucks

1 Answer

Cruise control


After checking your fuses, are there any other lights on your dash, ex. ABS park break?

Jul 02, 2013 | Cars & Trucks

1 Answer

2003 Ford Fiesta, Parking lights come on when break is applied


Check for dual filament lamps installed backwards and wrong type of lamps installed

Feb 26, 2013 | 2003 Ford Freestyle

1 Answer

The parking break won't disengage on my Lincoln Ls 2003.


Try checking the fuse for the parking brake. If that doesn't work check the ground meaning you might have to remove the cover were the parking brake button is. If that's not it you have to have someone check the parking brake cable which is located behind the brake caliper in the rear of the vehicle. Sorry for the long novel just giving you the most common things before it drives you crazy. Hope it helps if anything just post again and ill b glad to help you again. Thanks good luck.

Feb 24, 2013 | Cars & Trucks

1 Answer

When I hit the break peddle, the break lights won't come on


there is eather a swich under the dash that is out or there could be a fuse thats blown.

Sep 04, 2012 | 2004 Dodge Neon

1 Answer

Key won;t go into ignation on my 2002 buick park ave


It is possible that the tumblers in the ignition need lubrication. I had this problem with a boat ignition. Spray a small amount of break free, or WD 40 or graphite penetrating oil into the slot and slowly work the key gently into it. A drop of oil in the slots of the key won't hurt.

Jul 25, 2012 | 2002 Buick Park Avenue

1 Answer

Where is the tag light fuse on a 1989 chevy c150


its in the same system as your parking lights when your parking lights tern on they illuminate the licence plate lights if fuse isnt blown parking lights work then check for trailer wireing harnes if ther is one you may have a break in the light circuit if fuse is blown and parking lights dont work then its a deffinet break in the curcuit

Jul 23, 2012 | 1989 Chevrolet C1500

1 Answer

Montana parking break won't release


does it have the lever or pedal for the parking brakes!!

Nov 27, 2011 | 2004 Pontiac Montana

2 Answers

I need a FREE 1992 Toyota Camry taillight wiring diagram. My side rear park lights come on but my park lights that work with the brake lights don't. I changed the bulbs and tested everything. I narrowed it...


brown wire is your park LT yellow Left-turn green right-turn. Now the break light my be on it own wire it is red black is ground. but if you have a test light see if the brown wire turns on the test LT when you turn on the park LT or what wire light up when you step on the break pedal. and so on.

Feb 25, 2010 | 1992 Toyota Camry V6

1 Answer

Parking break light is always on (1994 Toyota Previa)


If you look where the parking brake arm is you should se a switch that it pushes against . The switch should be right above the parking brake arm .

Feb 23, 2009 | 1994 Toyota Previa

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...