Question about 2003 Hyundai Santa Fe

1 Answer

Odb code p1192 santa fe2003 3.5 mechanic told me to replace whole throttle system.

Here how it started , i had antifreeze leak , i fixed the hose and leak stopped , for some reason i detached TPS sensor , I cleaned throttle with spray , i put everything back in order , turns out i incorrectly attached TPS back.

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 60 Answers

TPS (Throttle Position Sensor) Diagnosis and Unde…: http://youtu.be/FJobCD6y8fk maybe this will help you http://www.hyundai-forums.com/sm-2001-2006-santa-fe/372690-p1192-code-help.html#/forumsite/20503/topics/372690 from what i understand iif itis your tps malfunctioning it will need to be rwplaced

Posted on May 15, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
motor1258
  • 6674 Answers

SOURCE: 2002 Sonata TPS wiring scheme

Try here, you may have to search a bit but, ..

( http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280194b55 )

Posted on Dec 20, 2008

StormStrikes
  • 104 Answers

SOURCE: p1128 code on 2000 hyuandai accent

I did some research because the P1128 is an odd code for Hyundai and I couldnt find a lot of information on it, but I found two things that may help and neither point to the fuel pump.

1. P1128 in Hyundai refers to the Mass Airflow Sensor or MAF being defective.
2. There is a TSB from Hyundai, TSB 01-36-022, but I wasnt able to ascertain if that was a specific TSB for the MAF or if it was information on how to test the MAF or some other information.

P1124 seems to be a related code as well but I could find little on it. P1124 in a Subaru is an issue with the Throttle Position Sensor or TPS, but I could not confirm that for Hyundai.

My first suggestion would be to check your air filter and if it has not been changed in a while or is really dirty, then change it as a restriction in air flow might be mistaken by the computer as a problem with the MAF.

Posted on Jan 02, 2009

doin12volt
  • 233 Answers

SOURCE: Replacing a throttle position sensor

Hi, 
  A sensor like TPS is very easy to change. It is located on the Throttle body. (the part that is at the opposite end of the air intake tube from the air box/ filter) The throttle body looks sort of like a small carburetor, if you look on the side of it you wil see a black sensor.. this is the  TPS. It is usually held on by two or three screws and it will have an electrical plug as well.

Posted on Jan 13, 2009

  • 12 Answers

SOURCE: Throttle Sensor after throttle position sensor?

could be a false code problem could another senser and the computer is blamming the tps make sure he checks it with a meter before replacing it if not he will replace two parts at your expence

Posted on Mar 24, 2009

  • 299 Answers

SOURCE: Replaced 0xygen sensor in 2003 Hyundai Accent 3 Times Not Fixed!

It sounds like you have either a lean or rich condition ocurring,could be exuast leak,vac leak,leaking fuel preasure regulator,cat convertor.At this point would go to dealer for diagnosis.

Posted on Jun 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 GMC W35042 TROUBLE CODE P1192


what sort of a truck is this ?
W35042 confuses me
diesel or petrol

mess of problems

throttle
http://www.engine-codes.com/p1192.html

fuel injectors
http://obdii.pro/en/code/P1146


trans axle/transmission
http://www.engine-codes.com/p0700_gmc.html




26309679-eqpognyxwb4jkumc2nrzorbv-5-0.jpg

Oct 13, 2016 | GMC Cars & Trucks

1 Answer

I hav a 98 Malibu Was idleing funny change the tps didnt fix it now when driveing it acts like it wants to die but when i stop it dies still acts like the idleing is still offf


There are a few things you can check for, 1. the idle air control valve for carbon and the same for the throttle plate having varnish or carbon build-up . Use spray carb. cleaner if any of these are black with carbon.2. A dirty mass air flow sensor will cause stalling and Idle problems . You can get cleaner just for mass air flow sensors ,don't use carb.clean ,or brake clean ! Or you could possibly have a vacuum leak ! check all vacuum hose , you can spray carb cleaner at intake gaskets to check for leaks , but be careful it is flammable !!!
Vacuum Leak Checking With Choke Cleaner COLD ENGINE look at this video

Dec 09, 2014 | Cars & Trucks

1 Answer

Crown vic police interceptor 2003 when i start the motor, it runs about 2000rpm by itself. I understand some of electronics. So i changed the tps sensor but didnt fix the problem. Neither the fuel pump,...


Always start with the simple stuff.. look for vacuum leaks. look at accel cable attached to the throttle body.. is it stuck holding the throttle plate open? The big Vac hose from the intake manifold to the brake booster? . remove the big air hose from the airfilter to the throttle body check the throttle plate.. and clean the mass air.. special spray cleaner at auto parts store. Did this just happen or did you change something.. DID YOU INSTALL THE TPS WITH THE HOSE ON AND COULD NOT SEE THE THROTTLE PLATE POSITION?.

May 25, 2014 | Cars & Trucks

1 Answer

Hi my Saab 2001 93 2.0 turbo convertible has lost power get into limp home mode I reset it every few weeks codes come up p1105 p1260 p1251 p 1264 what do u think is wrong ?


code p1105 refers to manifold absolute pressure(MAP) sensor, TC system-leak detected. causes ---intake leak, ---hoses There are to references to p1105 The second response is still map sensor but the causes are---TC system--mechanical fault--air leak between throttle body-TC,map sensor---TC system--exhaust blockage
code p1260 refers to throttle return spring--weak spring force. causes ---mechanical fault,--,throttle control unit
code p1264 refers to throttle valve opening-accelerator released causes ---throttle control unit---mechanical fault

Mar 28, 2013 | 2001 Saab 9-3

1 Answer

2006 ford ranger stalling 100,000 miles, changed out tps sensor, fuel filter , plug wires, air filter, cleaned throttle body and map sensor and sensor on top of intake manifold; stalls when pulling up to...


check or replace pcv valve. check the hose also. remove and clean the idle air control with carb cleaner ( IAC ). they are usually located on or around the throttle body. check all hoses for a vacuum leak. good-day!

Aug 10, 2011 | 2006 Ford Ranger

1 Answer

My Santa Fe loses exceleration and when diagnosed got code p2135. I was told there was a recall by hyundai for this. Is this right


Thanks for the inquiry.
P2135:
Throttle/Pedal Position Sensor/Switch "A"/"B" Voltage Correlation
P2106:
Throttle Actuator Control System - Forced Limited Power
I would replace the throttle pedal position sensor

Best regards,
TF


Jun 03, 2011 | 2007 Hyundai Santa Fe Limited

1 Answer

Wont go faster than 20 mph. could it be a vaccum leak


Get the spark plugs and fuel filter checked.If the plugs are fouled or fuel filter is got clogged, then such problem can occur.Other possibility is catalitic convertor is totally clogged. This can happen suddenly.Try cleaning this parts and check.If that makes any difference.----- If still the problem, then check the IAC valve and tps sensor.First clean both sensor and valve.Also get the throttle body checked.Both iac valve and tps sensor located on throttle body.You can use throttle cleaner to clean this part and check.If still the same problem, then yes it can be the vacuum line issue.The vacuum hose in engine compartment is loose or vacuum line is leaking.And causing this problem---------- Getting this possibilities checked will help to confirm the problem.Thanks.Helpmech,'

Mar 25, 2011 | 1997 Volkswagen Jetta

1 Answer

2000 mercury mountaineer 5.0 idel roung at idel at higher rpms runs fine


Air Filter-clean or replace
Clean MAF Sensor--CRC MAF Cleaner
Clean throttle plate-CRC Throttle Body Cleaner
Spark Plugs- replace every 70,000 miles
Check -for vacuum leaks on ALL ducting and hoses
Replace front 2- O2 Sensors-ones closest to motor ,every 100,000 miles

Have TPS Sensor --tested with an oscilloscope for opens

Mar 06, 2011 | 2000 Mercury Mountaineer

3 Answers

Engine surging only in park


three most common reasons (in order)-vacuum leak (look for a disconnected hose), throttle position sensor (it can cause idle issues) and the throttle position sensor (they get dirty and can be cleaned but be careful to keep solvents away from delicate electronics)-I hope this helps - rate my answer to let me know and to help others with the same problem

Feb 05, 2011 | 1990 Toyota Camry

Not finding what you are looking for?
2003 Hyundai Santa Fe Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...