Question about 2006 Buick Lucerne
What is the easiest access to the bulb for replacement?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I just Replaced a Low Beam Light bulb on a 2005 Buick La Sabre.
If You use a Metric socket and Remove the Two Silver bolts Attaching the headlight Assemble onto the metal surrounding the the lamp assembly it comes out to the front. This makes it much easier to access the bulb. Twist it counerclockwise & it comes out by pulling gently on the bulb. Then by realeasing a tab that is the socket holder bulb can be removed & replaced with a New #9006 low beam halogen light bulb. Wrap a Paper towel around the bulb & do NOT touch it with your bare hand as this wiil ruin a halogen bulb,
Posted on Jul 23, 2009
Hello. I happen to own a '99 and had to do the same. You can access the back of the bulb by removing your air filter and hose. This will free up room for you to reach the bulb.
Posted on Nov 01, 2009
Some of these, the headlight housing comes out, usually 2 thumbscrews that are easily removed to access the housing. Tools usually are not needed,
Posted on Nov 24, 2009
The bright light fitting is the same as the dim so take it apart fist to see how the cover screws off/on and the light comes out. Both the cover and the bulb are removed by a standard twist to the counterclockwise and replaced by a twist to the clockwise. Now to the dim light. You have to release the entire light assembly before you can remove the screw-on cover to reach the light. On the rear edge of the light unit closest to the engine is a white locking tab. Pull that tab up just to the point where it releases…pull too far and it locks again. Next, locate the other locking bracket which is a metal bracket in the center-rear of the light assembly. This bracket is held down by a screw. Remove the screw with a 10mm wrench. Lift the bracket just like you did the white bracket. You should now be able to pull (or pry) the entire light unit forward a little. Depending on the size of your hands this might be enough. If not, then you need to release the plastic bumper assembly to give you a little more space. This is done by removing two expansion locking pins, one that holds the little plastic strip down between the bright and dim lights and one that is located inside a rubber bumper on the engine side of the light unit. To remove these locking pins, pull or pry up the little tab in the center of the pin just like you were pulling a nail by the head. That should give you a little more space.
Posted on Apr 03, 2010
Tips for a great answer:
Aug 29, 2015 | 2006 Buick Lucerne
Aug 21, 2015 | 2006 Buick Lucerne
Aug 08, 2015 | 2007 Buick Lucerne
Jul 15, 2015 | Cars & Trucks
May 01, 2015 | 2006 Buick Lucerne
Nov 18, 2014 | 2006 Buick Lucerne CX
Feb 15, 2010 | 2006 Buick Lucerne
Dec 28, 2009 | 2006 Buick Lucerne
Mar 11, 2009 | 2006 Buick Lucerne
73 people viewed this question
Usually answered in minutes!