Question about 2004 Kia Amanti

2 Answers

My car cranks but won't start a P0102 code came up for the mass air flow sensor I replaced it and now it still just cranks with the code coming up still can this cause it not start?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 371 Answers

Replace the CKP (Crankshaft Position) Sensor. Your car cannot tell that you are trying to start it, because it does not see RPM's from CKP sensor. Common problem.

Posted on May 02, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Kia Master
  • 1,144 Answers
Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is causing recurrent DTC P0102?


code p 0102 refers to mass air flow (MAF) sensor/volume air flow(VAF) sensor--low input===causes ---wiring short to ground--MAF/VAF sensor---ecm
check the wiring to the unit--plug connection

Mar 31, 2016 | 1996 Volvo 850

1 Answer

Code p0102 in a 2001 Cadillac sts Seville northstar engine wat does it mean


Code p0102, according to:

P0102 Cadillac Mass or Volume Air Flow Circuit Low Input

is "Mass or Volume air Flow Circuit Low Input"
Means that the computer isn't getting enough signal from your MAF sensor.

Check the link above for more information. MAF replacement isn't difficult.

Jul 10, 2015 | Cadillac Cars & Trucks

1 Answer

2008 Chevy Kodiak c4500 duramax desiel code reader (Innova 3100 Can OBD2) shows P0102, what does it mean


P0102 Chevrolet - Mass or Volume Air Flow Circuit Low Input

Read more: http://engine-codes.com/p0102_chevrolet.html#ixzz38p5k1ZD8

Possible causes - Faulty mass air flow sensor
- Intake air leaks
- Dirty mass air flow sensor
- Dirty mass air filter
- Mass air flow sensor harness is open or shorted
- Mass air flow sensor circuit poor electrical connection

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor.


Read more: http://engine-codes.com/p0102_chevrolet.html#ixzz38p5tpWZk

Jul 28, 2014 | Cars & Trucks

1 Answer

Mazda 3 won't idle.


code p0 refers to intake air temp sensor --circuit malfunstion causes are wiring open circuit(broken)wiring short to ground bad earth and ECM.
code po113 refers to mass air flow( MAF) sensor/ volume air flow (VAF) sensor --low input. Causes may bewiring short to ground MAF?VAF sensor faulty ECM
code po327 refers to Knock sensor (KS) bank 1--low input. Cause may be insecure (loose) KS poor connection- wiring ---short to ground incorrectkly tensioned KS and ECM

Mar 10, 2013 | Cars & Trucks

1 Answer

Volvo V70 code P0102


that means you have a mass air flow sensor problem located on air intake first try cleaning it be real gentle when cleaning ok thhey sell electrical spray cleaner at auto parts use that then clear the code auto zone can do that for free drive car if it comes back then replace the mass air flow sensor ok let me know

Nov 20, 2012 | 1998 Volvo V70

1 Answer

Where are the O2 sensors? I found one directly behing the spark plugs on the back.


The O2 sensor (2 on V engines) are in the exhaust system pipes before the catalytic converter, the next sensor is the efficiency monitor for the catalytic converter system it looks like a O2 sensor but performs a much different function as far as testing goes. The codes you have follow.

P0420 - Catalyst System Efficiency Below Threshold Bank 1
What does this mean? In most cases it means the catalytic converter is worn out and that is sensed by the catalyst monitor I spoke of earlier.

P0102 - Mass or Volume Air Flow Circuit Low Input
Faulty mass air flow sensor
- Dirty mass air flow sensor (located in the air intake hose to the engine from the air cleaner)
- Dirty air filter
- Mass air flow sensor harness is open or shorted
- Mass air flow sensor electrical circuit poor connection
- Intake air leaks

Nov 02, 2012 | 2003 Buick LeSabre

1 Answer

2000 nissan sentra 2.0 error codes p0101& p0102


P0102 - Mass Air Flow Sensor Circuit Malfunction

The mass air flownissan-maxima-maf-sensor.jpg or MAF sensor is placed in the intake air duct between the air filter and the engine intake manifold. The MAF sensor measures the amount of intake air flow. The MAF sensor converts the air flow measurement into a voltage or frequency signal, with the voltage or frequency changing proportionally to the amount of air flow. The air flow sensor signal is monitored by the engine computer (ECM). The engine computer (ECM) uses the mass air flow signal to know the engine load and to calculate the proper amount of fuel injected. If the signal from the mass air flow sensor is out of expected range, the ECM detects a fault and sets the code P0100. For example, the mass air flow sensor signal could be higher than expected when the engine is not running or lower than expected with the engine running. A car with the code P0100 may have some driveability issues, such as stalling, lack of power, surging, hesitation, etc. In some cars, the code P0100 can cause the fail-safe mode where the engine speed would be limited to 2,500 - 3,000 rpm.
If there are other trouble codes present, they might need to be looked at first. Checking the freeze frame may help, as it may contain some important information. The freeze frame is a snapshot of the engine parameters at the moment when the fault was detected. The freeze-frame may show whether the vehicle was running or stopped, whether the air-fuel ratio was lean or rich, was the engine was cold or warmed up at the time of the malfunction. Read more about the freeze frame.


Read more about mass air flow sensor.

What could cause the code P0100:
- faulty or contaminated mass air flow sensor
- open or short in the mass air flow sensor electrical circuit
- open or short in the sensor power or ground circuit

- other electrical problem with the MAF sensor wiring, (corroded wires, bent terminals, bad ground connection, burned fuse, etc.
- vacuum leaks
- restricted air flow at or before the air filter
- wrong air flow sensor installed
- problem with ECM





P0102 - Mass Air Flow Sensor Circuit Low

The mass air flow or MAF sensor measures the amount of air entering the engine. The engine computer (ECM) uses the mass air flow signal to calculate the amount of fuel injected (read more how the MAF sensor works below). The code P0102 is set when the signal from the mass air flow sensor is lower than expected. Often a car may exhibit some driveability symptoms, such as lack of power, surging, hesitation on acceleration, hard starting, pinging (detonation), or rough idle when started cold. Often the codes P0171 or P0174 could also be stored along with the code P0102, as the incorrect air flow signal can cause the engine to run lean. The codes P0171 and P0174 indicate a lean condition. Checking the freeze frame might help in the diagnostic process. The freeze frame is stored in the ECM along with the trouble code. The freeze frame contains some recorded parameters (e.g. vehicle speed, engine temperature, fuel trim) at the moment when the fault was detected. The freeze frame can also be accessed with a scan tool.



What could cause the code P0102
- faulty or contaminated mass airflow sensor
- debris blocking the air flow at the mass air flow sensor
- unmetered air leaking past the MAF sensor (vacuum leaks)
- PCV system vacuum leaks
- restricted or collapsed intake air duct
- dirty or restricted air filter
- restricted air screen before the air filter
- improper application of aftermarket components (e.g. cold intake, modified air filter, etc.)
- wrong air flow sensor installed
- electrical problem with the MAF sensor wiring, connector, power supply or ground.
- problem with ECM
- in some cases other issues with the fuel injection system like a clogged catalytic converter or a faulty manifold absolute pressure sensor (MAP) can also cause the code P0102.




Solution for MAF repair

Oct 20, 2012 | 2006 Kia Sorento

1 Answer

2003 Grand Am Has P0102


It is not an ECM/PCM problem.
P0102 - Mass or Volume Air Flow Circuit Low Input
Possible causes- Faulty mass air flow sensor
- Dirty mass air flow sensor
- Dirty air filter
- Mass air flow sensor harness is open or shorted
- Mass air flow sensor electrical circuit poor connection
- Intake air leaks Tech notes Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor

Sep 27, 2012 | 2003 Pontiac Grand Am

2 Answers

Buick regal 2002 gs...when i stop at a light the engine just quits.I put it in neutral and it will start right up again....This happens about 4/5 times a week. i .replace the crank sensor. but .check...


P0100 - Mass Air Flow (MAF) Circuit Malfunction

Basically this means that there is a problem with the Mass Air Flow (MAF) sensor or circuit. Other MAF sensor circuit DTC trouble codes are P0101, P0102, P0103, and P0104.

Symptoms:
You will likely not notice any serious drivability problems, although there may be symptoms such as a general decrease in power or sluggishness.

Causes: A code P0100 may mean that one or more of the following has happened:
* The MAF may be disconnected, or a wiring connection may be bad
* The MAF sensor may be faulty

Possible Solutions: The simplest thing to do is to reset the code and see if it comes back. Then start with the cheapest, easiest repair procedures:
* Verify that the Mass Air Flow Sensor wiring is connected properly and that there are no broken / frayed wires.
* Unplug and reconnect the MAF wiring harness
* Check the voltage of the MAF sensor (refer to a repair manual for vehicle specific information)
* Replace the MAF sensor

Then, like a reference guide check this TSB DTC P0102 MAF and this article about Mass Air Flow sensor, what does it do and how it does it.
Test, check it and keep us updated.

May 27, 2011 | 2002 Buick Regal

2 Answers

MAP sensor output voltage too low?


poor start, very poor gas millage

Jul 31, 2009 | 1993 Mitsubishi Mirage

Not finding what you are looking for?
2004 Kia Amanti Logo

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...