Question about 2004 Kia Amanti

2 Answers

Cranks but won't start but a Po102 code for MAS came up I changed it but car stills just cranks but no start and the same code still comes up is there anyone that can help me?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

Yes, change the crank sensor. The timing belt may need to come off as well.

Posted on May 04, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 371 Answers

Change the CKP sensor.

Posted on May 02, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 94 fors Taurus cuts out while driving and sometimes will not start. It cranks but won't start. We changed the fuel pump, spark plugs and distributor cap, but it is still cutting out while driving...


are there any codes? have you checked the pressure in the fuel line. you may have a bad fuel pressure regulator. or a bad crank position sensor. spray starter in the throttle body and see if it starts

Dec 14, 2012 | Cars & Trucks

1 Answer

My 1996 Taurus sho cranks but won'tstart up change


Try replacing the camshaft position sensor usually solves the problem.

Jul 03, 2012 | Cars & Trucks

1 Answer

97 gmc jimmy cranks but won't start, have replaced everything possible but still won't start, most of the time the brake lights won't work, or the gauges goes crazy. I have changed relays,...


There are two basic reasons for not starting - no spark or no fuel, both of which are controlled by the ECM. You need to check error codes and these items - for the spark, test it at the cylinder 1 sparkplug; for the fuel check the pressure (if too high or low, problem!).

Aug 28, 2017 | 1997 GMC Jimmy

1 Answer

Won't start


remove the fuel inlet pipe suction till fuel comes. than crank the engine .once the fuel comes out ,connect the pipe. next remove the out-let pipe and crank the engine till fuel comes out.and also check the fitting at suction for any leakage,breakages etc...

Feb 29, 2012 | 1995 Ford Explorer

1 Answer

2002 saturn sl won't start, turn over but won't start


Done cars have a kill switch if they are low on oil. Check your oil. If the oil is good, it may be the ignition switch.

Jan 01, 2018 | 2002 Saturn Sl

1 Answer

1995 Buick Lasbre 3.8L. Cranks over and wont start. Sometimes will start. Very random. Can drive 1 mile, shop, come out, car won't start just cranks over. Had replaced plugs, wires. Dealership...


If you have not changed the crank sensor,CHANGE IT NOW..Also in warm climates NEVER use fuel with ethanol in it.If it was a anti theft alarm problem,you usually get a light on the dash.

Apr 30, 2017 | 1995 Buick LeSabre

1 Answer

G.M.C. Savana 5.7 cranks Problem with the 1997 Savana G.M.C. Savana 5.7 cranks but will not start. Its getting spark and fuel but still does not start.. Ran fine yesterday. obd2 code came up as po102 map...


I was putting you in a thinking position.
Yes,if you disconnect the MAF-it will not start. Or if the computer has no input or control over airflow,as a result of a defective sensor.

Now, without your vehicle and some testing, I don't know if it is bad.
You suggested it wouldn't matter and would start.
Only replace it ,if you get it tested, and there is a problem. There is nothing you can do, and good luck finding a repair shop, that will do anything but replace it, and hope for the best,at your expense.

Sep 21, 2010 | 2000 GMC Savana

1 Answer

G.M.C. Savana 5.7 cranks but will not start. Its getting spark and fuel but still does not start.. Ran fine yesterday. obd2 code came up as po102 map sensor. I don't think this is the problem. Van should...


Let go with your theory

You get a PO102 MAF code.( Mass Air Flow Sensor)
Lets say the sensor is somehow not working correctly,and as you say,it has spark and fuel

I would guess, you think, the engine would be happy, having no idea how much air it is getting. Kind off like the computer will somehow overlook it is controlling an air pump in the first place.

Sep 21, 2010 | 1997 GMC Savana

Not finding what you are looking for?
2004 Kia Amanti Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

80608 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...