Question about 2010 Chrysler Town and Country

3 Answers

After a oil change how do I reset the computer?

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 2,899 Answers

If you really want the computer reset, it will make the radio disabled, unless you have the radio code.
If so,

Posted on May 01, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Yea just disconnect the battery for 10 mins then put it back on and it should re set

Posted on Jul 14, 2015

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 113 Answers

Unhook bat cabel wate a bit well reset

Posted on May 03, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn of sign ''oil change required''


have you changed your oil? If its new then just reset the computer/ diagnostic screen between your RPM and Speed. Press the screen button until it reads "setup menu, Hold reset" now hold the button until the screen changes again.

press the button until screen reads "system check, hold reset"

press and hold the button. It will start a basic system check,

First check is for oil, it will read the percent of "good oil left" and say "if new, press and hold reset"

thus press and hold reset, and the computer will reset your oil life to 100%.

Oct 16, 2010 | 2006 Ford Explorer

Tip

Pontiac service light 1983-01


Firebird

1998-01

To reset the "CHANGE OIL" light, press and hold the "TRIP/OIL RESET" button on the instrument panel for 12 seconds. When the light flashes and goes out, the system is reset.


Grand Am


1999 -01

To reset the Change Oil light, open the driver's side instrument fuse panel and turn the ignition on. Press the "RESET" button and release. The light will flash. Press the button again and the system will be reset.


Grand Prix


1999-01

Driver Information Center If Equipped). Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three times within five seconds. If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the ignition key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on, repeat the procedure. To reset the OIL LIFE indictor if equipped with a Trip Computer: Press the trip MODE button until the light appears next to OIL LIFE. Press and hold the trip RESET button until the oil life percentage changes to be 99 percent.


Grand Prix


1997-98

To reset the oil life indicator, press the "MODE" button until the light next to "OIL LIFE" is lit. Press and hold "RESET" for 3 seconds until oil life percentage is 100%.


Grand Prix SE


1997

Turn the ignition on, but do not start the vehicle. Within 5 seconds, push the accelerator to the floor 3 times. Turn the ignition off. Start the car and the Change Oil Soon indicator light will be reset.


Grand Prix

w/ Trip Computer

1988-93

To reset "CHANGE OIL", "CHANGE OIL FILTER", or the mileage of either on the Trip Compute, continually press the "SERVICE" or "SYSTEMS CHECK" button until the item appears with the mileage below it. Then press the "RESET" button and the mileage will be reset to the maximum value. If you want to reduce this value, hold the "RESET" button down and the mileage will count down. Release the button at the mileage you would like to observe.


Bonneville,
6000

w/ Driver Information Center

1983-91

To reset "CHANGE OIL SOON" or "OIL FILTER" or to adjust the mileage on the Driver Information Center, continually press the "DIC" button until either message appears with the mileage below it. At this point, hold down the button. In 5 to 10 seconds, the mileage will count down. When it passes 0, it will cycle back to a maximum figure. Release the button when the mileage gets to the service interval you'd like to observe. If "CHANGE OIL" or "OIL FILTER" already appears, just hold the button down to reset the mileage. "CHANGE OIL" and "OIL FILTER" are reset separately.













on Dec 07, 2009 | Pontiac Grand Prix Cars & Trucks

2 Answers

I need to know how to fix the oil change light after a oil change on 2009 mercury grand marque. The panel on the car always says ''change oil soon'' but the oil has already been changed.


Hi!!

The person that changed the oil should have resetted the light.

Just drive to an AutoZone store, ask for somebody to check your vehicle computer codes, once they check them up, ask them to reset the change oil soon light, they would do this at no charge. This is a free service they offered to all their customers.

Don't forget to rate this post. Good luck!!

May 23, 2010 | 2009 Mercury Grand Marquis

2 Answers

How do i reset the oil life on a 2005 gmc c8500


Most often you need a code reader with a reset function that can connect to the computer jack under the dash and reset factory functions like that. Pain in the tush if you are changing your own oil. Mechanics and dealers have the equipment to do that reset.

May 20, 2010 | 2006 Chevrolet Silverado 3500

1 Answer

Oil Change - Computer Reading


Tech did not reset. if you have steering wheel controls scroll thru till you get to oil percent and hold down the reset button this is the arrow looking button. hold til it says oil life reset

Mar 26, 2010 | 2005 Chevrolet Tahoe

2 Answers

The Change Oil (not oil light) in my 2002 Camaro came on less than 10 miles after it left the shop for new brakes, and less than 300 miles since its last oil change. What would cause the change oil light...


If you changed your oil just less than three miles ago, you just need to reset the computer. In this vehicle it may be the same as other chevys. what you will need to do is turn the key to the run position. Depress on the gas pedal three times and turn off the key. this should reset the computer. good Luck

Mar 23, 2010 | 2002 Chevrolet Camaro

3 Answers

How to reset the change oil light for a 2007 lincoln town car. Hitting reset button doesn't do it.


FIRST press and release the setup button to display oil life= xxx
then press and hold the reset button for about 2 sec it should then display oil life set to 100%
--------------------------------
Just pressing the reset button when the change oil light comes on while driving will not reset the computer

Feb 15, 2010 | 2007 Lincoln Town Car Signature Limited...

1 Answer

How to reset computer after oil change on 2008 outlander


How to reset computer after oil change on 2008 outlander

Dec 04, 2009 | Mitsubishi Outlander Cars & Trucks

2 Answers

Engin oil life 50%


How often do you change your oil? Do you change it yourself? look in owners manual it should tell you how to reset your oil change message. Probably reset it through the radio, manual will tell you

Aug 24, 2009 | 2004 GMC Envoy

1 Answer

Change oil light reset?


Hi Shady, here is the procedure for resetting the light.
Resetting Procedure
Follow this procedure to reset the GM Oil Life System™
  1. Turn the ignition to RUN, with the engine off.
  2. Fully press and release the accelerator pedal three times within five seconds.
  3. If the CHANGE OIL SOON light flashes, the system is resetting.
  4. Turn the key to OFF after the light has finished flashing, then start the vehicle.
  5. If the CHANGE OIL SOON light comes back on, the engine oil life system did not reset. Repeat the procedure.
With Trip Computer
  1. Press the MODE button until the light appears next to OIL LIFE.
  2. Press and hold the RESET button for three seconds. The oil life percentage should change to 100 percent.

Nov 02, 2008 | 2002 Pontiac Grand Prix

Not finding what you are looking for?
2010 Chrysler Town and Country Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...