Question about 2003 Saturn VUE

2 Answers

How do I remove the seats to replace carpet? - 2003 Saturn VUE

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Saturn Master
  • 43,003 Answers

Well they unbolt from the floor pan GOOD LUCK

Posted on May 01, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Saturn Master
  • 10,875 Answers

12 years worth of rust under there!! get ready to have to cut the bolts off,better off leaving carpet

Posted on May 01, 2015

  • 1 more comment 
  • ray gallant May 01, 2015

    LOL Johnny we usually cut the carpet to fit and just tear the old out

  •  johnny rebel
    johnny rebel May 01, 2015

    that works too,i just like seeing ppl sweat

  •  johnny rebel
    johnny rebel May 01, 2015

    or cut the wires to the ecm under the seat! lol

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the center console to replace carpet


it has screws.
the FSm covers this, as does alldata.com
some cars the seats must come out.
most just screws.

Oct 12, 2014 | 1989 Toyota Camry

1 Answer

How did you remove the front power seats in 2009 GMC Acadia?


Two bolt behind the rear seat tracks under little covers, the lift up the back of the seat and pull the seat assembly towards the rear, the you have your electrical connectors

Feb 19, 2013 | 2009 GMC Acadia

2 Answers

I want to upgrade the speakers by the back window but want to know how to remove the carpet to get to the speakers.


dont remove the carpet you will have to remove the stock speakers from inside of the trunk

Oct 22, 2010 | 2003 Mitsubishi Galant

1 Answer

How do i install new molded carpet in my 1993 ford probe? i dont know where to cut it or whether i should take out the center console.


New molded replacement carpet, should not require cutting, yes the console will need to be removed, seats too, everything that is above the carpet from side to side and front to back should be removed, then install the new carpet, and re-install everything you took out. Hope this helps, let me know.

Sep 22, 2010 | 1993 Ford Probe

1 Answer

Drivers seat broke loose need to remove to fix


hello there:
for removal of the front seat you will have four bolt that go threw the floor board they will be under the carpet and more than likely will take a large tourq driver to get them out you may also have electrical connection under the seat if you electric seats so make sure you unplug the wire before removing the seat this will give you access to the part that needs to be replaced the bolt should be able to found by lifting the carpet right at the seat mounts in the front and the rear should be visible hope this helps you out sincerely D.Jones

May 30, 2010 | 2000 Jeep Grand Cherokee

1 Answer

I removed my seats to shampoo my carpets in my 1999 323i and after I replaced the seats, the airbag warning light stays on. I have reconnected both seatbelt connectors and need help.


There are wires under the carpet, you might have pinched one re-installing the seat. I have seen this happen with shifter cables also.

Mar 08, 2010 | 1999 BMW 328 Series

1 Answer

Need to replace rear speakers in 1998 deville.... how is this done?


If it is the factory installed speakers.They are come out thru the inside.You need to remove the rear deck carpet...Easiest way is to remove both back seats first .
Remove the bottom seat first by pushing the seat towards the back of the car / then lift it up.
Then you will release the other seat by (using a socket set) to remove 2 nuts inside the trunk.then the seat will be release to simply lift out of the car. remove the top deck carpet .
The speakers are held in by 4 angled clips.
From inside the trunk, release the 4 angled clips,disconnect the speaker wires.Then push the speaker inside the car and your done. Hope this helps.

Feb 22, 2009 | 1998 Cadillac DeVille

1 Answer

I need to replace the front driver's seat in a 95 saturn...


seat frame base is held to floor with four bolts, one in each corner.  Begin by moving seat to the full forward position, remove the two rear seat frame bolts, they may be covered by carpet and plastic trim.  Them move seat to full rear position and remove both front frame bolts, the seat will now be free to remove.  Keep me posted

Jan 06, 2009 | 1995 Saturn Sl

1 Answer

HOw to get into engine to change spug pluggs and leads for Toyota estima 1993


The best thing to do is to purchase a Haynes manual for the Toyota Previa. But to access the spark plug wires and spark plugs you will need to remove the passenger front seat. This requires taking out four bolts on the four corners of the seat. After the seat is removed you need to remove the outside seat support and the jack and jack handle that is located under the seat. Next remove the bolt from the seat belt/shoulder harness. Romove the screws from the side of the carpet keeper strip along the bottom of the door. carefully, using a flat blade screwdriver, pry the plastic carpet strip up carefully disengaging it from the rear strip. Unhook the carpet from the edge of the doorway. Pull the carpet back enough to expose the bolts holding the cover over the engine. Remove all the bolts holding the cover over the engine. This will expose the engine head. remove the three bots holding the black plastic cover over the spark plug wires. This wires can be removed allowing access to the plugs. Be aware these engines use only platinum tipped spark plugs. Good Luck

Nov 21, 2008 | 1993 Toyota Previa

Not finding what you are looking for?
2003 Saturn VUE Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...