Question about 2003 Chrysler PT Cruiser

3 Answers

Disconnect airbag chime 2003 PT Cruiser - 2003 Chrysler PT Cruiser

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Chime &a/bag lite should go off approxemently 6to 8 seconds if not I would take to dealer as that is in the same category as seat belts dealer must repair at no chare to you ,

Posted on Apr 30, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 14,585 Answers

I have never heard a chime for airbags /light. The chime only happens with the door,key, lights,seat belts(which yours isn't part of the air bag system), and check gauges. You have another problem to set the chime.

Posted on May 01, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Chrysler Expert
  • 327 Answers

I honestly do not believe this chime can be shut off as it's part and parcel of the passive restraint system. A Chiltons/Haynes repair manual may have some ideas (i.e. removal of relay, fuse, etc).
I'd buy a newer vehicle (mine's a 1992), but I don't want airbags since I wear glasses. And can't find anyone to disable the airbags on father-in-laws cars that I drive to run him around. Been tempted to ram them with my old pickup to set-off the airbags and then clean-up the mess.

Posted on Apr 30, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: I have a 2003 PT cruiser w/ the check engine

It senses when the engine pings and the computer will adjust the timing accordingly. It is located in the block.

Posted on Jun 26, 2009

  • 2926 Answers

SOURCE: I have a 2003 PT CRUISER MAN TRANS THE KEY WONT

Yes, the tumbler is worn, possibly from a heavy key chain or abnormally frequent stop/starts. Ther amy also be a bad connection in the switch connections itself, that may not require a whole new ignition switch.

Posted on Feb 14, 2010

  • 90 Answers

SOURCE: My airbag light goes on and won't turn off on my

your car has several air bags and quite a few different sensors and such. you will need to have the codes pulled and diagnosed by a qualified technician.

Posted on Mar 23, 2010

agent91
  • 2100 Answers

SOURCE: I have a 04 pt cruiser with airbag light and chime

p1685,,"skim invalid key"
I have no idea what they are talking about, but that is the code.

DTC P1685 is Invalid SKIM Key. The Sentry Key Immobilizer Module (SKIM) is part of the security system and kills the vehicle when a wrong key is used. There may be a problem with your key or the chip reader in the ignition switch. This is something the dealer will need to determine for sure. This code will also be set if someone actually tried to steal the vehicle.


My guesswould beto reset your PCM (unhook bat. and depress brake for 1 min), then try to start the car. If that doesn't work, I guess haul it into a dealership so they can run a diagnostic quote.gif

I got this from another site, check it out.

Posted on Aug 07, 2010

  • 78 Answers

SOURCE: how to disable the airbag light on 20006 pt

Hey,
take a look at www.airbagmodul.com

They're working in Airbag-Simulators and Occupancy Sensor-Simulators.

Regards

Gerrit

Posted on Aug 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My airbag light on the driver side goes off and on and chimes every few seconds on my 2007 Pt Cruiser. I'm afraid if I drive it with this happening my airbag will deploy on me.


The warning light means that a fault has occurred in the Airbag system (known as the "SRS" system), when this light is on the SRS system is disabled, so no the Airbag can't go off because the controller module has turned it off completely. Get it fixed ASAP because right now if you have an accident your SRS system will not work (Airbags will not deploy) to save you from injury.

Jul 15, 2016 | Cars & Trucks

1 Answer

Seat belt chime will not stop going off even after i am buckled up


disconnect that sucker from under the seat. Look under the seat ( move it all the way forward it will easier) find the seat belt buckle there will be a wire coming off it. follow the wire to the connection then disconnect it. no more chime. or light on the dash either

Oct 10, 2015 | 2006 Chrysler PT Cruiser

1 Answer

My airbag light and dinger goes off every few minutes in my PT Cruiser. How can I get it to stop?


you have a airbag sensor somewhere. you cant do it yourself, because it could cause all airbags to go off. take it to a place and tell them you have a bad airbag sensor

Aug 10, 2013 | 2009 Chrysler PT Cruiser

1 Answer

Engine codes po325 po442 and air bag light


Determine what the code descriptions of errors are. Then check and replace as needed.
Airbag light indicates problem with airbag system. You must visit the dealer to have analyzed and diagnoses given. Do not attemp to fix yourself. The airbag system, can cause severe injury or death.

Jan 21, 2013 | 2003 Chrysler PT Cruiser

1 Answer

Air bag light and chime are now constant. they will not stop every 30-45 seconds. is there something i can replace or do myself? 2002 pt cruiser


You probably need to get your vehicle tested to discover what component of the airbag system has defected. Most likely it is the mass sensor.

Feb 05, 2011 | Chrysler PT Cruiser Cars & Trucks

1 Answer

I have a 04 pt cruiser with airbag light and chime intermittent fault code p1685


p1685,,"skim invalid key"
I have no idea what they are talking about, but that is the code.

DTC P1685 is Invalid SKIM Key. The Sentry Key Immobilizer Module (SKIM) is part of the security system and kills the vehicle when a wrong key is used. There may be a problem with your key or the chip reader in the ignition switch. This is something the dealer will need to determine for sure. This code will also be set if someone actually tried to steal the vehicle.


My guesswould beto reset your PCM (unhook bat. and depress brake for 1 min), then try to start the car. If that doesn't work, I guess haul it into a dealership so they can run a diagnostic quote.gif

I got this from another site, check it out.

Aug 07, 2010 | 2003 Chrysler PT Cruiser

1 Answer

Engine light comes on, stays on, doesn't blink,


The last chime is most likely an audible reminder that the check engine light is on. It would be advisable to get the car scanned to see why the light is on. Even if the car seems to be running ok, your fuel economy or emissions could be worse than they should be.

Jul 28, 2009 | 2005 Chrysler PT Cruiser

1 Answer

Airbag light chiming


Try replacing airbag light fuse. It usu' indicates some damaged wiring if it continues to blink. Also there might be a short in wiring due to water.

Jul 24, 2009 | 2007 Chrysler PT Cruiser Touring Hatchback

3 Answers

2001 PT Cruiser Limited Ed. Airbag light keeps coming on and off and chimes every time it does. Is there any way to turn it off for now, its driving me bonkers?


There may be some reasons of coming the airbag light on your PT Cruiser. Some connectors could be loose under seats or sensor of steering wheel could fail. However it is really rear. Your problem is probably caused by common problem in PT Cruisers - by broken wire on driver's seat.
Before you start doing anything disconnect a car battery. After 15 minutes remove a plastic panel from the seat (the one you can see when you open your door). Than you will see a wire in plastic cover. It connects an airbag in your seat and yellow connector under the seat. The wire breaks near to the second plastic T-shaped part (looking from the top of the seat backrest). It is located where is a pooling line and rising seat connector wire - somewhere in the center of lenght of the seat. Put the seat backrest to the vertical position, push up the black plastic cube of the line to remove it and have some room to repair the wire, cut a cloth tape. You should have ***** white and red wires. Inspect the wire about 1,5 inch from the center of the place where was the center of the T-shaped plastic keeper. The wire outside will be looking as new, but coper lines inside used to be broken. Strech slightly one by one of the 2 wires. When you find the break just cut the plastic cover in that place, remove 0,25 inch of the cover from each of cut end of wire and twist the ends or put extra 2 inch insert of the same wire. Wrap the coper wires in insulating tape neatly and tape all of the wires together with the T-shaped plastic keeper. Put on place the line udjusting a backrest of the seat, the keeper and plastic cover of the seat. Connect a battery and check it.
If you are not sure where is the place whre the wire could be broken, it is exactly 30 centimetres from the connector of the airbag. TomasS

Jun 14, 2009 | 2001 Chrysler PT Cruiser

5 Answers

PT Cruiser passenger airbag light and bell go off without reason


HI I may have found y the airbag light goes off and on on pt cruisers. there is a pair of wires that connect to the seat air bag pod, the wires run down the seat and to a connector in th floor. after long in vestigation i found that even thou the wires have a conduit protecting them the wires run under the foam pad and over a steel bar, which caused 1 wire to be cut inside yet there was no tell tale sign from out side the sleeve, it was only when I disconected the battery and then the connector from the airbag and the floor connector removed it and run a meter on the two I found it. when i "pulled" the leads the outer sleeve stretched exposing the fault, the wire had a very clean break in it which was odd but the fault. note that only one wire powers the air bag, the other is a feed to the PCM, hence they are connected at the ends hence not easy to trace and with saftey in mind you must not put meters on the wires while connected to any part of the airbag

Dec 07, 2008 | 2007 Chrysler PT Cruiser Touring Hatchback

Not finding what you are looking for?
2003 Chrysler PT Cruiser Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...