Question about Land Rover Discovery
I'd probably have to double check your temp gage and go from there. What all did you replace? Other than your temp gage, any indications of overheating, like the engine smoking or coolant boiling over. Are you losing coolant? Does the radiator fan work? Did you check for coolant circulation. Check for combustion gases in the coolant.
How hot does it get in degrees F?
Posted on Apr 30, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Had the same problem with my 03 Disco. Went through the usual, checking the fuses, etc. I went ahead and replaced my break light switch on the brake pedal. $15.00 fix, or I thought so; still had the problem! Took it in for repairs and found out it was fuses after all... To get the parking lock to disengage you need to pull of the housing, which is tough and then press in the locking pin at the base of the shift lever to shift out of park. you can do it with the engine running and it will drive just fine until you put it into park again. Check your brake lights if there is a problem. Could be a sign of the brake switch failure. In my case the lights were out, but a cheap trailer rental did the damage. The short in the trailer blew some fuses and it was a problem that cost me $60.00 at the repair shop....
Posted on Aug 27, 2009
The code P1451 on a Land Rover is "Leakage Detection Module Motor power stage error Drive cycle A:Signal out of range - above maximum". This is an OBD-II diagnostic system code. As far as I know, a 1995 Land Rover Discovery does not use a OBD-II system. Is it possible that this rover is a later model year
Posted on Feb 25, 2010
You'll have to call the dealer have them pull the VIN to see if you have the latest and greatest software. Also you can check on the land rover website under owners put in the last 8 digits of your vin number and it will tell you if the BB8900 is fully compatible.
Posted on Aug 15, 2010
Tips for a great answer:
Oct 30, 2015 | Land Rover Cars & Trucks
Feb 21, 2015 | 2001 Land Rover Discovery Series II
Aug 09, 2012 | 2002 Land Rover Discovery Series II
Aug 03, 2012 | 2003 Land Rover Discovery
Nov 29, 2011 | 2002 Land Rover Discovery Series II
Jan 12, 2011 | 2002 Land Rover Discovery Series II
Jan 06, 2011 | 1999 Land Rover Discovery
Dec 05, 2010 | 2003 Land Rover Freelander
Nov 23, 2010 | 2002 Land Rover Discovery Series II
Apr 07, 2017 | 2004 Land Rover Discovery
99 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: