Question about 2004 Chrysler Concorde

1 Answer

04 Chrysler Concorde wnt start I changd the battery it wrked for 2 days nw won't start was coming off the I car started to over heat now wn't crank took it to shop they say I ned a new motor

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 2,124 Answers

If it overheated and won't crank it means that the motor is ceased and would need a complete strip and rebuild if possible depends on damage caused and costs
may be cheaper to fit a used motor and get someone to look at the ceased motor for a quote on a rebuild
most important thing is to find out why it was overheating

Posted on Apr 30, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 42 Answers

SOURCE: 1994 mazda protege 1.8 l auto trans won't start

It could be a faulty Engine Coolant Temperature sensor. It sounds like when it is cold, your computer is interpreting your signal from the ECT (or lack therof) as being at a certain temperature and not providing the right amount of fuel in order to start the engine when it is cold. Does the check engine light blink or flash at all?

Posted on Mar 10, 2009

  • 323 Answers

SOURCE: Chrysler Concorde LXI 4 door - 2004 The car starts up and seconds after, the RPM drops and the car shuts off. The code P0513 comes up on the computer.

That is a code for an invalid skim key. If you have another skim key try it. If it does the same thing then the skim module may be bad.

Posted on May 07, 2009

  • 16 Answers

SOURCE: 2002 chrysler sebring LXI coupe would not start 2

They have either left a wire to the starter unhooked or they have blown a fuse or fuselink

Posted on Jun 16, 2009

  • 101 Answers

SOURCE: chrysler wont start

Sounds like a short maybe. maybe the wire completely broke? if you know a technician, see if the fuel pump is even getting power when key is on

Posted on Jul 02, 2009

  • 55 Answers

SOURCE: CAR WON'T START. NOT BATTERY. CHANGED FUSE AND RAN

There are way too many possibilities for us to try to start to diagnose your car. . Id check all fuses and fusible links if I were you., Body shops often jump start cars that are in their shops for long periods of time, Jump starting can cause alot of issues.

Posted on Aug 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I changd my plugs,fuel filter,air filter and battery & checked all fuses my car starts but still won't fire up what is the problem.


you mean your car cranks over but not start! have you checked the fuel pressure if its low then it won`t start. have you check for spark.

Sep 19, 2015 | Cars & Trucks

1 Answer

My 96th Chrysler Concorde won't start turn the key


Could be the neutral safety switch, or the key switch. Will it crank in neutral instead of park ?

Jul 12, 2013 | Cars & Trucks

1 Answer

Chrysler Concorde want start when it is cold


sound like faulty engine coolant temperature sensor.

Jul 08, 2013 | Cars & Trucks

2 Answers

I changed the oil in my 98 concorde and now it wont start. The oil light is on but not the check engine light.\


do you here the fuel pump working when you turn the key?If not could be a fuse that runs the fuel pump.

Aug 05, 2012 | 1998 Chrysler Concorde

1 Answer

My 2003 chevy malibu cranks but wont start. battery is good and altenator is good


To clarify - - if the engine cranks the battery and starter are ok.
The alternator does not come into play until the engine is running.
If it cranks but won't start, you have to figure out if you are missing fuel to the injectors or spark to the plugs to proceed.
A mechanic would check that and if there are any trouble codes stored in the computer.

Jul 22, 2012 | 2003 Chevrolet Malibu

1 Answer

97 chrysler concorde stalled while on interstate and now won't start


First check coils and battery charge. You will have to pinpoint what the engine is missing...
- Spark
- Fuel
- Compression

All three of these are tested when the engine is being cranked over. There are two way of checking for fuel. Fuel pressure and fuel trigger. Both are very important and must be present for the engine to start. Fuel pressure is self explanatory. You just hook up the gage and see what the reading is. Fuel trigger is check with a noid light. The injector gets unplugged and the noid light gets plugged in to the injector clip. With the engine cranking over, this light must blink. This is the signal to the injectors from the computer. You can have all the fuel pressure in the world, but it wont matter if the injector is not pulsing gas into the cylinder like it should.

Compression tester, spark tester, fuel pressure gage and noid light are all accessible at your local auto store. All three tests play a very important part in diagnosing a no start condition. Be extremely careful when doing these tests.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

May 13, 2012 | 1997 Chrysler Concorde

1 Answer

Ran fine changed battery now it wont crank or start.1995 Chrysler Concorde


I am a strong believer of the KISS therory, so lets start on the most likely. When you replaced the battery, did you also clean the battery cable connections? If not that is the most likely cause! If not, suggest you get jump your car to make sure where the problem is. If it starts with the jump start then it is in the battery system - battery, battery cables, alternator.

Aug 28, 2011 | 1995 Chrysler Concorde

1 Answer

95 concord wont start at times


how do i install a new ignition switch on my 95 chrys conc

Dec 29, 2009 | 1995 Chrysler Concorde

2 Answers

Chrysler wont start


I CHANGE CAM AND CRANK SENSOR,FUEL PUMP,COMPUTER BRAIN BOX AND COIL PACK STILL GETTING NO FIRE UNLESS I JUMP A FIRE WIRE FROM BATTERY

Jul 02, 2009 | 1994 Chrysler Concorde

Not finding what you are looking for?
2004 Chrysler Concorde Logo

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...