Question about 1999 GMC Jimmy
It's a 99. It's old and tired. You don't have limp mode on this. Your cheapest bet is that the TCC lock up or the temp sensor is bad. Other wise it is a rebuild.
Posted on May 16, 2015
Have you checked the computer to see if a code is set. It sounds like maybe the computer has it in limp home mode.
Posted on May 09, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Yeah if you have to tap on it, then that means the brushes in the motor are worn out and you need to replace it. The blower motor is behind the PCM and Coolant Overflow bottle. If you remove these then it will give you better access to motor. You'll have to cut around housing. There should be a groove already there for you, just make sure you don't cut all the way around it. Once you open it and get the new one installed, you'll have to use caulk to seal where you cut it at.
Posted on Dec 20, 2009
SOURCE: transmission tow/haul mode
Hi, the problem is when you are tilting the steering wheel all the way up it's putting to much tenstion on the wires that come outof your shifter that run to the tow/haul button. i am 99% sure your wires are disconected. rewire them and add some extra wire so next time there will be more slack in your wires.
Posted on Jun 09, 2010
Tips for a great answer:
Sep 23, 2015 | Cars & Trucks
Jun 04, 2012 | 1985 GMC Jimmy
Oct 01, 2011 | 1999 GMC Sierra
Dec 03, 2010 | 1999 GMC Jimmy
Sep 29, 2010 | 2001 GMC Yukon XL
Feb 01, 2010 | 2000 GMC Sierra
Nov 28, 2009 | 1999 GMC Jimmy
Jul 25, 2009 | 1999 Chevrolet Silverado 1500
Jan 11, 2009 | 1999 GMC Jimmy
93 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: