Question about 2009 Hyundai Santa Fe

2 Answers

What is the tork for the weel hub inch.pound middle bolt for hyunday santafe 2009 does sombody nows

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 776 Answers

Hi,I dont know the tork for the hub,but I have worked on maney cars in my life time and I have never used a tork, and had know complaits.
so if you wont to do it your whay fine,but I will tell you aney whay so you have options.
just tighten the hub nut fully home then undo the nut slowly untill the disc can move around freely thats all you need to do.
all the best.

Posted on Apr 30, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 24 Answers

Hyundai Sante Fe ; Year Model 2006-2010
Engine code: G6EA
Front Hub: 225+- 30 Nm
Rear Hub: same torque settings
(1991 inch.pound to 2257 inch.pound)

Posted on Apr 30, 2015

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

mx5turbo92
  • 545 Answers

SOURCE: how to remove the right rear hub assembly off of

08c96a1.gif
THER 4 BOLT EACH SIDE.GOOD LUCK,I HOPE THIS HELP

Posted on Jun 04, 2009

  • 14036 Answers

SOURCE: how many pound per sqare inche on the head bolt

HEAD BOLT TORQUE IS 48 FT LBS.

Posted on Feb 14, 2010

freetek
  • 5568 Answers

SOURCE: what is the torque per pound or per in for the

If you are embarking on DIY car care, I highly recommend buying a service manual. You can find them on line from Haynes, eBay, and often as loaners at larger public libraries.
'99 Alero (also covers a number of other related vehicles.)
You'll find complete torque specs, electrical diagrams and many tips.

Posted on Jun 28, 2010

  • 14585 Answers

SOURCE: dealership says to tork cham bolts to 89 in per pound.two bolts snapped, bought 2 new ones still happened

89 inch pounds is equal to 7.5 foot pounds. Check you torque wrench settings.

Posted on Jan 25, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The torque specs when replacing the inake gaskets on a 97 Lumina 3.1 liter enne


The torque specification is a 2-step process; tighten the vertical lower intake manifold bolts (the four middle ones) to 7 Nm (62 lb in). Tighten the diagonal lower intake manifold bolts (two on each end) to 7 Nm (62 lb in). Tighten the vertical lower intake manifold bolts (the four middle ones) to 13 Nm (115 lb in). Tighten the diagonal lower intake manifold bolts (two on each end) to 25 Nm (18 lb ft).

Upper Intake Manifold
Tighten Bolt/stud 25 Nm (18 ft. lbs)
Notice inch pounds and foot pounds. 62 inch pounds is 5.2 foot pounds.

Jan 05, 2017 | Cars & Trucks

2 Answers

I need the torque spec for the valve cover on a 06mercury malin


There is a torque spec for the cylinder head; I don't know of one for the cover.

Jul 14, 2015 | Cars & Trucks

1 Answer

Dealership says to tork cham bolts to 89 in per pound.two bolts snapped, bought 2 new ones still happened


89 inch pounds is equal to 7.5 foot pounds. Check you torque wrench settings.

Jan 25, 2015 | Cars & Trucks

1 Answer

What is the torque on a 1993 nissan 240sx timing chain guard bolt ?


IF YOU TALKING ABOUT TIMING CHAIN COVER TORQUE ON SMALL BOLTS 57 - 66 INCH POUNDS. LARGE BOLTS TORQUE IS 144 - 168 INCH POUNDS. NOW IF YOU ARE TALKING ABOUT TIMING CHAIN LOWER GUIDE BOLTS. TORQUE IS 108 - 168 INCH POUNDS.

Apr 13, 2011 | 1993 Nissan 240SX

1 Answer

Hello I have 6.0L diesel need the torque sequence for the heads


If it's a 6 or its a V-8 it does not matter as long as you start from the center and work your way out to both ends I will do it by numbers using an example of 10 bolts like this do this on both heads and follow the same pattern for the intake system. also go from slightly tight just touching 5 pounds then re due it at 20 pounds then again at 40 pounds then 60 and finally to the exact tork setting using a maker double check the bolts one by one and mark with ink so you know that one is done on the last tork setting give it just a slight click past the exact tork.hope this heps.

9 5 1 3 7
10 6 2 4 8

Jan 19, 2010 | 2004 Ford Super Duty F 450

1 Answer

I would like to know the tork specs on a 2003


Here are the specs per GM. Please pay attention to what is inch pounds and what is foot pounds. (To convert inch pounds to foot pounds divide by 12.)

Lower Intake Manifold Bolt - Center
  • First Pass
7 N·m
62 lb in
  • Final Pass
13 N·m
115 lb in
Lower Intake Manifold Bolt - Corner
  • First Pass
13 N·m
115 lb in
  • Final Pass
25 N·m
18 lb ft

Sep 01, 2009 | 2003 Pontiac Grand Am

2 Answers

Need torque settings for honda ballade cylinder head bolts


dear friend-your torque setting is cold 66 nm

Jul 23, 2009 | 1998 Honda Civic

1 Answer

Need to know the tork on rocker arm and intake for 2000 sonoma 4.


rockers get 22 ft. lbs.
lower intake gets 27, then 106, then 134 inch lbs
upper intake gets 44, then 80 inch pounds

Jan 10, 2009 | 2000 GMC Sonoma Extended Cab

4 Answers

2002 dodge ram 4WD front hub bearing


Here is the easiest way . take a 14mm socket and extentsion and place it on the bolts and place againt your axle tube and start your truck and turn your wheel against it instead of pounding you will use your powersteering like a press to get your hub out its quicker and less strenous than pounding on the bolts ive done this many times i even made a extentsion for it i use a 14mm 1/2 drive shallow socket and a extension thats about 4 inches long i know im posting late on this one but if it helps anyone out then great

Dec 13, 2008 | 1999 Dodge Ram 2500 4WD

4 Answers

Chevy 5.7 17 bolt heads tork specs


Cylinder Head Bolt (Preferred Method) All Bolts First Pass in Sequence 22 ft.lb Long Bolt Final Pass in Sequence 75 deg. Medium Bolt Final Pass in Sequence 65 deg Short Bolt Final Pass in Sequence 55 deg. Cylinder Head Bolt (Optional On-Vehicle Strategy) First Pass in Sequence 26 ft.lb Second Pass in Sequence 44 ft.lb Final Pass in Sequence 66 ft.lb

Oct 13, 2008 | 1999 Chevrolet C1500

Not finding what you are looking for?
2009 Hyundai Santa Fe Logo

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...