Question about 2004 Chrysler Sebring Sedan

Open Question

How to clean screen in power steering pump 2004 sebring 4 door

V6 146km on motor power steering pump filter screen in resavor

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
morse008
  • 1111 Answers

SOURCE: power steering belt diagram for 2004 sebring 4

the diagram should be posted on the core support in front of the radiator or even under the hood of the vehicle have you looked to your owners Manuel as well however it should clearly be posted under the hood or on one of the strut towers along the side at some point

Posted on Sep 06, 2009

Ad
jlisagearhea
  • 412 Answers

SOURCE: Where is the fuel filter located on a 2004 Chrysler Sebring Sedan

Some of the Sebrings have two filters(one is called a sock).The sock(which all sebrings have) is located in the fuel tank itself on the pump module.If this model is the JXI then the external filter is located on the belly of the car between the tank and drivers rear seat. I hope I could help!!!

Posted on Apr 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The easiest way to take off a water pump for 2004 Chrysler Sebring


Take it to a garage and say "put a new water pump in this for me".

2004 Chrysler Sebring 2.7Ltr. Water Pump Replacement ...

z? 29:29 https://www.youtube.com/watch?v=ebeXcNmBnnE Sep 19, 2015 - Uploaded by Paul Veltum In this video I'll walk you through replacing the water pump on this 2004 Chrysler Sebring with it's 2.7 ...

2004 Chrysler Sebring Timing Belt Water Pump Before 90K ...

2q==? 13:03 https://www.youtube.com/watch?v=UQHRa28sRkY Nov 25, 2012 - Uploaded by Mastermind Denver This video shows why we at Mastermind Enterprises Auto Repair Shop in Denver recommend replacing the ...

WATER PUMP REPLACEMENT IN CHRYSLER 2.7L ...

9k=? 4:52 https://www.youtube.com/watch?v=z_QrXR2jcb8 Mar 7, 2014 - Uploaded by kzguy2 2008 Dodge Charger 2.7l was in need of a new water pump due to it leaking. ... 2004 Chrysler Sebring 2 ...

2004 chrysler sebring water pump weep hole inspection ...

2q==? 0:15 https://www.youtube.com/watch?v=wzqHaQ40doQ Feb 26, 2014 - Uploaded by Graeme Tolton 2004 chrysler sebring water pump weep hole inspection with borescope. ... 2004 Chrysler Sebring 2.7Ltr ...

Chrysler 2.7L Water Pump Installation Problems - YouTube

9k=? 3:30 https://www.youtube.com/watch?v=h5_VFJ1gCpI Nov 19, 2014 - Uploaded by South Main Auto Repair When I installed this water pump on the 2006 Chrysler Sebring 2.7L I ran into a ... 2004 Chrysler Sebring 2 ...




Feb 15, 2016 | Chrysler Cars & Trucks

1 Answer

Whining coming from front


It sounds like the power steering pump has a broken pump vane and will need to be replaced and then the system flushed to get the debris out of the system so it won't ruin the new pump.

Feb 23, 2012 | 2004 Chrysler Sebring

2 Answers

How to change the power steering fluid on a 2003 carvan


remove the power stering return line and place the loose end in a bucket and start the engine then keep adding power stering fluid to the resavore intill clean fluid runs from the return line the reinstall the return line and top off the resavore

Nov 10, 2011 | 2003 Dodge Caravan

1 Answer

How to install a power steering pump for a 1997 chrysler seabring conv


Chrysler Cirrus/Stratus/Sebring/Avenger/Breeze 1995-1998
Power Steering Pump - REMOVAL & INSTALLATION

Cirrus, Stratus, Sebring Convertible and Breeze
(see Figures 1, 2, 3 and 4)
  1. Disconnect the negative battery cable from the left strut tower. The ground cable is equipped with an insulator grommet, which should be placed on the stud to prevent the negative battery cable from accidentally grounding.
  2. Siphon as much power steering fluid out of the reservoir as possible.
  3. Raise and safely support the vehicle.
  4. Remove the right front tire and wheel assembly.
  5. Remove the splash shield from the right front wheel well.
c901554.jpg

Fig. 1: Power steering pressure hose attachment to the pump-with Variable-Assist steering

8786c07.jpg

Fig. 2: Power steering pressure hose attachment to the pump-without Variable-Assist steering
  1. Disconnect the power steering pressure hose from the pump.
  2. Remove the hose connection on the power steering pump.
e7733b2.jpg

Fig. 3: Typical power steering pump front bracket attachment
  1. Remove the power steering adjusting bolt.
  2. Remove the power steering pump rear attaching bolt.
  3. If so equipped, remove the Anti-lock Brake System (ABS) hydraulic control unit heat shield.
  4. Remove the wheel speed sensor retainer bracket from the right inner fender.
  5. Remove the wheel speed sensor sealing grommet from the right inner fender.
  6. Disconnect the speed sensor wiring.
  7. Push the wiring through the hole in the inner fender.
If not equipped with anti-lock brakes, the hole will just have a sealing plug.
  1. Remove the bolt attaching the power steering front bracket to the mounting bracket. Access to the bolt is gained through the hole for the speed sensor wiring.
  2. Remove the power steering pump drive belt.
  3. Remove the power steering pump and the front bracket as an assembly.
To install:
  1. Install the power steering pump and bracket.
  2. Reinstall the bolt at the adjusting slot, but do not tighten.
  3. Reinstall the bolt mounting the power steering pump to the rear mounting bracket, but do not tighten.
  4. Reinstall the power steering pump top bolt, but do not tighten.
  5. Reconnect the power steering hoses.
b72b14a.jpg

Fig. 4: Install a new O-ring gasket on the hose fitting
Use a new O-ring when reinstalling the power steering pressure hose.
  1. Reinstall the drive belt.
  2. Adjust the drive belt and tighten the power steering pump bolts to 40 ft. lbs. (54 Nm).
  3. Reinstall the splash shield.
  4. Reinstall the tire and wheel assembly.
  5. Lower the vehicle.
  6. Reconnect the negative battery cable.
  7. Refill the reservoir and bleed the power steering system.


Sebring Coupe and Avenger
  1. Disconnect the negative battery cable.
  2. Remove (drain, suction pump, etc.) as much power steering fluid as possible.
  3. Disconnect the return fluid line. Remove the reservoir cap and allow the return line to drain the fluid from the reservoir. If the fluid is contaminated, disconnect the ignition high tension cable and crank the engine several times to drain the fluid from the gearbox.
Cover any components located underneath the power steering pump with a shop towel to protect them from damage due to power steering fluid spillage. For example, the A/C compressor or alternator, depending on vehicle and engine, is below the power steering pump, so cover the A/C compressor or alternator with a shop towel before removing any hoses.
  1. Loosen (but do not remove) the power steering pump mounting bolts and remove the drive belt.
  2. Remove the pressure switch connector from the side of the pump.
  3. Disconnect the pressure line.
  4. Unbolt and remove the pump from the mounting bracket.
To install:
  1. Clean all parts well. Inspect the pump pulley for cracks. Check the hoses carefully for cracks or signs of weakness.
  2. Install the pump, wrap the belt around the pulley and lightly tighten the mounting bolts.
  3. Replace the O-rings and connect the pressure line. Connect the pressure line so the notch in the fitting aligns and contacts the pump's guide bracket. Tighten the fitting to 13 ft. lbs. (18 Nm).
  4. Connect the return line and secure with the clamp.
  5. Fasten the pressure switch connector.
  6. Adjust the power steering belt for proper tension and tighten the adjusting bolts.
Use only MOPAR ATF PLUS automatic transmission fluid type 7176, ATF+3 automatic transmission fluid, or equivalent, in the power steering system of Sebring coupe and Avenger models.
  1. Refill the reservoir and bleed the power steering system.

Hope this help to solve it (remember comment and rated this). TY for using Fixya.

May 13, 2010 | 1997 Chrysler Sebring

1 Answer

Where is the fuel filter located on a 2004 Chrysler Sebring sedan?


Some of the Sebrings have two filters(one is called a sock).The sock(which all sebrings have) is located in the fuel tank itself on the pump module.If this model is the JXI then the external filter is located on the belly of the car between the tank and drivers rear seat. I hope I could help!!!

Apr 29, 2010 | 2004 Chrysler Sebring

1 Answer

2004 Hyundai Sante Fe has hard steering and whining at low idle. Changed Power steering pump and reservoir, and rack and pinion, flushed system. No change


HI check your power steering oil pump reservoir filter screen this seats at the bottom of reservoir is probably plug .it can cause the pump to aerate if thats your case replace reservoir.for proper inspection of reservoir completely empty it and check. hope this helps.

Sep 25, 2009 | 2004 Hyundai Santa Fe

2 Answers

Power steering pump still leaks after putting new one in.


the bubbles are just air in the system, it will eventualy go away. are you sure the leak is from the pump or is it just comming out the cap because of the air. also did you chk. the pressure line? that maybe where your leak is. unless you got a crack in the resavor, its most likely the pressure line. there is a pressure line and a return line.

Jan 28, 2009 | 2001 Dodge Dakota

Not finding what you are looking for?
2004 Chrysler Sebring Sedan Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...