Question about 2005 Chevrolet Equinox LT
Check to see with a noid light if injectors are firing 9 times out of 10 they are not try replacing crank position sensor
Posted on Jun 05, 2015
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
With all due respect for the opinion - I suggest you will do it better working from the underside for the 3 on the rear of engine.
Four points in your story motivated me to try from the underside (and I just finished the job without any hicups):
- mechanics suggested from the underside
- 130 lb sitting in the engine compartment will likely damage or crack something
- removing the distributor should not be needed
I drove the car with the front wheels on a pair of inclines to get more clearance underneath, secured it, then squezed from the front between the wheels. A good thin flurescent light can fit from the bottom up to help you see what you're doing.
The boots from the spark plugs I removed without much effort, then with fingertips I felt the exact place of the plugs. I fit a short 3" extension over the socket, then squeezed the handle and started turning. All theree came out without problems (before removing completely I also squeezed the extension pipe of a can of compressed air and blew air to clean around the plugs).
You need to "see" with your fingers and remember how the plugs are inclined to fit the new ones, but otherwise is just a little exhausting that you have to be a contortionist and find a good position (something to raise your head while working underneath, like a cardboard box would be useful).
So the bottom line is that it works as well from the bottom and don't have to remove anything else.
Posted on Mar 01, 2009
no could b a bad relay or the connection at the fuel pump r other if u have to volt meter /ohms meter check relay to see if good
Posted on Sep 24, 2009
open the hood and find the dipstick for the tranny, passenger side up by the firewall, there are instructions most of the time on the dip stick.
have the car running and in park, on the dipstick there will be a cold mark for if the tranny is not warmed up, and a hot mark for if the tranny is at running temp. mark sure the fluid is in the checkered lines if not add fluid
Posted on Sep 27, 2009
SOURCE: 2005 chevrolet equinox with rear
ive got a 07 equinox and the rear hatch wont open as of yesterday. on the inside of the hatch there is an access plug you can pop off and inside you'll see a metal switch with a hole in it. if you push it away from yourself, it will unlatch it. i dont know why the hatch wont open as ive checked the fuse and its ok.
Posted on Mar 13, 2010
Tips for a great answer:
Jan 01, 2016 | 2007 Chevrolet Chevrolet Equinox LT
Aug 06, 2014 | 2005 Chevrolet Equinox
Aug 02, 2014 | 2006 Chevrolet Equinox
May 21, 2014 | 2005 Chevrolet Equinox LT
Feb 16, 2011 | 2005 Chevrolet Equinox
Jan 06, 2011 | 2005 Chevrolet Equinox
Dec 21, 2010 | 2007 Chevrolet Equinox LS New Cars
Apr 27, 2017 | 2005 Jeep Grand Cherokee
Aug 16, 2009 | 2005 Chevrolet Equinox
205 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: