Question about 1994 Chrysler Concorde

1 Answer

Battery was dead,changed battery and now its all dead ,i need to know how to reset computer plz and thank you

Posted by on

  • Darcy Genereaux
    Darcy Genereaux Apr 30, 2015

    starter is fine alternator is fine i just need to know how to reset the computer on this car thanx

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 530 Answers

You should not have to reset anything but the radio. i would get a trouble light and start checking from the battery to the starter.

Posted on Apr 30, 2015

Testimonial: "starter is fine alternator is fine car was driving with a boost just before and both the starter and alternator was tested ..it is the computer needing to be reset just not sure how to do it on a concorde...that is what i am needing to know"

  • charles chandler Apr 30, 2015

    Batteries are changed everyday in all sorts of cars and nobody has to reset the computer. i have done this kind of work for many years and never had this problem. i just can't fix this for you through the computer just give sugestions.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset the computer on 2001 Mitsubishi after replacing the alternator it is a petrol 4 x 4 a 3litre


Not sure what your meaning of why need to reset the computer, the alternator has nothing to do with a check engine light so if that is the issue with check engine light need to scan vehicle find what code is fix that if what to know how to dead boot computer 1.pull + battery cable leave off 2. Get in vehicle turn lights on yes I know there not going to come on we are draining the capacitors in computer 3. Leave light switch on depress brake several times 4. Insert ignition key turn like cranking vehicle couple times. 5. Turn everything off lights key an reinstall + battery cable start vehicle check engine light should be off. Basically that is a dead boot for computer draining all power for it.

Oct 29, 2016 | Mitsubishi Cars & Trucks

1 Answer

Dear sir, i have lumina 2005 with seat belt sensor broken... Once my battery gone dead and then I jumped it and started... Since then SRS fault is being displayed on the dash board. And engine oil service...


Sometimes if you pull the positive terminal off your battery it will reset . I would check with the dealer all you need is to call the service department at your local Chevy Dealer.

Sep 03, 2014 | Cars & Trucks

4 Answers

Why does the change oil light soon keep coming on.


It comes on when the computer recognizes that you need a oil change. In older models, they tend to come on for no reason. If the oil is good and you know it doesn't need changed, don't worry about it. A oil changed is recommended at 3000 miles, but I have always went 5000. You car has a sensor that recognizes the oil command. You might be able to get rid of it by taking off the hot side post of the battery. If your not worried and you know the oil is ok, I wouldn't worry about it. Make sure the cap is on tight though. If you have anymore questions, please let me know. I am here to help. Thanks for choosing FixYa.

Feb 23, 2011 | 1999 Buick Century

1 Answer

Changed out battery now we need to reset computer


On most vehicles if you leave the battery disconnected for 3 hrs the computer will reset. This is enough time for the power back up in the computer to go dead and reset itself. I know it sounds stupid, but it works. Should make check engine light turn off

Oct 30, 2010 | 2006 Dodge Caravan

2 Answers

I have a 2004 ford lariot the battery had a dead cell in it so i changed it. now none of the accessories are workin properly radio wont turn off with key passenger side window doesnt roll up just random...


Disconnect the battery again for about 20min and reconnect the battery this should allow the computer
to fully reset, you will still have to reset your radio
stations and clock etc. hope this helps good luck.

Jan 16, 2010 | Ford F-150 Cars & Trucks

2 Answers

If I replace a Murano battery (not totally dead) do I have to reset the computer as well ? Thank you.


It would be best .....as on all cars made after 2000 to keep voltage in the system when changing the battery.
If you have a battery charger attach it to the alt output connection and place it on it's lowest setting,usually 2 amps.
Now you can change the battery without memory circuits causing problems.
You can also buy a 9volt battery adapter to plug into your accessory power outlet to keep voltage in the system when disconnecting the battery.
Otherwise.....some circuits may require resetting after 0 voltage is present.....the engine computer will relearn it's settings quickly.

Nov 01, 2009 | 2003 Nissan Murano

2 Answers

The battery went dead in my 1995 jeep. I changed the battery. how can i reset the anti-theft system so I can get it started?


easy- close all doors, put key in drivers side door first, then lock/unlock 3 times, then go to passanger side, lock/unlock 3 times and thats it!

Sep 03, 2009 | 1995 Jeep Cherokee

2 Answers

Idles rough upon start , goes dead when letting up on gas.


If the bat went dead and was disconnected it can take 25 to 50 miles of driving for computer to reset sensors and controls. Sounds like MAF Sensor maybe reading different than when it was first driven. Did you drastically change climates or altitudes, New readings from when it originally was put into service. Slight changes in temp, alt and other variables gradually reset, if driving does not improve within 50 miles it will need diagnostics.

Jan 06, 2009 | 2002 GMC Yukon Denali

Not finding what you are looking for?
1994 Chrysler Concorde Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...