Question about 1999 Dodge Durango

1 Answer

How to repair blend door for dodge durango 1999

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 16,043 Answers

It can be the actuator, the shaft or the diverter. It can also be something that has fallen in the plenum like a pen or some object that can get through the vents or the defroster.

Posted on May 24, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 137 Answers

SOURCE: 1999 DODGE DURANGO AUTOMATIC DOOR LOCKS.

That feature is called rolling locks.
In order to program the rolling door locks you will need to do the following procedure (listed on page 10 of the owners manual).
1. Close all of the doors.
2. Place the key in the ignition and cycle the key from the OFF to the ON position for a total of 4 to 5 times, ending in the ON position, do not start the engine.
3. Press the driver's side power lock switch to LOCK the doors within 30 seconds of cycling the key.
4. You will hear a single chime when programming is complete.
5. To cycle the feature on/off repeat the procedure.

Posted on Jan 11, 2009

5 car stud
  • 10 Answers

SOURCE: 1999 Dodge Durango NO HEAT

Bad NEW thermostat? I had the same problem on my first generation Dakota. The problem for me turned out to be the DODGE thermostat I used to replace the old Dodge part. I went and got a Stant from local auto parts store using the standard temperature spec and quit shivering the next time I drove it. I hope that helps!

Posted on Jan 17, 2009

  • 217 Answers

SOURCE: getting rear gears out of the difential case 1999 dodge durango

  1. Raise and support vehicle. Ensure that the transmission is in neutral.
  2. Remove wheel and tire assembly.
  3. Remove brake drum. Refer toBrakes, for proper procedure.
  4. Clean all foreign material from housing cover area.
  5. Loosen housing cover bolts. Drain lubricant from the housing and axle shaft tubes. Remove housing cover.
  6. Rotate differential case so that pinion mate gear shaft lock screw is accessible. Remove lock screw and pinion mate gear shaft from differential case
  7. Push axle shaft inward and remove axle shaft C - clip lock from the axle shaft
  8. Remove axle shaft. Use care to prevent damage to axle shaft bearing and seal, which will remain in axle shaft tube.
  9. Inspect axle shaft seal for leakage or damage.
  10. Inspect roller bearing contact surface on axle shaft for signs of brinelling, galling and pitting. If any of these conditions exist, the axle shaft and/or bearing and seal must be replaced

Posted on Feb 11, 2009

LEFTY64
  • 69 Answers

SOURCE: Need to the torque specs for a 1999 Dodge Durango

Head Torque sequence Step 1: torque to 50 Ft/Lbs Step 2: torque to 105 Ft/Lbs recheck final torque in sequence.

Torque intake manifold: Step 1: 12 inch/Lbs, (hand tight) Step 2: 72 inch/Lbs, (6) Ft/Lbs Step 3: 12 Ft/Lbs
torque intake plenum: Step 1: 24 inch/lb (hand tight) Step 2: 48 inch/lb (4) Ft/Lbs Step 3: 84 inch/lb (7) Ft/Lbs (To torque bolts, start in center using crisscross pattern)

Posted on Apr 07, 2009

  • 323 Answers

SOURCE: 1999 dodge durango heater core

It's a big job. Drain the coolant down, recover the freon in the ac system and disconnect the lines and heater hoses. Lower the steering column, remove the instrument panel assembly, remove the heater housing. Split the case halves on the housing and there you are. Usually around 500 to 700 dollars at a dealership.

Posted on May 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What years interchange with a 1999 dodge durango driver's side doors


William, 1999 Dodge Durango, years for drivers door interchange are 1998 to 2000. "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Aftermarket Dodge Durango Hood Door Fender Grille Etc Prices Reviews News...
How to Remove Replace Front Door Panel 99 Durango 98 03
https://answers.yahoo.com/question/index?qid=20100413095252AADPNfw

Jun 04, 2016 | 1999 Dodge Durango

2 Answers

Where is the blend door on a 1999 intrepid


http://www.dodgeintrepid.net/showthread.php?t=89711

Nov 13, 2014 | 1999 Dodge Intrepid

1 Answer

ACCESS BLEND DOOR


blend door is inside the heat/ac box that contains the heater core that you changed. It is vacuum operated, so check all of your vacuum lines. There is a vacuum line that goes thru the firewall, right above or below the 2 heater hoses.

Jan 01, 2014 | 1999 Dodge Durango

1 Answer

How do i get to the blend door of my 99 durango


What door are you talking about, heat?

Feb 01, 2013 | 1999 Dodge Durango

2 Answers

2000 dodge durango


I assume this truck has daul zone heating and a/c, the air blows but is not hot? if this is the case then you may have dissconnected the blend door actuator or it just went bad. this is common that the actuator goes bad,
there are two seperate actuators that control the hot/cold door in the heater box this way the passenger and driver can set there on temp.
the actuator for the drivers side is locted on the drivers side under the dash on heater box, the blower is on the passenger side , you can check connections but i do not think it is that but rather the actuator.

Jan 16, 2013 | 1999 Dodge Durango

1 Answer

1999 durango vent control switch will not let AC blow threw vents only defrost


Usually this is a problem with the blend doors under the dash. You either have a vac leak, a dead motor, or a faulty door.
The control opens and closes the doors to direct air thru the heater core and evaporator core along with directing air thru the vents.
When a problem occurs, the default position is the defrost vents to make sure the windshield remains clear.
You can do an internet search for "repair durango blend door" for more info.

Jul 29, 2012 | 1999 Dodge Durango

1 Answer

2003 dodge durango front AC vents not working


had this trouble in a dakota it was a blend door in the heater unit. had to remove entire dash to repair

Aug 10, 2009 | 1999 Dodge Durango

1 Answer

My durango does not heat up fast enough


Ok then the problem is the air temp control blend door actuator inside the dash. This is a very common complaint on all models since they went to an electric motor operated blend door from the old vacuum motor design.

Dec 17, 2008 | 1999 Dodge Durango

Not finding what you are looking for?
1999 Dodge Durango Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...