Question about Chevrolet Cars & Trucks

Open Question

Power feed to fuse box - Chevrolet Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause half of the fuses to be dead no power at all


It is not uncommon to have a fuse in another fuse box that fuses a lot of fuses in another fuse box, I would be checking every fuse in the vehicle, if fuses are good I'd be looking at the power feed wires

Jun 23, 2015 | 2007 Kia Rio 1.6

1 Answer

Reason for complete loss of ignition power feed


what kind of car? do you have a power distribution box check the connection going into the box it's + and if there is none coming in the box no power check a circuit with a meter in the box for voltage and check the fuses related to the ignition

Feb 17, 2015 | Cars & Trucks

1 Answer

Why doesn't my Toyota Camry have any power to the inside of the car.


it only takes 2 thing to fix this, a voltmeter and a schematic
does car run.?
headlights work, MUST BE, you said INISide ONLY (IMPLIED)
FOR SURE ITS fuse blow. my wild guess is you dont know how
many fuse boxes the car has nor their location
the operators guide covers this. lost that?
so does the TOY FSM book, factory service manual.
the main fuse box has split loads. and power feed that can be 3 paths , hot all time (head lights) ignition 1 and ignition 2 feeds.

the inside of the car has many lights, even warning lights
dome,, dash dimmer lights gauges and their lamps.
and more. so if all are dead, that means.......
no power to the ignition switch or
no power out of the switch,
if no power in , to swtich that usually means fuse blown under hood
all power comes from there, and the PDC box there.
check all fuses with a voltmeter.
and bingo. oops this fuse has 12v in but 0volts out.

Dec 30, 2014 | 1994 Toyota Camry

1 Answer

Rear lights not working on 2002 suzuki grand vitara


In the underdash fuse/relay box, the 15A TAIL fuse feeds power to the coil of headlight relay 2. When the combination switch is set to TAIL, the relay closes and the outer tail lamps light. In the same underdash fuse/relay box, the 20A STOP fuse feeds power to the brake light switch. When the brake pedal is pressed, the inner brake lamps light. The underdash fuse/relay box also contains the 10A TURN BACK fuse which feeds power to the hazard switch and the turn signal relay. Relay output is fed to the combination switch and turn signal power is applied to the selected middle tail light. The fourth fuse in the underdash fuse/relay box is the 15A HAZARD fuse which feeds power to the hazard switch and turn signal relay. When the hazard switch is set, the turn lamps on both sides begin flashing.

Sep 18, 2012 | 2002 Suzuki Grand Vitara

1 Answer

Were are the fuses for ash tyay


Fuse #9 feeds the power outlet and fuse #18 feeds the lighter outlet. They are both located in the fuse box in the trunk, next to the battery. If you open the trunk and lift the floor up you'll see them hiding under there. The numbers should be called out on the cover for the fuse box.

Sep 06, 2012 | 2006 Chrysler 300

1 Answer

Is power always on at fuse box? It seems I only have power to half of the fuse box in my 1975 corvette


some of the fuse will only have power when that circuit is activated.you may have to turn on circuits to check all the fuses.things like headlights,blower motor,anything powered up with only the key on,as an example.there have been some cases were the power feed bar(for a lack of word)rots out on the back of the fuses box and needs to be repaired or replaced.

Apr 12, 2011 | Chevrolet Corvette Cars & Trucks

1 Answer

I need a fuse box diagram for a 1992 Ford Ranger. Any idea where I could find one?


owner manual.

here's the big ones for 1994 ranger. all i have
Section 18-01: Wiring and Circuit Protection 1994 All Ranger, Explorer and Aerostar Vehicles Workshop Manual
SPECIFICATIONS Specifications

High Current Fuses And Circuit Breaker — Ranger 2.3L, 3.0L And 4.0L
Circuit Size Location Electric Fuel Pump 20 Amp Fuse Power Distribution Box Headlamp Switch Feed 40 Amp High
Current Fuse Power Distribution Box #36 Circuit Alternator Output #2 15 Amp Fuse Power Distribution Box Fuse Panel 60 Amp High
Current Fuse Power Distribution Box Power Locks 20 Amp High
Current Fuse Power Distribution Box #38 Circuit Alternator Output #1 12 Ga Fusible
Link Integral with 14305 W/A Powertrain Control Module and Power Relay 30 Amp High
Current Fuse Power Distribution Box 4x4 Electric Shift 20 Amp High
Current Fuse Power Distribution Box Ignition Switch Feed 60 Amp High
Current Fuse Power Distribution Box High Beams and High Beam Indicator 22 Amp C.B. Integral with Headlamp Switch Front Wiper and Washer 6 Amp C.B. In Fuse Panel Power Windows 30 Amp C.B. In Fuse Panel Cigarette Lighter, Flash to Pass and Power Lumbar 20 Amp C.B. In Fuse Panel


29af2f7.gif
e4cf291.gif

May 13, 2009 | 1992 Ford Ranger

2 Answers

Elec


fuse 19 in the interior fuse box feeds those circuits...fuse I in the fuse box under the hood feeds fuse 19...i know you checked the fuses but did you check them for power

Jan 06, 2009 | 1999 Chrysler 300M

2 Answers

1999 Ford Windstar fuse box


check your fuse box under the hood for supply fuses

Aug 25, 2008 | 1999 Ford Windstar

1 Answer

Ford Fairmont au 2000 mod.


3 fuses involved. 9 & 13 feed power to radio, 15 feeds power to antenna. All located in fuse box

Jun 17, 2008 | Ford Fairmont Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...