Question about 1988 Mazda 323 Hatchback

1 Answer

Where about is the adjustment bolt to loosen the power steer belt

Won't to change the alternator belt thank you

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mazda Master
  • 42,869 Answers

No bolt it's called a belt tensioner and you need a long wrench to just spring it loose so belt can be slipped off and on.

Posted on Apr 29, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the power steering belt on a 4g13



ADJUSTMENT

Excessive belt tension will cause damage to the alternator and water pump pulley bearings, while, on the other hand, loose belt tension will produce slip and premature wear on the belt. Therefore, be sure to adjust the belt tension to the proper level.
To adjust the tension on a drive belt, loosen the adjusting bolt or fixing bolt locknut on the alternator, alternator bracket or tension pulley. Then move the alternator or turn the adjusting bolt to adjust belt tension. Once the desired value is reached, secure the bolt or locknut and recheck tension.


REMOVAL & INSTALLATION

1.5L, 1.6L, 1.8L, 2.0L and 2.4L Engines


0900c15280037bf7.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Accessory V-belt routing-Mitsubishi 1.5L, 1.6L, 1.8L, 2.0L and 2.4L engines
Alternator Belt


0900c15280037bf8.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Loosen the adjuster lock bolt . . .


0900c15280037bf9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. . . . then remove the alternator belt from the engine

  1. Loosen the alternator support nut.
  2. Loosen the adjuster lock bolt.
  3. Rotate the adjuster bolt counter clockwise to release the tension on the belt.
  4. Remove the belt.

To install:
  1. Install the belt on the pulleys.
  2. Rotate the adjuster bolt clockwise until the proper tension is reached.
  3. Tighten the adjuster lock bolt and the alternator support nut.

POWER STEERING BELT


0900c15280037bfa.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. After the adjusting and fixed bolts are loosened, rotate the pump . . .


0900c15280037bfb.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. . . . then remove the power steering belt from the engine

  1. Remove the alternator belt as described above.
  2. Loosen the power steering pump adjusting bolts.
  3. Remove the power steering pump fixed bolt on the rear of the bracket.
  4. Rotate the pump toward the engine and remove the belt.

To install:
  1. Install the belt on the pulleys.
  2. Rotate the pump until the proper tension is reached.
  3. Tighten the adjusting bolts on the pump.
  4. Tighten the fixed bolt on the rear of the bracket.
  5. Install the alternator belt.

A/C COMPRESSOR BELT
  1. Loosen the tension pulley and remove the belt.
  2. The installation is the reverse of the removal.

3.0L DOHC, 3.0L SOHC Galant, and 3.5L Engines


0900c15280037bfc.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Serpentine belt routing-Mitsubishi 3.0L engines (except 1998-00 Galant models)


0900c15280037bfd.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Accessory V-belt routing-Mitsubishi 3.5L and 1998-00 3.0L SOHC Galant engines
ALTERNATOR AND A/C COMPRESSOR

  1. Disconnect the negative battery cable.


CAUTION Wait at least 90 seconds after the negative battery cable is disconnected to prevent possible deployment of the air bag.
  1. Raise and safely support the vehicle and remove the front undercover.
  2. Loosen the tension pulley fixing nut and relieve the tension on the belt by turning the adjusting bolt.
  3. Remove the belt.

To install:
  1. Install the belt on the crankshaft and alternator pulleys.
  2. Using the adjusting bolt on the tensioner, tighten the belt to the desired tension.
  3. Tighten the fixing nut to hold the adjustment.
  4. Install the undercover and lower the vehicle to the floor.
  5. Connect the negative battery cable.

POWER STEERING BELT
  1. Disconnect the negative battery cable.


CAUTION Wait at least 90 seconds after the negative battery cable is disconnected to prevent possible deployment of the air bag.
  1. Raise and safely support the vehicle and remove the undercover.
  2. Remove the alternator and A/C compressor belt.
  3. Lower the vehicle and remove the cruise control pump link assembly.
  4. Place the power steering hose under the oil reservoir.
  5. Loosen the tension pulley fixing bolts and remove the power steering pump drive belt.

To install:
  1. Install the power steering pump drive belt.
  2. Insert an extension bar or equivalent into the opening at the end of the tension pulley bracket and pivot the pulley to apply tension to the belt.
  3. Tighten the fixing bolts.
  4. Raise the vehicle and install the alternator and A/C compressor belt.
  5. Install the undercover and lower the vehicle.
  6. Connect the negative battery cable.

3.0L SOHC Diamante
  1. Disconnect the negative battery cable.
  2. Loosen the lockbolt on the face of the A/C tensioner pulley.
  3. Turn the adjusting bolt of the A/C tensioner pulley to loosen the tension of the A/C belt.
  4. Remove the A/C compressor belt.
  5. Loosen the locknut on the face of the power steering/alternator tensioner pulley.
  6. Turn the adjusting bolt of the tensioner pulley to loosen the tension of the belt.
  7. Remove the power steering/alternator belt.

To install:
  1. Install the power steering/alternator belt first and then the A/C compressor drive belt.
  2. Adjust the belts to the proper tension by turning the adjusting bolts and tighten pulley fixing nut/bolt.
  3. Tighten the mounting nut of the power steering/alternator tensioner pulley to 36 ft. lbs. (50 Nm).

Mar 21, 2013 | 1996 Mitsubishi Mirage

1 Answer

Need belt routing diagram for 2001 chrysler sebring lxi


Thanks for using FixYa.




jturcotte_2444.gif

Fig. Accessory drive belt routing-2.7L engine
Chrysler Cirrus & Sebring Convertible; Dodge Stratus; Plymouth Breeze



jturcotte_2445.gif

Fig. Accessory drive belt routing-Chrysler 2.7L engine





2.7L Engine
A/C & Alternator Belt

  1. Raise and safely support the vehicle.
  2. Remove the right front wheel and belt splash shield.
  3. Loosen tensioner locking bolt and pivot bolt.
  4. Rotate tensioner clockwise to allow enough slack to remove belt

To install:
  1. Install the air conditioning compressor/alternator belt on pulleys, tensioner in slack position, slip belt over idler last.
  2. Adjust drive belt tension.
  3. Install the belt splash shield and right front wheel.
  4. Lower vehicle.
    jturcotte_2446.gif

    Fig. Installing A/C & alternator belt-2.7L engine


  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Raise and safely support the vehicle.
  3. Remove the right front wheel and belt splash shield.
  4. Loosen the tensioner locking bolt and pivot bolt.
  5. Rotate tensioner clockwise to allow enough slack to remove the belt

To install:
  1. With the tensioner in a slack position, install the Air Conditioning (A/C) compressor/alternator belt on the pulleys. Slip the belt over the idler last.
  2. Adjust the drive belt tension.
  3. Install the belt splash shield and right front wheel. Tighten the wheel lug nuts to 100 ft. lbs. (136 Nm).
  4. Lower the vehicle.

Power Steering Belt
  1. Raise and safely support the vehicle.
  2. Remove the right front wheel and belt splash shield.
  3. Remove the air conditioning compressor/alternator belt.
  4. Loosen belt adjusting bolt. It is not necessary to loosen the pivot bolt on the power steering pump. There is a bushing incorporated into the power steering pump/bracket that allows it to pivot.
  5. Remove the power steering belt.

To install:
  1. Install the power steering belt on pulleys.
  2. Adjust drive belt tension.
  3. Install the air conditioning compressor/alternator belt.
  4. Install the belt splash shield and right front wheel.
  5. Lower vehicle.


Oct 27, 2011 | Cars & Trucks

1 Answer

Steering wheel shakes when the Aircon unit is on but if the Aircon is off it seems okey. pls advised.


First, check the level of your power steering fluid and top up the level if low. Then adjust your serpentine belts. A loose belt may be causing the the steering wheel. To adjust your alternator belt . First , take off the negative battery cable so you do not blow an expensive fuse on the positive battery cable clamp. Facing the back of the car, reach UNDER the alternator and loosen the bolt on the bottom right side, now loosen the bolt on the adjuster block on top, you can now turn the adjuster bolt and move the alternator to change or adjust the belt.
To take off or adjust the steering pump belt on the front of the motor, you need to loosen the nut on the back side of the adjuster pulley (right side ,belt is on the left) . With the adjuster pulley loose , you can use the adjuster bolt to move the pulley forward and backward to adjust the steering pump belt tension

Jul 12, 2011 | 1994 Mitsubishi Galant

1 Answer

I am trying to change my 2001 Mitsubishi Mirage (w/ ac) alternator belt. I loosened the tensioner, took out the top - bottom and inside bolt of the ac compressor to take off the first belt and even took...


BEFORE ADJUSTING THE ALTERNATOR BELT DISCONNECT THE NEGATIVE BATTERY CABLE OR YOU MIGHT BLOW AN EXPENSIVE HIDDEN FUSE.
I would replace the steering pump belt at the same time you do the alternator belt (buy both).
To take off the alternator belt .
First , take off the negative battery cable so you do not blow an expensive fuse on the positive battery cable clamp(or a block fuse under the hood). Facing the back of the automobile , reach UNDER the alternator and loosen the bolt on the bottom right side, now loosen the bolt on the adjuster block on top, you can now turn the adjuster bolt and move the alternator to change the belt.
To take off the steering pump belt on the front of the motor, you need to loosen the nut on the back side of the pulley (right side of pump mount), the nut holds the adjuster pulley in place . With the adjuster pulley nut loose , you can use the adjuster bolt to move the pulley to adjust/take off the steering pump belt.

Jun 04, 2011 | 2001 Mitsubishi Mirage

2 Answers

Replacing a alternator belt on a 2002 kia spectra.... another belt in the way cant find what loosens the belt


Please let me know if you have questions, and thanks for using FixYa.

1.8L Engine
A/C Compressor-Power Steering Pump Belt


NOTE Refer to the accompanying illustration for bolt and nut locations.

  1. Loosen bolt A , nut B and nut C
  2. Loosen tension adjusting bolt D
  3. Remove the drive belt

To install:

Route the belt over the pulleys.
jturcotte_1369.gif

Fig. Removing the A/C and P/S pump belt-1.8L engine


  1. Tighten bolt A and nuts B and C, as follows:
    1. Bolt A: 27-39 ft. lbs. (37-53 Nm)
    2. Nut B: 14-19 ft. lbs. (19-25 Nm)
    3. Nut C: 24-34 ft. lbs. (32-46 Nm)

  2. Check the belt tension and adjust as necessary.

Alternator Belt
  1. Remove the A/C and power steering pump belt, if equipped.
  2. Loosen the alternator mounting bolt and adjusting bolt.
  3. Remove the alternator belt.
jturcotte_1370.gif

Fig. Alternator belt-1.8L engine



To install:

  1. Install the alternator belt and adjust, as outlined earlier.
  2. Tighten the bolts, as follows:
    1. Mounting bolt: 27-38 ft. lbs. (37-52 Nm)
    2. Adjusting bolt: 14-18 ft. lbs. (19-26 Nm)

  3. Install the A/C and power steering pump belt, if equipped.
  4. Check the belt tension and adjust as necessary.

Mar 30, 2011 | 2001 Kia Spectra

1 Answer

What do i do to get new belt on


FOR THE 3.0L ENGINE IF YOU REPLACE AC BELT LOOSEN TOP IDLER PULLEY CENTER BOLT. IF YOU REPLACING ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR ADJUSTMENT BOLT AND PIVOT BOLT.IF REPLACING POWER STEERING PUMP BELT LOOSEN POWER STEERING PUMP ADJUSTMENT BOLT AND MOUNTING BOLTS.****** FOR THE 2.4L ENGINE TO REMOVE POWER STEERING BELT LOOSEN TOP IDLER PULLEY.FOR ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR ADJUSTER BOLT, PIVOT AND MOUNTING BOLTS.FOR AC COMPRESSOR LOOSEN LOWER IDLER PULLEY.

Oct 07, 2010 | 1996 Nissan Pickup

1 Answer

I need a diagram to see were my tension-er is


I don't have the figure for your car, but the below figure shows how to remove the A/C belt.
the other belts should have a simple slot in the bracket for adjusting. If you have more questions, let us know.

6f92dc6.jpg
3.0L SOHC Diamante
  1. Disconnect the negative battery cable.
  2. Loosen the lockbolt on the face of the A/C tensioner pulley.
  3. Turn the adjusting bolt of the A/C tensioner pulley to loosen the tension of the A/C belt.
  4. Remove the A/C compressor belt.
  5. Loosen the locknut on the face of the power steering/alternator tensioner pulley.
  6. Turn the adjusting bolt of the tensioner pulley to loosen the tension of the belt.
  7. Remove the power steering/alternator belt.
To install:
  1. Install the power steering/alternator belt first and then the A/C compressor drive belt.
  2. Adjust the belts to the proper tension by turning the adjusting bolts and tighten pulley fixing nut/bolt.
  3. Tighten the mounting nut of the power steering/alternator tensioner pulley to 36 ft. lbs. (50 Nm).

NOTE The manufacturer does not provide a torque specification for the bolt that secures A/C tensioner pulley.
  1. Connect the negative battery cable.

Oct 06, 2010 | 1994 Mitsubishi Diamante

1 Answer

How to change the power steering belt on a 2004 mitsubishi galant


The power steering belt is on the front of the motor and is driven by the crankshaft. Below the steering pump is an adjuster bolt. It moves a pulley underneath the pump. To adjust the belt tension located the nut that tightens the adjuster pulley the the pump bracket . It is on the right side of the bracket , the pulley is on the left facing the back of the car. Loosen the pulley mount nut . You can now turn the adjuster bolt to move the pulley to tighten and loosen the belt for replacement. I recommend replacing the alternator belt at the same time. To do this , Unhook the negative battery cable, loosen the bolt holding block to the slide arm, reach under the alternator and loosen the lower mount bolt, not you can adjust the position of the alternator using the adjuster bolt.

Oct 02, 2010 | 2004 Mitsubishi Galant

1 Answer

How do i change belt on mitubishi mirage 98


( BEFORE ADJUSTING THE ALTERNATOR BELT DISCONNECT THE NEGATIVE BATTERY CABLE OR YOU MIGHT BLOW AN EXPENSIVE HIDDEN FUSE)to change the alternator belt, you have to loosen the lower mount bolt on the alternator, loosen block shaped bolt that the long adjuster bolt goes through, and loosen the belt by turning the long adjuster bolt, take off the belt. to adjust the power steering belt, there is a long adjuster bolt that moves a tensioner pulley, first you have to loosen the nut that holds the pulley in place , now the pulley can be moved with the adjuster bolt.

May 24, 2010 | 1998 Mitsubishi Mirage

1 Answer

How do I go about changing the small belt that goes to the power steering pump on 1998 Toyota Camry with the 2.2 engine


You need to remove the AC/Alternator belt first. There is a pivot bolt on the alternator that needs to be loosened. It faces toward the driver's side under the alternator. Then on top there is a long bolt that needs to be loosened. As it loosens push the alternator down and you will get enough slack to remove the belt.

For the power steering belt, remove the front passenger-side wheel. You will see a black cover(called a fender apron)- remove it. I believe the bolts are 10mm. You can now see the power steering pump- look at the side of the pump that faces the firewall. You will see another long bolt (similar to the AC/Alternator adjustment bolt), loosen it some and push the pump to get slack in the belt.

Jul 24, 2009 | 1998 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...