Question about 1993 Oldsmobile Cutlass Ciera
Posted by Anonymous on
Chances are the horn is no good replace it. if you push on the horn pad and hear a click the horn is bad. as far as the rad have the cooling system flushed. you don`t say what the nasty looks like.
Posted on Jul 01, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First step is see the Condition of the oil.
Them you need to see if the ENGINE is NOT LOCKED UP.
To Do that, you will need a Rachet and Socket to Try TURN the CRANKSHAFT pulley by Hand.
If you are ABLE to Rotate,
And the Battery is good, Check all the Connection from the BATTERY to the STarter motor,
And the Ground Cable. From battery To the Chassis and the Bolt at the Transmission.
But if you are Unable to TURN over the Crankshaft Pulley.
The Engine is Locked up.
And will need to take a Opinion of a Mechanic .
To be sure Of the problem and the condition that may affect to the ENGINE went damaged.
I hope this help on your problem.
Thank you for use fixya...
Posted on Sep 24, 2008
First you have to remove the corner turn signal and grill. Both should be held on with just some hex screws (3 in signal, about 6 in grill). Then you should see 4 black bolts. Unscrew those and the assembly comes right off. : )
Posted on Dec 03, 2008
maybe the wire is severed where the door (drver dr) pivots. thats what was wrong with mine. there is a rubber boot with crinkles in it that hold all the wires together. you can also try replacing the switch board that controls the wndws on the drvr dr. hope that helps.
Posted on Jan 20, 2009
ALL YOU NEED IS 3/8 RATCHET WITH A 5/8 SPARK PLUG SOCKET.YOU NEED EXTENSIONS AND UNIVERSAL JOINTS TO GET TO HARD TO REACH PLACES.YOU NEED A SPARK PLUG GAUGE.YOUR SPARK PLUG GAP SETTING WILL BE. 0.060 THAT WILL BE FOR THE 2.2 AND 3.1 ENGINES.
Posted on Aug 17, 2009
Testimonial: "Thank you very much for your advice and time!"
Tips for a great answer:
Apr 24, 2015 | 1989 Oldsmobile Cutlass Ciera
Dec 08, 2014 | 1994 Oldsmobile Cutlass Ciera
Jul 22, 2013 | 1996 Oldsmobile Cutlass Ciera
Jun 15, 2017 | 1995 Oldsmobile Cutlass Ciera
Aug 14, 2010 | 1993 Oldsmobile Cutlass Ciera
Jul 12, 2010 | 1993 Oldsmobile Cutlass Ciera
Jun 19, 2010 | 1993 Oldsmobile Cutlass Ciera
Apr 21, 2010 | 1990 Oldsmobile Cutlass Ciera
Feb 09, 2010 | 1995 Oldsmobile Cutlass Ciera
Jul 02, 2009 | 1996 Oldsmobile Cutlass Ciera
Sep 26, 2014 | 1993 Oldsmobile Cutlass Ciera
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: