Question about Cars & Trucks

Open Question

Why is my eng throwing code 128s290 05? - Cars & Trucks

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My eng light is on my 2013 nissan frontier truck exten cab what might be the problem thanks

You will need to get the codes read to find out what sensor or sensors are throwing a fault as all the light tells you there is an error with the control system detected

May 30, 2017 | Nissan Cars & Trucks

1 Answer

Mercedes c class 270 cdi my engine seems to draw to much air in for mixture have changed maff valve does it take time for it to work

After changing Maff, it may need a couple drive cycles to reprogram in computer.
Your car should be throwing a fault code (eng. lite) if this was the case. Check for vacuum leaks, lines off, cracked,etc
How To Find Vacuum Leak EricTheCarGuy

Jan 22, 2016 | Cars & Trucks

1 Answer

2006 mercury montego. DTC codes: 2104, 2121, 2126, 2131. Throws a check eng light then the wrench light. Car runs but loses acceleration. ETB and APP sensor changed. No change.

These codes relate to an electronic throttle body fault. Normally its from dirt, hardening oil deposits jamming the throttle body movement. Try cleaning the throttle body first before going down the replacement route. Hope this helps....

Mar 08, 2011 | 2006 Mercury Montego

2 Answers

P0440 evaporation emission control system malfunction

That is a very broad code could be as simple as a gas cap that is loose. or a loose or broken breather hose for your evap system. If you have an after market locking gas cap throw it away and get a factory style cap.

Feb 11, 2011 | 1999 Chevrolet Venture

2 Answers

Check eng. light is on, scanner sais small emissions leak, replaced rubber connecting lines already. Help

Small emission leak would indicate to me that the exhaust is leaking, maybe, throwing off the O2 sensor.

If it's an evaporative leak, then I would make sure the gas cap is on tight, and that the filler tube is connected with a vapor tight connection to the tank, and that the tank has no leaks in it.

What was the code, exactly, if I might ask?

Jan 14, 2011 | 1999 Jeep Cherokee

1 Answer

04 chevy cavalier. clutch started sticking to the floor. loosing fluid but can`t see where?

replace and re bleed clutch accuating cylinder, hoses and resevoir. Possibly a leaking throw out bearing, See if leak is coming from underhood firewall (Drivers side) or from between where eng and trans meet. If leaking at eng trans its the throwout bearing

Jan 08, 2010 | 2004 Chevrolet Cavalier

1 Answer

Eng light comes on idles wont rpm up backfires .

i would go to the air flow meter on a toyota start at the air box go to plenum then throttle body vacuum themn look at fuel injection go towards egr valve ..bad oxy sensors throw eng codes.

May 08, 2009 | 1994 Toyota Camry

1 Answer

2006 gmc 5500 8.1 liter propane

check with gm dealer on possible related bulletin for injectors

Nov 23, 2008 | 2003 GMC Sierra C/K3500

1 Answer

Continuous code for cat. seems to plug up

hard to say i would like to look at it did you check the map & maf sensor are they with in limits

Aug 07, 2008 | 2001 Chevrolet Monte Carlo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides